Porter-Cable 7428 - Manual

Porter-Cable 7428

Porter-Cable 7428 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
Page: / 11

Table of Contents:

  • Page 2 – GENERAL SAFETY RULES; WORK AREA
  • Page 4 – SPECIFIC SAFETY RULES AND SYMBOLS; Accessories must be rated for at least the speed recommended on; Wheels and other accessories running over rated; H o l d t o o l b y i n s u l a t e d g r i p p i n g s u r f a c e s w h e n p e r f o r m i n g a n; Contact with a “live” wire will also make exposed metal parts of the
  • Page 5 – MOTOR; Do not operate your tool on a current on which the; EXTENSION CORD SELECTION; FUNCTIONAL DESCRIPTION; FOREWORD; ASSEMBLY; TO INSTALL BAILING HANDLE; NOTE: This bailing handle SHOULD BE
  • Page 6 – TO INSTALL BACK-UP PAD; OPERATION; TO START AND STOP THE MACHINE
  • Page 7 – DO NOT HOLD
  • Page 8 – POLISHING TIPS; For best results, thoroughly clean surface to be polished.; MAINTENANCE; KEEP TOOL CLEAN; Wear safety glasses while using compressed air.; FAILURE TO START
  • Page 9 – SERVICE AND REPAIRS; ACCESSORIES; for a catalog or for the name of your nearest; Since accessories, other than those offered by
  • Page 10 – ONE YEAR WARRANTY
Loading the manual

Double Insulated
Disc Polisher

Instruction

manual

The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who is
to use this equipment carefully reads and
u n d e r s t a n d s t h e s e i n s t r u c t i o n s b e f o r e
starting operations.

Part No. 293741 - 09-30-01

MODEL

7428

ESPAÑOL: PÁGINA 11
FRANÇAISE : PAGE 21

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2001 PORTER-CABLE Corporation

293741 - 09-30-01.qxd 2/13/02 9:31 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - GENERAL SAFETY RULES; WORK AREA

2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES c o n t a i n s c h e m i c a l s k n o w n t o c a u s e c a n c e r , b i r t h d e f e c t s o r o t h e rreproductive harm. Some examples of these chemicals are:• lead from lead-based pai...

Page 4 - SPECIFIC SAFETY RULES AND SYMBOLS; Accessories must be rated for at least the speed recommended on; Wheels and other accessories running over rated; H o l d t o o l b y i n s u l a t e d g r i p p i n g s u r f a c e s w h e n p e r f o r m i n g a n; Contact with a “live” wire will also make exposed metal parts of the

4 SPECIFIC SAFETY RULES AND SYMBOLS 1. Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can fly apart and cause injury. 2. H o l d t o o l b y i n s u l a t e d g r i p p i n g s u r f a c e s w h e n p e r ...

Page 5 - MOTOR; Do not operate your tool on a current on which the; EXTENSION CORD SELECTION; FUNCTIONAL DESCRIPTION; FOREWORD; ASSEMBLY; TO INSTALL BAILING HANDLE; NOTE: This bailing handle SHOULD BE

MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60cycle A.C. current and voltage within plus or minus 5 percent of that shownon the specification plate on the tool. Several models, however, are designedfor A.C. current only. Refer to the specification plate on your t...

Other Porter-Cable Models