Phoenix Gold TI1600.5 - Manual
Phoenix Gold TI1600.5 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications
- Page 3 – Crossover Settings; SUB CHANNEL
- Page 6 – System tuning
- Page 7 – TROUBLESHO OTING; POWER BUT PROTECT LED IS ON:
Amplifier Manual
Features:
Model: Ti1600.5
© 2011 Phoenix Gold • www.phoenixgold.com
• Uncompromised Five Channel Performance in a Single Chassis
• High, Band and Low Pass Crossovers
• Crossovers feature 41 Detents for Exact Frequency Selection
• Audiophile Bi-Polar Output Transistors (Front and Rear Channels)
• High Efficiency Class D Topology (Subwoofer Channel)
• Massive Dual Unregulated Power Supplies featuring Hand Wound Transformers
• Extruded Aluminum Heatsink with Evenflow Technology
• Dual Fan Cooling System
• Power Output Peak Indicators
• 1/0 Gauge Direct Insert Power Terminals
• Panel Mounted RCAs
• LPL44 - Low Pass Level Control Ready
• RMD - Remote Monitoring Display Port
• Advanced Thermal and Protection Circuitry
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Amplifier Owner’s Manual © 2011 Phoenix Gold • www.phoenixgold.com SUBWOOFER CHANNEL SPECIFICATIONS Frequency Response: ± 1dB from 20Hz to 300Hz Signal to Noise Ratio: >90dB Subsonic and Low Pass Crossovers: 24dB per octave Low Pass Crossover Range: 30Hz to 300Hz Subsonic Crossover Range: 10Hz to...
© 2011 Phoenix Gold • www.phoenixgold.com Amplifier Owner’s Manual SUBWOOFER CHANNEL SPECIFICATIONS Frequency Response: ± 1dB from 20Hz to 300Hz Signal to Noise Ratio: >90dB Subsonic and Low Pass Crossovers: 24dB per octave Low Pass Crossover Range: 30Hz to 300Hz Subsonic Crossover Range: 10Hz to...
Amplifier Owner’s Manual © 2011 Phoenix Gold • www.phoenixgold.com System tuning 1. Install all system fuses. 2. Set the amplifier’s input sensitivity controls to their minimum positions (full counterclockwise). 3. Set all amplifier crossover switches according to your system’s design. 4. Make preli...
