Page 2 - Contents
1 Contents Key Finder .................................................... 3 - Head Unit - Remote Controller (CD-R600) Before Using This Product ...................... 4 About This Product .......................................... 4About This Manual ............................................ 4Pre...
Page 3 - Detaching and Replacing
Using Multi-CD Players .......................... 26 - Repeat Play (REPEAT) - Random Play (RANDOM) - Scan Play (SCAN) - Pause (PAUSE) ITS (Instant Track Selection) .......................... 28 - ITS Programming (ITS) - ITS Play (ITS-P) - Erase a Track Program - Erase a Disc Program Disc Title ........
Page 4 - Key Finder; Head Unit
Key Finder 3 Head Unit Remote Controller (CD-R600) The remote controller (CD-R600) enabling remote control of the head unit is sold separate-ly. Operation is the same as when using buttons on the head unit. ATT buttonThis lets you quickly lower volume level (by about 90%).Press once more to return t...
Page 5 - Before Using This Product; About This Product
4 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Before Using This Product About This Product The tuner frequencies on this product are allocated for use in Western Europe, Asia, theMiddle East, Africa and Oceania. Use in other areas may result in improper reception. TheRDS function operates o...
Page 6 - Precaution; In Case of Trouble
5 Before Using This Product Precaution • A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player. • The Pioneer CarStereo-Pass is for use only in Germany.• Keep this manual handy as a reference for operating procedures and precautions.• Always keep the volume low enough for outside so...
Page 7 - Basic Operation; To Listen to Music
Basic Operation 6 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS To Listen to Music The following explains the initial of operations required before you can listen to music. Note: • Loading a disc in this product. (Refer to page 8.) 1. Select the desired source (e.g. Tuner). Each press of the ...
Page 8 - Basic Operation of Tuner; • You can select the tuning method by changing the length of time you
7 Basic Operation Basic Operation of Tuner This product’s AF function can be switched ON and OFF. AF should be switched OFF fornormal tuning operations. Manual and Seek Tuning • You can select the tuning method by changing the length of time you press the 2 / 3 button. Manual Tuning (step by step) 0...
Page 9 - Basic Operation of Built-in CD Player; the
8 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Basic Operation of Built-in CD Player Track Search and Fast Forward/Reverse • You can select between Track Search or Fast Forward/Reverse by pressing the 2 / 3 button for a different length of time. Track Search 0.5 seconds or less Fast Forward/...
Page 10 - Basic Operation of Multi-CD Player; Track Search and Fast Forward/Reverse; corresponding to the disc you want to listen to.; Play Time Indicator
9 Basic Operation Basic Operation of Multi-CD Player This product can control a Multi-CD player (sold separately). Track Search and Fast Forward/Reverse • You can select between Track Search or Fast Forward/Reverse by pressing the 2 / 3 button for a different length of time. Track Search 0.5 seconds...
Page 11 - Corresponding Display Indications and Buttons; Entering the Function Menu
Corresponding Display Indications and Buttons This product’s display features Key Guidance Indicators. These light to indicate which ofthe 5 / ∞ / 2 / 3 , FUNCTION and AUDIO buttons you can use. When you’re in the Function Menu (refer to next section), Detailed Setting Menu (refer to page 13), Initi...
Page 12 - Function Menu Functions; Page
11 Basic Operation 2. Operate a mode. (e.g. Repeat Play) 3. Cancel the Function Menu. Function Menu Functions The following chart shows functions for each source in the Function Menu.The chart also shows indications for each function, operations and buttons used to performoperations. For more detail...
Page 14 - Entering the Detailed Setting Menu
13 Basic Operation Entering the Detailed Setting Menu In the Detailed Setting Menu, you can operate convenient, complex functions for eachsource. 1. Enter the Detailed Setting Menu. 2. Select the desired mode. (Refer to next section, “Detailed Setting Menu Functions”.) 3. Operate a mode. 4. Cancel t...
Page 15 - Detailed Setting Menu Functions
Detailed Setting Menu Functions The following chart shows functions for each source in the Detailed Setting Menu. The chart also shows indications for each function, operations and buttons used to performoperations. For more details, or when you want to know about an operation, refer to thepage numb...
