Philips X5004/84 - User Manual

X5004, X5006

NOT INCLUDED

1

2

1

2

1

2

NOT INCLUDED

1

2

3

3

sec

>75 % recycled paper

>75 % papier recyclé

Manufactured for:

Philips Personal Health

a division of Philips North America LLC

P.O. Box 10313, Stamford, CT 06904

This symbol on the product’s

nameplate means it is listed by

Underwriters’ Laboratories, Inc.

Norelco and Tripleheader are registered

trademarks of Philips North America LLC.

PHILIPS and Philips shield are registered

trademarks of Koninklijke Philips N.V.

©2022 Philips North America LLC. All rights

reserved.

300008489771 (06/15/2022)

2

14

8

20

5

17

11

23

26

29

32

35

36

3

15

9

21

6

18

12

24

27

30

33

4

16

10

22

7

19

13

25

28

31

34

English

IMPORTANT

SAFETY

INSTRUCTIONS

When using an electric product, basic

precautions should always be followed,

including the following:

Read all instructions before using this

product.

DANGER

To reduce the risk of electric shock:

-

To charge the product, only use a USB

power source on a certified product

with output rating 5 V, ≥ 1 A. For safe

charging in a moist environment (e.g. in

a bathroom), only use an IPX4 (splash-

proof) power source. A suitable power

source (e.g. Philips HQ87) is available

via www.philips.com/support. If you

need support finding the correct USB

power source, contact Philips support at

1-800-243-3050. Using a non-certified USB

power source may cause hazards or serious

injuries.

-

Keep the USB cable and the USB power

source dry (Fig. 2).

Do not reach for a corded product that has

fallen into water. Unplug immediately from

the power outlet.

-

Do not place or store the product where it

can fall or be pulled into a tub or sink. Do

not place or drop the product into water or

other liquid.

-

This product does not work while it is

connected to the power outlet. Except

when charging, always unplug this product

from the power outlet.

-

Remove USB power source from power

outlet and product before cleaning.

WARNING

To reduce the risk of burns, fire, electric

shock, or injury to persons:

-

This product is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the product

by a person responsible for their safety.

Children should be supervised to ensure

that they do not play with the product.

-

Use this product only for its intended

household use as described in this manual.

Misuse can lead to hazards or serious

injuries. Do not use attachments not

recommended by Philips North America

LLC. Accessories supplied may vary for

different products.

-

Never operate this product if it has a

damaged USB power source, if it is not

working properly, after it has been dropped

or damaged, or after the product or the

USB power source has been dropped into

water. For assistance call 1-800-243-3050.

-

Keep the USB cable and the USB power

source away from heated surfaces.

-

Never drop or insert any object into any

opening.

-

Do not use the USB power source in or near

a power outlet that contains an electric air

freshener to prevent damage to the USB

power source.

-

Do not use product outdoors or operate

where aerosol (spray) products are

being used or where oxygen is being

administered.

-

Always check shaving heads (guards and

cutters) before using the product. Do not

use the product if cutters or guards are

damaged, as injury may occur.

-

Always attach the USB cable to the USB

power source and the product first, then

attach the USB power source to the power

outlet. To disconnect, set all controls to

‘off’ position. Then remove the USB power

source from the power outlet.

-

Plug USB power source directly into power

outlet. Do not use an extension cord.

-

Unplug USB power source before plugging

in or unplugging the product.

-

Only use original Philips accessories or

consumables.

-

Charge, use and store the product at a

temperature between 41 °F / 5 °C and

95 °F / 35 °C.

-

Keep product and batteries away from fire

and do not expose them to direct sunlight

or high temperatures.

-

If the product becomes abnormally hot or

smelly, changes color or if charging takes

longer than usual, stop using and charging

the product and contact Philips.

-

Do not place products and their batteries in

microwave ovens or on induction cookers.

-

Do not open, modify, pierce, damage or

dismantle the product or battery to prevent

batteries from heating up or releasing

toxic or hazardous substances. Do not

short-circuit, overcharge or reverse charge

batteries.

-

If batteries are damaged or leaking, avoid

contact with the skin or eyes. If this occurs,

immediately rinse well with water and seek

medical care.

-

When you handle batteries, make sure that

your hands, the product and the batteries

are dry.

-

To avoid accidental short-circuiting of

batteries after removal, do not let battery

terminals come into contact with metal

objects (e.g. coins, hairpins, rings). Do not

wrap batteries in aluminum foil. Tape

battery terminals or put batteries in a

plastic bag before you discard them.

SAVE THESE

INSTRUCTIONS

Important

-

This product is waterproof (Fig. 3). It is

suitable for use in the bath or shower

and for cleaning under the tap. For safety

reasons, the product can therefore only be

used without cord.

-

Because of hygiene, only one person should

use the product.

-

Do not use a damaged appliance. Replace

damaged parts with new Philips parts.

-

Before cleaning and storing the product,

switch off the product and disconnect it

from the USB cable.

