Planet WGSD-910 - Manual

WGSD-910

Cost-effective Desktop Size / Fiber Capability / Group Managed

Switch

The PLANET WGSD-910 is a Desktop size L2 Managed Fast Ethernet
Switch. It provides 8 10/100Mbps Fast Ethernet ports and 1 Gigabit TP/SFP
interface. The Compact-size design not only makes the Desktop Switch
fit into space-limited environment but also is mountable in a 19-inch rack
with attached rack-mounting kits. The equipped Gigabit SFP slot makes
it with capability of fiber link for distance extending and can handle
extremely large amounts of data in a secured topology which is linked to a
backbone or high capacity servers.
The various support of QoS mode and VLAN features make the WGSD-910
meet the needs of effective data traffic control for SOHOs, SMBs and
Enterprises, such as VoIP, video streaming and multicast applications. The
key features are shown as below:
• IP Stacking up to 8 units

• 802.1Q VLAN

• Rapid Spanning Tree

• SNMP / SNMP Trap

• IGMP Snooping

• SFP slots, Fiber link capability

Enhanced Layer 2 Features

The WGSD-910 can be programmed for basic switch management
functions, such as per port speed configuration, Port Trunking, VLAN,
Rapid Spanning Tree, QoS, bandwidth control and IGMP Snooping. The
WGSD-910 provides Port-based VLAN, 802.1Q Tagged VLAN. And the
VLAN groups allowed on the WGSD-910 will be maximally up to 255. Via
supporting port trunking, the WGSD-910 offers the operation of a high-
speed trunk combining multiple ports. It also provides four groups of up to
8 ports for trunking and supports fail-over as well.

Efficient Management – Stacking Management

For efficient management, the WGSD-910 is equipped with console
interface, Web interface and SNMP agent. With its built-in Web-based
management, the PLANET WGSD-910 offers an easy-to-use, platform-
independent management and configuration facility. It supports standard
Simple Network Management Protocol (SNMP) and can be managed via
any standard-based management software. For text-based management,
the WGSD-910 can also be accessed via Telnet and the console port.
One of the management features of WGSD-910 is the IP Stacking function
support. It helps network managers to easily configure up to 8 switches in
the same series via one single IP address instead of connecting and setting
each unit one by one.

Data Sheet

Key Features

PhySiCaL Port

8-Port 10/100Base-TX RJ-45

1-Port GiGabit tP/SFP CoMbo intErFaCE LayEr 2
FEaturES

Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE
802.3z Gigabit Ethernet standard

Auto-negotiation and half duplex/full duplex modes for all
10Base-T/100Base-TX and 1000Base-T ports.

High performance of Store–and-Forward architecture, broadcast
storm control and runt/CRC filtering eliminate erroneous packets
to optimize the network bandwidth

IEEE 802.1Q Tagged based VLAN and Port-based VLAN

Up to 4 Trunk groups, each trunk can be up to maximum 8 port
with 1.6Gbps bandwidth(Duplex Mode)

IEEE 802.1d, IEEE 802.1w, classic Spanning Tree Algorithm or
Rapid Spanning Tree support

QuaLity oF SErviCE

4 priority queues on all switch ports.

Strict priority and Weighted Round Robin (WRR) CoS policies

QoS and bandwidth control on each port

MuLtiCaSt

IGMP Snooping v1 and v2

IGMP Port and Group policy

SECurity

IEEE 802.1x Port-Based Authentication, RADIUS server
authentication or Local account authentication

MAC address Filtering and MAC address Binding

Port Mirroring to monitor the incoming or outgoing traffic on a
particular port

ManaGEMEnt

WEB-based, Telnet, Console Command Line management

Access through SNMP v1 and v2c set and get requests.

Four groups (history, statistics, alarms, and events) of embedded
remote monitoring (RMON) agents for network monitoring and
traffic analysis

EMI standards comply with FCC, CE class

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

8-Port 10/100Mbps + 1-Port Gigabit TP/SFP Combo
Managed Switch