Page 16 - Tuner Operation
15 Tuner Operation Local Seek Tuning (LOCAL) When Local mode is ON, you can only select broadcast stations providing strong recep-tion. FM : LOCAL 1 Ô LOCAL 2 Ô LOCAL 3 Ô LOCAL 4 MW/LW : LOCAL 1 Ô LOCAL 2 Note: • The LOCAL 4 setting allows reception of only the strongest stations, while lower settin...
Page 17 - Using RDS Functions; Program Service Name Display; PTY Information; Frequency
Using RDS Functions What is RDS? RDS (Radio Data System) is a system for transmitting data along with FM programs. Thisdata, which is inaudible, provides a variety of features such as: program service name, pro-gram type display, traffic announcement standby, automatic tuning and program type tun-in...
Page 18 - Activating/Deactivating the AF Function; Activate or deactivate AF while in an FM band.
17 Using RDS Functions AF Function (AF) The AF (Alternative Frequencies search) function is used to search for other frequencies inthe same network as the currently tuned station. It automatically retunes the receiver toanother frequency in the network which is broadcasting a stronger signal when th...
Page 19 - PI Seek Function; PI Seek; Activating/Deactivating the REG Function; Press the FUNCTION button and select the REG mode (REG) in the
PI Seek Function The tuner searches for another frequency broadcasting the same programming. “PI SEEK”appears on the display and the radio volume is muted during a PI Seek. The muting is discon-tinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seekis unsucce...
Page 20 - Activating/Deactivating the TA Function
19 Using RDS Functions TA Function (TA) The TA (Traffic Announcement standby) function lets you receive traffic announcementsautomatically, no matter what source you are listening to. The TA function can be activat-ed for either a TP station (a station that broadcasts traffic information) or an EON ...
Page 21 - Canceling Traffic Announcements; to cancel the announcement and return to the original source.; Adjusting the TA Volume
Canceling Traffic Announcements • Press the TA/NEWS button while a traffic announcement is being received to cancel the announcement and return to the original source. The announcement is canceled but the tuner remains in the TA mode until the TA/NEWSbutton is pressed again. Adjusting the TA Volume ...
Page 22 - PTY Function; Searching the PTY
21 Using RDS Functions PTY Function With Wide and Narrow classification of program type, the PTY function provides twoways to select stations by the type of program being broadcast (PTY Search). It also pro-vides automatic tuning to emergency broadcasts (PTY Alarm). Note: • There’s no need to perfor...
Page 23 - News Program Interruption Setting; • Set interruption to ON or OFF.; PTY Alarm; cancel the announcement and return to the previous source.
News Program Interruption Setting You can switch automatic reception of PTY code news programs ON/OFF. When areceived news program ends, reception of the previous program resumes. • Set interruption to ON or OFF. PTY Alarm PTY Alarm is a special PTY code for announcements regarding emergencies such ...
Page 24 - PTY List; Wide
23 Using RDS Functions PTY List Wide Narrow Details NEWS/INF NEWS News. AFFAIRS Current affairs. INFO General information and advice. SPORT Sports programs. WEATHER Weather reports/Meteorological information. FINANCE Stock market reports, commerce, trading etc. POPULAR POP MUS Popular music. ROCK MU...
Page 25 - Using the Built-in CD Player; Switch the Random Play
Using the Built-in CD Player 24 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Repeat Play (REPEAT) Repeat Play plays the same track repeatedly. Note: • If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled. Random Play (RANDOM) Random Play plays the tracks...
Page 27 - Using Multi-CD Players; Display; Press the FUNCTION button and select the Repeat Selecting mode
Using Multi-CD Players Repeat Play (REPEAT) There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD playerRepeat. Default repeat play range is Multi-CD player Repeat. Note: • If you select other discs during the repeat play, the repeat play range changes to Multi-CD player Rep...
Page 29 - with the
ITS (Instant Track Selection) The ITS function allows you to search for the track you wish to play when a Multi-CDplayer is installed. You can use ITS to program automatic playback of up to 24 tracks perdisc from up to 100 discs. (You can store ITS program and Disc Title data for up to 100discs in m...
