Phoenix Gold pm950 - Manual
Phoenix Gold pm950 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – sult your Carver Professional Dealer before installing the unit.; Important Paperwork
- Page 4 – ohms; Sequence Receive Terminal:
- Page 6 – 75 watts per channel; into 4 ohms; for rated; for 1W into
- Page 8 – Controls And Functions
- Page 10 – Input Sensitivity; for rated output. The input sensitivity can; manual for more information.; Figure 3A; Installation; Mechanical Considerations
- Page 12 – Parallel Mono
- Page 14 – Operating Tips; tape or sticky-dots attached to the amplifier’s panel.; Accessory Options; with a series of DIP switches on the module.; Sequencing ON
- Page 16 – Figure 9; The XLR input connectors on the pm700; In Case of Difficulty; pm950 power is switched off.; Figure 8; Servicing Instructions; The input sensitivity of the amplifier is set at the factory to 1.5V; for rated output. To increase the sensitivity by 6dB to
- Page 18 – Warranty Information; Professional Power Amplifiers: 5 years; the other wire in the cable.; Care and Service; C a re: Wipe off the pm700; Carver Professional; Service Department
- Page 20 – DECLARATION OF CONFORMITY; Year; DAY; Performance; P r o f e s s i o n a l S t e r e o P o w e r A m p l i f i e r
DECLARATION OF CONFORMITY
CARVER PROFESSIONAL INTERNATIONAL
(supplier ’s name)
9300 N. DECATUR, PORTLAND, OR 97203 USA
(address)
declare under our sole responsibility that the product
pm700/950
(name, type or model, lot, batch or serial number, possibly sources and numbers of items)
to which this declaration relates is in conformity with the following standard(s) or
other normative document(s)
EN55013, EN55020, EN60065
(title and /or number and date if issue of the standard(s) or other normative document(s)
(if applicable) following the provisions of
89/336/73/23 EEC
Directive
PORTLAND,OR USA April 25, 1997
(Place and date of issue)
(name and signature or equivalent
marking of authorized person)
A Division Of Phoenix Gold International, Inc.
Part #8100.0093 Rev. A
5
Year
Warranty
18 0
DAY
Performance
Guarantee
Made In America
We
P r o f e s s i o n a l S t e r e o P o w e r A m p l i f i e r
9300 North Decatur
●
Portland OR 97203
●
Tel: 503.288.2008
●
Fax: 503.978.3302
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction Congratulations on your purchase of a new Carver Professional Power Amplifier. It is backed by state-of-the-art engineering and manufacturing techniques to bring you the best in quality craftsmanship and reliable performance. The pm700 and pm950 are specially designed for pro sound appl...
pm700 • 225W per channel into 8 ohms350W per channel into 4 ohms700W mono into 8 ohms • XLR and 1/4” TRS input connectors • Accepts balanced or unbalanced lines • Multi-way Binding Post output connectors • Independent 11 detent level controls for CH1 and CH2 • External Level Control Defeat Switch • ...
Power Output: (20 Hz to 20kHz, withno more than 0.1%)325 watts per channelinto 8 ohms 475 watts per channel into 4 ohms Bridged Mono: 950 watts into 8 ohmsat 1kHz, with no morethan 0.1% THD Dynamic Headroom: >2.0 dB Frequency Response: 20Hz to 20kHz(±0.75dB) Channel Separation: >65 dB @ 1kHz D...
