Planet ENW-9504 - Manual
Planet ENW-9504 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hardware Description; Hardware Installation
- Page 3 – Specifications
- Page 4 – Software Driver Support
- Page 6 – SAFETY INSTRUCTIONS
PLANET ENW-9503/9504 PCI Fast Ethernet Adapter
User's Manual
Thank you for purchasing our product!
This guide contains information to install and configure the 10/100 Fast Ethernet PCI
Adapter for proper operation. The 10/100 Fast Ethernet PCI Adapter is a 32-bit
10/100 Mbps Ethernet network interface card for PCI local bus-compliant PCs. It
supports bus mastering architecture and auto-negotiation which make it possible to
use one common RJ-45 port and standard twisted-pair cabling for both 10 Mbps and
100 Mbps connection. Extensive driver support for commonly used network operating
systems is also provided.
Package Contents
Carefully unpack the contents of the package and verify them against the checklist
below.
PLANET ENW-9503/9504 10/100 Fast Ethernet PCI Adapter
10/100 Fast Ethernet PCI Adapter
CD Disk (included User's Manual)
Please inform your dealer immediately should there be any incorrect, missing or
damaged parts.
If possible, retain the carton, including the original packing materials.
Use them again to repack the product in case there is a need to return it for repair.
Back up your Driver Diskette and use the copy as the working diskette. Do this to
protect the original from accidental damage.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Hardware Description The ENW-9504 10/100 Fast Ethernet PCI Adapter has a RJ-45 connector and one LED indicator. LED Indicator The adapter provides LED indicator for monitoring network conditions. This section describes the function of LED. LED Color Status Description Off This card is not connect to...
3. Connect your adapter to the network. Connect the adapter to the network using twisted-pair cabling with an RJ-45 connector. 4. Power on the PC. After hardware installation has been completed, power on the computer. 5. Change your computer's BIOS setup to enable Bus Master mode and select an IRQ s...
Operating Environment Power Consumption : 100BASE-TX +5V/360mA (maximum) 10BASE-T +5V/350mA (maximum) Temperature : 0C to 55C/32F to 131F Humidity : 10% to 90% (Non-condensing) Size : 123mm x 65mm Hardware Certification Certification : CE Mark Emissions : FCC Class B, VCCI Class 2, CISPR22 Class B I...