Page 30 - Erase a Track Program; Erase the disc program with
Using Multi-CD Players Erase a Track Program Erase a Disc Program 3. Erase the disc program with the ∞ button. 2. Select the ITS Programming mode (ITS) in the Detailed Setting Menu. (Refer to page 13.) 1. Select the disc you wish to erase, while the disc is playing. 3. Erase the track program with t...
Page 31 - When you have completed title
Disc Title Disc Title Input (TITLE IN) You can input Titles up to 10 letters long for up to 100 discs. Using this function lets youeasily search for and select a desired disc for play. (You can store ITS program and DiscTitle data for up to 100 discs in memory.) Note: • When playing a CD TEXT disc o...
Page 32 - Selecting Discs by Disc Title List (TITLE LIST)
Using Multi-CD Players Selecting Discs by Disc Title List (TITLE LIST) Follow the procedures below to play a disc for which you have input the title in a Multi-CD player or a CD TEXT disc on a CD TEXT compatible Multi-CD player. Displaying Disc Title You can display the currently playing Disc Title....
Page 33 - CD TEXT Function (for CD TEXT compatible type); Title Display Switching; • Select the desired title display
Compression and DBE (COMP/DBE) Using the COMP (Compression) and DBE (Dynamic Bass Emphasis) functions enablesMulti-CD player sound quality adjustment. Each of the functions enables two-step adjust-ment. COMP/DBE ON/OFF Switching Note: • You can use these functions with a Multi-CD player that has the...
Page 34 - Title Scroll; Playing Discs on a 50-Disc Type Multi-CD Player; Disc Number Rough Search; • Scroll the title display by
33 Using Multi-CD Players Title Scroll This product displays the first 10 letters only of Disc Title, Artist Name and Track Title.With text longer than 10 letters, you can see the rest of the text by scrolling. Playing Discs on a 50-Disc Type Multi-CD Player When a magazine is loaded into a 50-Disc ...
Page 35 - Audio Adjustment; Selecting the Equalizer Curve; Move the EQ button up or down to select the desired Equalizer curve.; Entering the Audio Menu; Select the desired mode in the Audio Menu.
Audio Adjustment Selecting the Equalizer Curve You can switch between Equalizer curves. • Move the EQ button up or down to select the desired Equalizer curve. POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = EQ FLAT + = SUPER BASS Note: • “CUSTOM” stores an equalizer curve you have made adjustments to....
Page 36 - Audio Menu Functions; ance with the
35 Audio Adjustment Audio Menu Functions The Audio Menu features the following functions. Balance Adjustment (FADER) This function allows you to select a Fader/Balance setting that provides ideal listening con-ditions in all occupied seats. 1. Press the AUDIO button and select Fader/Balance mode (FA...
Page 38 - Equalizer Curve Fine Adjustment; Select the desired Q factor with
37 Audio Adjustment Equalizer Curve Fine Adjustment You can adjust the center frequency and the Q factor (curve characteristics) of each cur-rently selected curve band (EQ-LOW/MID/HIGH). Adjusted equalizer curve settings arememorized in “CUSTOM”. 1. Press the AUDIO button for 2 or more seconds to se...
Page 39 - Select the desired level with the; Switch the Loudness function
Loudness Adjustment (LOUD) The Loudness function compensates for deficiencies in the low and high sound ranges atlow volume. You can select a desired Loudness level. 1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu. Front Image Enhancer Function (FIE) The F.I.E. (Front...
Page 40 - Compare the FM volume with the volume of the other source.
39 Audio Adjustment Source Level Adjustment (SLA) The SLA (Source Level Adjustment) function prevents radical leaps in volume whenswitching between sources. Settings are based on the FM volume, which remainsunchanged. (Since the FM volume is the control, SLA is not possible in the FM modes.)The MW/L...
Page 41 - Detaching and Replacing the Front Panel; Theft Protection; Detaching the Front Panel; • Replace the front panel by
Detaching and Replacing the Front Panel Theft Protection The front panel of the head unit is detachable to discourage theft. Detaching the Front Panel Replacing the Front Panel Precaution: • Never use force or grip the display tightly when removing or replacing the front panel. • Avoid subjecting th...
