Porter-Cable 6645 - Manual

Porter-Cable 6645

Porter-Cable 6645 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
Page: / 13

Table of Contents:

  • Page 2 – GENERAL SAFETY RULES; WORK AREA
  • Page 4 – VERIFY; performed before starting tool.; DO NOT; attempt to change direction of rotation while switch is “ON”. To; SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC.; There are certain applications for which this tool was; REPLACEMENT PARTS; When servicing use only identical replacement parts.
  • Page 5 – MOTOR; Do not operate your tool on a current on which the voltage; EXTENSION CORD SELECTION; FUNCTIONAL DESCRIPTION; FOREWORD; Commercially available Drywall Screws; ASSEMBLY and OPERATION; TO START AND STOP SCREWDRIVER; MAKE SURE SWITCH IS OFF BEFORE CONNECTING
  • Page 9 – TO REMOVE SCREWS –; ALL MODELS; MAINTENANCE; KEEP TOOL CLEAN; hand
  • Page 10 – The housing threads; BRUSH INSPECTION AND LUBRICATION
  • Page 11 – ACCESSORIES; for a catalog or for the name of your nearest; Since accessories other than those offered by
  • Page 12 – ONE YEAR WARRANTY
Loading the manual

Double Insulated
Portable Electric
Screwdrivers

Instruction

manual

The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.

Model No. ______________________________________

Type ___________________________________________

Serial No. _______________________________________

IMPORTANT

Please make certain that the person who
is to use this equipment carefully reads
and understands these instructions before
starting operations.

Part No. 902387 - 10-31-01

ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 25

Drywall Drivers
Depth Sensing
MODEL 6640 0/4000 RPM
MODEL 6645 0/2500 RPM

Fastener Drivers
Depth Sensing
MODEL 6641 0/2500 RPM
MODEL 6642 0/2000 RPM

To learn more about Porter-Cable

visit our website at:

http://www.porter-cable.com

Copyright © 2001 PORTER-CABLE Corporation

902387 - 10-31-01.qxd 2/12/02 3:29 PM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - GENERAL SAFETY RULES; WORK AREA

2 WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects or otherreproductive harm. Some examples of these chemicals are:· lead from lead-based paints,· crystalline silica from bricks and ceme...

Page 4 - VERIFY; performed before starting tool.; DO NOT; attempt to change direction of rotation while switch is “ON”. To; SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC.; There are certain applications for which this tool was; REPLACEMENT PARTS; When servicing use only identical replacement parts.

SPECIFIC SAFETY RULES AND SYMBOLS FORSCREWDRIVERS 1. VERIFY direction of rotation of screwdriver is correct for operation to be performed before starting tool. 2. DO NOT attempt to change direction of rotation while switch is “ON”. To do so may damage interlock feature built into switch. Be sure swi...

Page 5 - MOTOR; Do not operate your tool on a current on which the voltage; EXTENSION CORD SELECTION; FUNCTIONAL DESCRIPTION; FOREWORD; Commercially available Drywall Screws; ASSEMBLY and OPERATION; TO START AND STOP SCREWDRIVER; MAKE SURE SWITCH IS OFF BEFORE CONNECTING

5 MOTOR Many Porter-Cable tools will operate on either D.C., or single phase 25 to 60cycle A.C. current and voltage within plus or minus 5 percent of that shown onthe specification plate on the tool. Several models, however, are designed forA.C. current only. Refer to the specification plate on your...

Other Porter-Cable Models