Porter-Cable 7536 - Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES

2 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personalinjury, including the following: WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTI...

Page 3 - WEAR EAR PROTECTION; ADDITIONAL SAFETY RULES FOR ROUTERS; NEVER

3 8. DRESS PROPERLY. Do not wear loose clothing or jewelry. Loose clothing, draw strings and jewelry can be caught in moving parts. Rubbergloves and non-skid footwear are recommended when working outdoors.Wear protective hair covering to contain long hair. 9. USE SAFETY GLASSES. Wear safety glasses ...

Page 5 - OPERATING INSTRUCTIONS; FOREWORD

5 OPERATING INSTRUCTIONS FOREWORD These Porter-Cable routers are designed for continuous, rugged operation tohandle the most demanding production applications. SELECTING THE BIT These routers accommodate bits with 1 / 2 " diameter shanks that are installed directly into the power unit collet. Co...

Page 7 - ADJUSTING DEPTH OF CUT

7 ASSEMBLING THE MOTOR IN THE ROUTER BASE EQUIPPED WITH TWO HANDLES 1. CAUTION: DISCONNECT MOTOR FROM POWER SOURCE. 2. Loosen the clamp screw (A) Fig. 1 to allow the power unit to be set in the base unit.3. Insert motor unit into base aligning lower pin (B) with groove in base. 4. Rotate motor unit ...

Page 9 - CONNECTING TO POWER SOURCE; Before connecting router to power source ALWAYS; STARTING AND STOPPING THE MOTOR; Before starting the router make sure bit is clear of work

9 CONNECTING TO POWER SOURCE CAUTION: Before connecting router to power source ALWAYS MAKE SURE SWITCH IS IN THE “OFF” POSITION. Also check thatthe power circuit is the same as that shown on specification plate ofthe router. STARTING AND STOPPING THE MOTOR CAUTION: Before starting the router make su...

Page 10 - USING THE ROUTER; Before using your router, consider the kind and total

10 USING THE ROUTER IMPORTANT: Before using your router, consider the kind and total amount of material to be removed. Depending on the material, it maybe necessary to make more than one cut to avoid overloading themotor. Before beginning the cut on the actual workpiece, it isadvisable to make a sam...

Page 11 - Avoid “Climb-Cutting” (cutting in direction opposite that; THE EDGE GUIDE; DISCONNECT ROUTER FROM POWER SOURCE.

11 WARNING: Avoid “Climb-Cutting” (cutting in direction opposite that shown in Fig. 8), “Climb-Cutting” increases the chance for loss of control resulting in possible personal injury. When “Climb-Cutting” isrequired (backing around a corner), exercise extreme caution to maintaincontrol of router. Th...

Page 12 - MAINTENANCE; KEEP TOOL CLEAN; Wear safety glasses while using compressed air.; FAILURE TO START

MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. Removebuildup of grime resulting from working with green or sappy wood. All plasticparts should be cleaned with a soft damp cloth. NEVER use solvents to cleanplastic parts. They could possibly dissolve or oth...

Page 13 - ACCESSORIES; TEMPLET GUIDES

ACCESSORIES The testing of these tools has been accomplished with the use of thefollowing accessories ONLY. For safest operation, it is recommended thatONLY these accessories be used with this product. WARNING: Since accessories other than those listed have not been tested with this product, use of ...

Page 14 - ONE YEAR WARRANTY; Distance; – For all templet guides

14 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of originalpurchase. We will repair or replace at our option, any part or parts of the product and accessoriescovered under this warranty which, after examination, prov...

Page 15 - PORTER-CABLE SERVICE CENTERS; DELTA SERVICE CENTERS

The following are trademarks of PORTER-CABLE Corporation (Las siguientes son marcas registradas de PORTER-CABLE S.A.) (Les marquessuivantes sont des marques de fabriquant de la PORTER-CABLE Corporation): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER-CABL...

Porter-Cable 7536 - Manual

Table of Contents:

Summary

Other Porter-Cable Models