Page 42 - Initial Setting; Entering the Initial Setting Menu
Initial Setting Entering the Initial Setting Menu With this Menu, you can perform initial settings for this product. 1. Switch the sources OFF. 2. Enter the Initial Setting Menu. 3. Select the desired mode. 4. Operate a mode. 5. Cancel the Initial Setting Menu. Note: • Holding down the FUNCTION butt...
Page 43 - Initial Setting Menu Functions
Initial Setting Menu Functions The Initial Setting Menu features the following functions. Changing the FM Tuning Step (FM STEP) Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated.It may be preferable to set tuning step to ...
Page 44 - Select the desired illumination
Initial Setting Switching the AUX Mode (AUX) It is possible to use auxiliary (AUX) equipment with this product.Activate the AUX mode when using external equipment with this product. Selecting the Illumination Color (ILL. CLR) This product is equipped with two illumination colors, green and red.You c...
Page 45 - Other Functions; Setting the PGM Button; Select the function you want to memorize in the PGM button.
Other Functions Using the PGM Button (PGM-FUNC) The PGM button can memorize one of the functions in the Function Menu.It is possible to memorize a different function for each source.PGM button operations are only possible with the remote control. Some remote controls,such as a steering remote contro...
Page 46 - Using the PGM Button; • Use the PGM button.
Other Functions Using the PGM Button The PGM button operates in a different way depending on the function programmed(memorized). • Use the PGM button. 7 Tuner Function Name (Display) Press Hold for 2 seconds Best Stations Memory (BSM) OFF ON Local Seek Tuning (LOCAL) ON/OFF Entering the Local Seek S...
Page 47 - Using the AUX Source; Selecting the AUX Source; Cellular Telephone Muting
Using the AUX Source It is possible to use auxiliary (AUX) equipment with this product.To listen to auxiliary equipment, switch the AUX Mode in the Initial Setting Menu ON,and then select the desired source. Selecting the AUX Source • Select AUX. (Refer to page 6.) AUX Title Input The display title ...
Page 48 - CD Player and Care; Built-in CD Player’s Error Message; Message
47 CD Player and Care Precaution • Play only CDs bearing the Compact Disc Digital Audio mark. • This product is designed for use with conventional, fully circular CDs only. Use of shaped CDs are notrecommended for this product. • Check all CDs before playing and discard cracked, scratched or warped ...
Page 49 - Specifications
Specifications General Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)Grounding system ........................................ Negative typeMax. current consumption ...................................... 10.0 ADimensions (mounting size) ...... 178 (W) × 50 (H) × 159 (D) mm (front face) ...
Page 50 - Contenido; Uso del reproductor de
1 Contenido Guía de botones ........................................ 3 - Unidad principal - Controlador remoto (CD-R600) Antes de usar este producto .................... 4 Sobre este producto .......................................... 4Sobre este manual .................................................
Page 51 - Extracción y colocación del panel
Uso de reproductores de Multi-CD ...... 26 - Reproducción de repetición (REPEAT) - Reproducción aleatoria (RANDOM) - Reproducción con exploración (SCAN) - Pausa (PAUSE) ITS (Selección de canción instantánea) .......... 28 - Programación ITS (ITS) - Reproducción ITS (ITS-P) - Borrado de una pista pro...
Page 52 - Guía de botones; Unidad principal
Guía de botones 3 Unidad principal Controlador remoto (CD-R600) El controlador remoto (CD-R600) que permite el control remoto de la unidad principal sevende separadamente. La operación es idéntica a la de los botones en la unidad principal. Botón ATTEste botón le permite bajar el nivel del volumenrá...
Page 53 - Antes de usar este producto; Sobre este producto
4 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Antes de usar este producto Sobre este producto Las frecuencias del sintonizador en este producto se han repartidas para uso en EuropaOccidental, Asia, Oriente Medio, Africa y Oceanía. El uso en otras áreas puede resultar enrecepción inapropiada...
Page 54 - Precaución; En caso de problema
5 Antes de usar este producto Precaución • Una etiqueta con la inscripción “CLASS 1 LASER PRODUCT” se fija en la parte inferior del reproductor. • El Pioneer CarStereo-Pass es para uso solamente en Alemania.• Guarde este manual a mano como referencia para los procedimientos de operación y precaucion...