-

Clean the product and the attachments

after each use for optimal performance.

-

Never use compressed air, scouring pads,

abrasive cleaning agents or aggressive

liquids to clean the appliance.

-

Let the product and its attachments dry

completely before storing.

-

Do not wrap cord around the product

when storing.

-

Store cord and other accessories in a safe

location where these will not be cut or

damaged.

General description

1 Protective cap

2 Shaving unit

3 Shaving unit release button

4 Shaving unit connector

5 Power-on light ring

6 On/off button

7 Battery charge indicator

8 Socket for small plug

9 Trimmer

10 USB cable

Note: A suitable power source

(e.g. Philips HQ87) is available via

www.philips.com/support.

Introduction

Congratulations on your purchase and

welcome to Philips Norelco! To fully benefit

from the support that Philips offers, register

your product at

www.philips.com/welcome

.

Charging

Danger: Keep the USB cable and the USB

power source dry (Fig. 2).

Fully charge the product before first use and

when the display indicates that the battery is

almost empty.
Charging takes approx. 1 hour. A fully charged

shaver provides up to 50 minutes of shaving

time.

1

2

3
4

6

7

8

5

9

10

1

1 Make sure that the product is switched off.
2 Insert the small plug of the USB cable into

the socket in the bottom of the product.

3 Insert the USB plug into the USB power

source (not included) (Fig. 4).

4 Insert the USB power source into the power

outlet (Fig. 5).
The battery indicator starts to flash white

(Fig. 6).

5 After charging, remove the power source

from the power outlet, pull the USB plug

out of the power source and then pull the

small plug out of the product (Fig. 7).

Charge indications

Battery low

When the battery is almost empty, the battery

charge indicator flashes orange (Fig. 6).

Battery charging

While the product charges, the battery charge

indicator continues to flash white (Fig. 8).

Battery full

When the product is fully charged, the battery

charge indicator lights up white continuously.

After approx. 30 minutes, the lights go out

automatically.
Note: This product can only be used without

cord (Fig. 9).

‘Unplug before use’ reminder

The battery charge indicator flashes white to

remind you to unplug the shaver first.

Using the product

Always check the product and all

accessories before using. Do not use the

product or any accessory if it is damaged,

as this may cause injury. Always replace

a damaged part with one of the original

type.

Note: This product can only be used without

cord.

Removing or attaching the click-on

attachments

1 Make sure the product is switched off.
2 To attach the click-on attachment, insert

the lug of the attachment into the slot in

the top of the product. Then press down

the attachment to attach it to the product

(‘click’) (Fig. 10).

3 To remove the click-on attachment, twist

the attachment and then pull it off the

product (Fig. 11).

Shaving

You can use this product either wet or dry, or

even in the shower.
For a wet shave, apply some water and

shaving foam or gel to your skin and rinse the

shaving heads under the tap with warm water

before following the steps below.
1 Press the on/off button once to switch on

the product (Fig. 12).

2 Move the shaving heads over your skin in

circular movements (Fig. 13) to catch all

hairs growing in different directions. Make

sure each shaving head is fully in contact

with the skin. Exert gentle pressure for a

close, comfortable shave.
Note: Do not press too hard, as this can

cause skin irritation.
Note: If you are shaving with gel or foam,

rinse the shaving unit regularly during your

shave to ensure that it continues to glide

smoothly over your skin (Fig. 14).

3 Use the narrow sides of the shaving unit to

shave in hard-to-reach areas such as along

your jawline and under your nose (Fig. 15).

4 Switch off and clean the product after each

use (see ‘Cleaning and maintenance’).
Note: Make sure you rinse all foam or

shaving gel off the product.

21-Day adaptation process

-

21 Day Trial and Conversion Process. It is a

fact that your skin and beard need time to

adjust to a new grooming system.

-

Use your new shaver exclusively for 3 weeks

to fully enjoy the closeness of a Philips

Norelco shave.

-

At first you may not get as close a shave as

you expect, or your face may even become

slightly irritated. This is normal since your

beard and skin will need time to adjust.

Invest 3 weeks and you’ll soon experience

the full joy of your new shaver.

-

Stick with it! If you alternate shaving

methods during the adjustment period, it

may make it more difficult to adapt to the

Philips Norelco shaving system.

-

If you are still not convinced after 21 days,

Philips Norelco will refund you the full

purchase price as long as the request is

received within 45 days of purchase.

Trimming

1 Press the on/off button once to switch on

the product (Fig. 12).

2 Hold the trimmer perpendicular to the skin

and move it downwards while exerting

gentle pressure.

3 You can also use the trimmer to contour

your beard (Fig. 16) and sideburns (Fig. 17).

4 Switch off the product and clean the

trimmer after each use to prevent clogging

and damage. Switch off the product and

clean the trimmer after each use to prevent

clogging and damage.

Cleaning and maintenance

Clean the product and the attachments after

each use for optimal performance.

