Polaroid IP100 - Manual

10 11 IP100 Manual 4 Viewing the IP camera on a LAN 4.1 Connecting via a LAN 4.2 Searching for and setting the device IP address Before searching for your IP camera via the IP Camera Tool function: 1. Make sure the IP camera’s network cable is plugged in and that there is a good connection with the ...

12 13 IP100 Manual • Network Configuration – When you click on Network Configuration, a box will open that allows you to configure you network settings. You can configure the network as follows: IP address: Fill in the assigned IP address, making sure it has the same subnet as the gateway, the compu...

14 15 IP100 Manual IP address directly into your browser. For example: http://192.168.1.111:8999. (We recommend you use Internet Explorer as your browser due to its increased functionality.) At the camera’s login interface, enter the correct User name (default: admin) and Password (default: no passw...

16 17 IP100 Manual 4.4 IP camera operation 4.4.1 Visitor status users If the status indicator for an IP camera is lit, a user logged in as a visitor has only the lowest level of operation which is mainly that of detection (viewable only via Internet Explorer) The Device Status indicator is located a...

18 19 IP100 Manual Direction control: Users can click on the arrows to change the direction of the camera view. Reverse image (up and down) Mirror image (right and left) Resolution: The resolution can be set at up to 640 X 480 for VGA displays and up to 320 X 240 for QVGA displays. Work Mode: 50Hz/6...

20 21 IP100 Manual Related settings and IP camera login 1. To view your IP camera via the intenet, open a browser and enter your external/public internet IP address into the address bar, then a colon sign (:), and then enter the port number (for example, 192.168.1.10:8090). That should bring up your...

24 25 IP100 Manual To use UPnP to set the port mapping function successfully, first check to make sure your router’s UPNP setting is on. If the UPnP function is unavailable, refer to the user manual for the router for details on how to enable the router’s UPnP setting. If you use TP-LINK router, ple...

26 27 IP100 Manual At the login prompt enter your User name and password. The default User name is: admin. There is no password. Select your language from the drop down box and click the “Sign in” button. If your login is successful you will be able to view live video. Android phone: From the device...

28 29 IP100 Manual in the browser. For example: http://c0001.topipcam.org：8999 Type in the IP camera’s User name and password at the login interface and click the “Sign in” button. 6.2 Install client-side software to access the IP camera This IP camera system supports both client-side software and s...

32 33 IP100 Manual 7 Other settings 7.1 Network Settings 7.11 Basic Network Settings If the router your IP camera is connected to has the DHCP function, you can check the box to “Obtain IP from DHCP Server.” If it does not, make sure the box is unchecked so you can manually fill in the network param...

40 41 IP100 Manual From your IP camera’s MSN account page, open a chat dialogue box and type in “URL?” After several seconds you will receive a reply with a remote access IP First, login and click on Contacts. Select Add a Contact and then fill the contact’s MSN account information (email address) i...

42 43 IP100 Manual DDNS Service: The IP camera system supports protocols from several DDNS providers. These DDNS providers include: Dyndns.org, topipcam.org, Peanut Shell, 3322.org. To use DDNS, you must already have a registered account, User name, Password, and Host (see section 5 for details). Th...

48 49 IP100 Manual 6. Click on the Test button to confirm setup and testing is successful. When your IP camera alarms, images will be uploaded to your FTP server, according to the settings of the main directory path (see below) FTP Server: The FTP server IP address. FTP Port: The port is usually 21....

52 53 IP100 Manual 7.8 Upgrade Device Firmware Firmware upgrade The IP camera system has two kinds of programs. One is system firmware, and the other is application firmware. Each can be upgraded separately. 7.9 Backup & Restore Settings - Backup: You can back-up your established IP camera setti...

58 59 IP100 Manual 8.2 IP Camera Abbreviations & Terminology IPCAM: Refers to the IP Camera Tool, used for IP camera control settings User Name: user Password: password Pri: Access level priority (1: visitor, 2: operator, 3: Administrator) Resolution: Image resolution (8: 320X240 QVGA, 32: 640X4...

60 61 IP100 Manual As shown in the following picture, It can see the ip camera send video streaming format 8.3 Frequently Asked Questions Note: 1. If you encounter any difficulties during either the setup or running of your IP Security Camera system, you should first check all the network connection...