Page 55 - Operación básica; Para escuchar música
Operación básica 6 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Para escuchar música A continuación se explican los preparativos requeridos antes que se pueda escuchar lamúsica. Nota: • Debe haber un disco en el producto. (Vea la página 8.) 1. Seleccione la fuente deseada. (tal como el sinto...
Page 56 - Operación básica del sintonizador; Indicador de banda
7 Operación básica Operación básica del sintonizador La función AF de este producto se puede activar y desactivar. Se debe desactivar la función AF para operaciones de sintonización normales. Indicador de númeropreajustado Indicador de banda Banda FM 1 = FM 2 = FM 3 = MW/LW Indicador de frecuencia S...
Page 57 - Operación básica del reproductor de CD incorporado; Indicador de número de pista; Búsqueda de pista y avance rápido/retroceso
8 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Operación básica del reproductor de CD incorporado Indicador de tiempo dereproducción Indicador de número de pista Cambio de la presentación visual A cada presión del botón DISPLAY cambia la presentación visual en el ordensiguiente:Modo de repro...
Page 58 - Operación básica del reproductor de Multi-CD; presionar el número correspondiente al disco que desea escuchar.; • Se puede seleccionar entre la búsqueda de
9 Operación básica Operación básica del reproductor de Multi-CD Este producto puede controlar un reproductor de Multi-CD (en venta por separado). Indicador de tiempo de reproducción Búsqueda de disco Indicador de número de disco Indicador de número de pista Búsqueda de número de disco (para tipos de...
Page 59 - Visualizaciones y botones correspondientes; Selección del menú de funciones; Continúa en la siguiente hoja.
10 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Visualizaciones y botones correspondientes El visualizador de este producto presenta los indicadores de guía de botones. Estos indi-cadores se iluminan para indicar qué botones 5 / ∞ / 2 / 3 , FUNCTION y AUDIO se pueden utilizar. Cuando se está...
Page 60 - Funciones del menú de funciones; Página
11 Operación básica 2. Opere un modo. (tal como la reproducción de repetición) 3. Cancele el menú de funciones. Funciones del menú de funciones En la siguiente tabla se muestran las funciones para cada fuente en el menú de funciones.En la tabla también se muestran las indicaciones para cada función,...
Page 61 - Reproductor de CD incorporado; Reproductor de Multi-CD
7 Reproductor de CD incorporado Nombre de la función (Visualización) Botón : Operación Página Reproducción de repetición (REPEAT) 5 : Active 24 ∞ : Desactive Reproducción aleatoria (RANDOM) 5 : Active 24 ∞ : Desactive Reproducción con exploración (T-SCAN) 5 : Active 25 ∞ : Desactive Pausa (PAUSE) 5 ...
Page 62 - Selección del menú de ajustes detallados; Seleccione el menú de ajustes detallados.
13 Operación básica Selección del menú de ajustes detallados En el menú de ajustes detallados, se pueden ejecutar funciones convenientes y complejaspara cada fuente. 1. Seleccione el menú de ajustes detallados. 2. Seleccione el modo deseado. (Vea la siguiente sección, “Funciones del menú de ajustes ...
Page 63 - Funciones del menú de ajustes detallados
Funciones del menú de ajustes detallados En la siguiente tabla se muestran las funciones para cada fuente en el menú de ajustesdetallados. En la tabla también se muestran las indicaciones para cada función, opera-ciones y botones usados para realizar las operaciones. Para más detalles, o cuando dese...
Page 64 - Operación del sintonizador
15 Operación del sintonizador Sintonización de búsqueda local (LOCAL) Cuando el modo local está activado, se puede seleccionar solamente emisoras de señalesfuertes. FM : LOCAL 1 Ô LOCAL 2 Ô LOCAL 3 Ô LOCAL 4 MW/LW : LOCAL 1 Ô LOCAL 2 Nota: • El ajuste LOCAL 4 permite la recepción solamente de las em...
Page 65 - Uso de las funciones RDS; Visualización del nombre de servicio de programa; cambie la visualización.; Información PTY; Frecuencia
Uso de las funciones RDS ¿Qué es RDS? RDS (Radio Data System) es un sistema para transmisión de dados con los programas deFM. Esos datos, que son inaudibles, proveen una variedad de funciones tales como: nom-bre de servicio de programa, indicación de tipo de programa, espera por anuncio de tráfico,s...
Page 66 - Activación/desactivación de la función AF; Presione el botón FUNCTION y seleccione el modo AF (AF) en el menú de
17 Uso de las funciones RDS Función AF (AF) La función AF (Alternative Frequencies search) se usa para buscar otras frecuencias en lamisma red de la emisora sintonizada actualmente. La función sintoniza de nuevo el recep-tor automáticamente a una otra frecuencia en la red con señales más fuertes, cu...
Page 67 - Función de búsqueda PI; Búsqueda PI; Activación/desactivación de la función REG; Active o desactive la función REG mientras esté en una banda FM.
Función de búsqueda PI El sintonizador busca por una otra frecuencia transmitiendo el mismo programa. “PISEEK” (búsqueda PI) aparece en el visualizador y el volumen de la radio se enmudecedurante la búsqueda PI. El enmudecimiento cesa después de completada la búsqueda PI,tenga la búsqueda PI sido ex...
Page 68 - Activación/desactivación de la función TA
19 Uso de las funciones RDS Función TA (TA) La función TA (espera por anuncio de tráfico) le permite recibir anuncios de tráficoautomáticamente, independientemente de la fuente que esté escuchando. La función TA sepuede activar para una emisora TP (una emisora que transmite información de tráfico) o...
Page 69 - Cancelación de anuncios de tráfico; cancelar el anuncio y volver a la fuente original.; Ajuste del volumen de la función TA; • Ajuste el volumen durante la recepción de un anuncio de tráfico.; Función de alarma TP; * Tiempo requerido para que la búsqueda comience.
Cancelación de anuncios de tráfico • Presione el botón TA/NEWS mientras recibe un anuncio de tráfico para cancelar el anuncio y volver a la fuente original. El anuncio se cancela pero el sintonizador permanece en el modo TA hasta que se presioneel botón TA/NEWS nuevamente. Ajuste del volumen de la f...
Page 70 - Función PTY; Búsqueda PTY; Seleccione el modo de ajuste de búsqueda PTY.
21 Uso de las funciones RDS Función PTY Con la clasificación de ancho y estrecho del tipo de programa, la función PTY proporcionados maneras para seleccionar las emisoras por el tipo de programa que se está emitiendo(PTY Search). La función también provee la sintonización automática a radiodifusione...
Page 71 - Ajuste de interrupción de programa de noticias; • Ajuste la interrupción a activado o desactivado.; Alarma PTY; para cancelar el anuncio y volver a la fuente anterior.
Ajuste de interrupción de programa de noticias La recepción automática de los programas de noticias con código PTY puede ser activadao desactivada. Cuando un programa de noticias recibido termina, la recepción del programa precedente continúa. • Ajuste la interrupción a activado o desactivado. Alarm...
Page 72 - Lista de PTY; Ancho
23 Uso de las funciones RDS Lista de PTY Ancho Estrecho Detalles NEWS/INF NEWS Noticias. AFFAIRS Temas de actualidad. INFO Información general y consejos. SPORT Programas deportivos. WEATHER Informes del tiempo/Información meteorológica. FINANCE Informes del mercado de valores, comercio,operaciones ...
Page 73 - Uso del reproductor de CD incorporado; ción aleatoria con los botones
Uso del reproductor de CD incorporado 24 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Reproducción de repetición (REPEAT) La reproducción con repetición reproduce la misma pista repetidamente. Nota: • Si se realiza la búsqueda de pista o avance rápido/retroceso, la reproducción de repetición...
Page 74 - Active o desactive la pausa con
25 Uso del reproductor de CD incorporado Reproducción con exploración (T-SCAN) La reproducción con exploración reproduce en sucesión los primeros 10 segundos más omenos de cada pista de un CD. Nota: • La reproducción con exploración se cancela automáticamente después que todas las pistas en un disco...
Page 75 - Uso de reproductores de Multi-CD; Visualización; Active o desactive la reprodución; Presione el botón FUNCTION y seleccione el modo de selección de
Uso de reproductores de Multi-CD Reproducción de repetición (REPEAT) Existen tres gamas de reproducción con repetición: Repetición de una pista, repetición dedisco y repetición de reproductor de Multi-CD. La gama de reproducción con repetición esla repetición de reproductor de Multi-CD. Nota: • Si s...
Page 78 - Borrado de una pista programada
29 Uso de reproductores de Multi-CD Borrado de una pista programada Borrado de un disco programado 3. Borre el disco programado con el botón ∞ . 2. Seleccione el modo de programación ITS (ITS) en el menú de ajustes detallados. (Vea la página 13.) 1. Seleccione el disco que desea borrar mientras se r...
Page 79 - Al completar el ingreso del
Título de disco Ingreso de título de disco (TITLE IN) Esta función le permite ingresar hasta un máximo de 100 títulos de disco compuestos dehasta 10 letras. Además, esta función le permite fácilmente buscar y seleccionar un discodeseado para reproducción. (Se pueden almacenar datos de programa ITS y...
Page 80 - Visualización del título del disco; • Cambie la visualización del; Reproduzca el disco
31 Uso de reproductores de Multi-CD Selección de discos mediante la lista de títulos de disco (TITLE LIST) Para reproducir un disco para el cual ha ingresado el título en un reproductor Multi-CD yun disco CD TEXT en un reproductor Multi-CD compatible con CD TEXT, sigas los procedimientos siguientes....
Page 81 - Función CD TEXT (para el tipo compatible con CD TEXT); Cambio de visualización del título; • Seleccione la visualización del
Compresión y DBE (COMP/DBE) El uso de las funciones COMP (Compression) y DBE (Dynamic Bass Emphasis) le permite ajustar la calidad sonora del reproductor de Multi-CD. Ambas las funciones le permiten ajustar en dos niveles. Conmutación COMP/DBE ON/OFF Nota: • Se pueden utilizar estas funciones con re...
Page 82 - Desplazamiento de la visualización del título; Reproducción de discos en un reproductor de Multi-CD de 50 discos; Búsqueda aproximada de número de disco; • Desplace de la visualización del
33 Uso de reproductores de Multi-CD Desplazamiento de la visualización del título Este producto visualiza solamente las primeras 10 letras del título del disco, nombre deartista y título de pista. Con textos con más de 10 letras, puede ver el resto del textodesplazando la visualización. Reproducción...
Page 83 - Ajuste de audio; Selección de la curva del ecualizador; Seleccione el modo deseado en el menú de audio.
Ajuste de audio Selección de la curva del ecualizador Se puede cambiar entre las curvas del ecualizador. • Mueva el botón EQ hacia arriba o abajo para seleccionar la curva del ecualizador deseada. POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = EQ FLAT + = SUPER BASS Nota: • “CUSTOM” almacena una curv...
Page 84 - Funciones del menú de audio
35 Ajuste de audio Funciones del menú de audio El menú de audio provee las siguientes funciones. Ajuste del equilibrio (FADER) Esta función le permite seleccionar un ajuste de potenciómetro/equilibrio que proporcionalas condiciones de audición ideales para todos los presentes. 1. Presione el botón A...
Page 86 - Ajuste fino de la curva del ecualizador; ajuste fino de la curva del ecualizador.
37 Ajuste de audio Ajuste fino de la curva del ecualizador Se puede ajustar la frecuencia central y el factor Q (características de curva) de cada bandade curva seleccionada actualmente (EQ-LOW/MID/HIGH). Los ajustes de la curva delecualizador se almacenan en “CUSTOM”. 1. Presione el botón AUDIO dur...
Page 87 - Función de mejorador de imagen delantera (FIE)
Ajuste de sonoridad (LOUD) La función de sonoridad compensa las deficiencias en las gamas de sonido altas y bajas envolúmenes bajos. Se puede seleccionar un nivel de sonoridad deseado. 1. Presione el botón AUDIO y seleccione el modo de sonoridad (LOUD) en el menú de audio. Función de mejorador de im...
Page 88 - Compare el volumen de FM con el volumen de la otra fuente.; CD; Aumente o disminuya el nivel con
39 Ajuste de audio Ajuste del nivel de la fuente (SLA) La función SLA (Source Level Adjustment) evita saltos radicales en el volumen cuando secambia entre las fuentes. Los ajustes se basan en el volumen de FM, que permanece inal-terado. (Como el volumen de FM es el control, la función SLA no es posi...
Page 89 - Extracción y colocación del panel delantero; Protección contra robo; Extracción del panel delantero; • Vuelva a colocar el panel
Extracción y colocación del panel delantero Protección contra robo El panel delantero de la unidad principal es extraíble como una medida antirrobo. Extracción del panel delantero Colocación del panel delantero Precaución: • Nunca fuerce ni tampoco agarre el visualizador con mucha fuerza al extraer ...
Page 90 - Ajustes iniciales; Selección del menú de ajustes iniciales; Seleccione el menú de ajustes iniciales.
Ajustes iniciales Selección del menú de ajustes iniciales Con este menú se pueden realizar los ajustes iniciales para este producto. 1. Desactive las fuentes. 2. Seleccione el menú de ajustes iniciales. 3. Seleccione el modo deseado. 4. Opere un modo. 5. Cancele el menú de ajustes iniciales. Nota: •...
Page 91 - Funciones del menú de ajustes iniciales; Cambio del paso de sintonía de FM (FM STEP)
Funciones del menú de ajustes iniciales El menú de ajustes iniciales provee las siguientes funciones. Cambio del paso de sintonía de FM (FM STEP) Normalmente ajustado en 50 kHz durante la sintonización por búsqueda en el modo FM, elintervalo de afinación cambia a 100 kHz cuando se activa el modo AF ...
Page 92 - nación deseado con los botones
Ajustes iniciales Conmutación del modo AUX (AUX) Es posible usar un equipo auxiliar (AUX) con este producto.Active el modo AUX cuando utilice un equipo externo con este producto. Selección del color de iluminación (ILL. CLR) Este producto se equipa con dos colores de iluminación, verde y rojo. Puede...
Page 93 - Otras funciones; Ajuste del botón PGM; Seleccione la función que desea memorizar en el botón PGM.
Otras funciones Uso del botón PGM (PGM-FUNC) El botón PGM puede memorizar una de las funciones del menú de funciones.Es posible memorizar una función diferente para cada fuente.Las operaciones del botón PGM solamente son posibles con el control remoto. Algunasunidades de control remoto, tales como e...
Page 94 - Uso del botón PGM; • Utilice el botón PGM.
Otras funciones Uso del botón PGM El botón PGM funciona de manera diferente dependiendo de la función programada(memorizada). • Utilice el botón PGM. 7 Sintonizador Nombre de la función (Visualización) Presione Sostenga durante 2 segundos Memoria de las mejores emisoras (BSM) Desactive Active Sinton...
Page 95 - Uso de la fuente AUX; Selección de la fuente AUX; menú de ajustes detallados.; Enmudecimiento de teléfono celular
Uso de la fuente AUX Es posible usar un equipo auxiliar (AUX) con este producto.Para escuchar al equipo auxiliar, active el modo AUX en el menú de ajustes iniciales, yseguidamente seleccione la fuente deseada. Selección de la fuente AUX • Seleccione AUX. (Vea la página 6.) Ingreso de título para la ...
Page 96 - Mensaje; Reproductor de CD y cuidado
Precaución • Reproduzca solamente discos CD que lleven la marca Compact Disc Digital Audio. • Este producto ha sido concebido para uso solamente con discos compactos convencionales, totalmentecirculares. El uso de discos compactos con otras formas no se recomienda para este producto. • Compruebe tod...
Page 97 - Especificaciones
Especificaciones 48 ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS General Fuente de alimentación .................................... 14,4 V CC (10,8 – 15,1 V permisible) Sistema de conexión a tierra ........................ Tipo negativoConsumo de energía máximo ................................
Page 100 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC.P.O. Box 1760, Long Beach, California 90801, U.S.A.TEL: (800) 421-1404 PIONEER ELECTRONIC (EUROPE) N.V.Haven 1087 Keetberglaan 1, 9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS AUST...