Cleaning the shaver under the tap

Clean the shaver after every shave for optimal

performance.

Always check if the water is too hot, to

prevent burning your hands.
Never dry the shaving unit with a towel

or tissue, as this may damage the shaving

heads.
While rinsing shaving heads, water may

drip out of the base of shaver. This is a

normal occurrence.

1 Press the on/off button once to switch on

the product (Fig. 12).

2 Rinse the shaving unit with cold or

lukewarm water (Fig. 14).

3 Press the on/off button to switch off the

product. Press the release button to open

the shaving unit (Fig. 18).

4 Rinse the hair chamber under a warm tap

(Fig. 19).

5 Rinse the shaving head holder under the

tap (Fig. 20).

6 Carefully shake off excess water and let

the shaving head holder air-dry completely

(Fig. 21).

7 Close the shaving unit (Fig. 22).

Thorough cleaning

We advise you to clean the shaving heads

thoroughly once a month or when the shaver

does not shave as well as it used to.
1 Make sure that the product is disconnected

from the USB cable.

2 Press the on/off button once to switch off

the product (Fig. 12).

3 Press the release button on the shaving unit

(Fig. 18) and pull the shaving head holder

off the shaving unit (Fig. 23).

4 Turn the retaining rings counterclockwise

and remove them (Fig. 24).

5 Remove the shaving heads from the

shaving head holder. Each shaving head

consists of a cutter and guard (Fig. 25).
Note: Do not clean more than one cutter

and guard at a time, since they are all

matching sets. If you accidentally put a

cutter in the wrong shaving guard, it may

take several weeks before optimal shaving

performance is restored.

6 Clean the cutter and guard under the tap

(Fig. 26).

7 Put the cutter back into the guard (Fig. 27).
8 Place the shaving heads in the shaving head

holder (Fig. 28).
Note: Make sure that the projections of the

shaving heads fit exactly into the recesses

of the shaving head holder.

9 Place the retaining rings back onto the

shaving head holder and turn them

clockwise (‘click’) (Fig. 29).

-

Each retaining ring has two recesses and

two projections that fit exactly in the

projections and recesses of the shaving

head holder.

10 Reinsert the hinge of the shaving head

holder into the slot of the shaving unit

(Fig. 30). Close the shaving unit (Fig. 22).

Cleaning the click-on trimmer

Never dry the trimmer with a towel or

tissue, as this may damage the trimming

teeth.

Clean the trimmer after each use.
1 Press the on/off button once to switch on

the product (Fig. 12).

2 Rinse the trimmer with cold or lukewarm

water (Fig. 31).

3 After cleaning, press the on/button to

switch off the product.

4 Carefully shake off excess water and let the

trimmer air-dry completely (Fig. 32).

5 For optimal performance, lubricate the

teeth of the trimmer with a drop of mineral

oil every six months.

Storage and travel

Put the protection cap on the product (Fig. 33)

to protect it from dirt accumulation. We advise

you to let the product dry before you store it.

Travel lock

You can lock the shaver when you are going

to travel to prevent it from switching on

accidentally.
To activate or deactivate the travel lock,

press the on/off button for 3 seconds. When

the travel lock is activated or deactivated,

the power-on light ring flashes three times

(Fig. 34).
Note: The product unlocks automatically when

connected to a power outlet.

Replacement

For maximum shaving performance, replace

the shaving heads once a year (Fig. 35).
Replacement parts and accessories may

be purchased at a store near you or on our

website

www.philips.com/store.

The following accessories and spare parts are

available:

-

SH30 Philips Norelco replacement shaving

heads

Assistance

For assistance, visit our website:

www.philips.com/support

or call toll free

1-800-243-3050.

Disposal

-

This product contains a rechargeable

lithium-ion battery which must be disposed

of properly.

-

Contact your local town or city officials

for battery disposal information. You

can also call 1-800-822-8837 or visit

www.call2recycle.org

for battery drop-off

locations (Fig. 36).

-

For assistance, visit our website

www.philips.com/support

or call

1-800-243-3050 toll free.

-

Your product is designed and

manufactured with high quality

materials and components, which can

be recycled and reused. For recycling

information, please contact your local

waste management facilities or visit

www.recycle.philips.com

.

Full Two-Year Warranty

Philips North America LLC warrants this

new product (except shaving heads) against

defects in materials or workmanship for a
period of two years from the date of purchase,

and agrees to repair or replace any defective

product without charge.

IMPORTANT

: This warranty does not cover

damage resulting from accident, misuse or

abuse, lack of reasonable care, the affixing of

any attachment not provided with the product

or loss of parts or subjecting the product to

any but the specified voltage or batteries.*

NO RESPONSIBILITY IS ASSUMED FOR ANY

SPECIAL, INCIDENTAL OR CONSEQUENTIAL

DAMAGES.

In order to obtain warranty service, simply go

to

www.philips.com/support

. It is suggested

that for your protection you return shipments

of product by insured mail, insurance prepaid.

Damage occurring during shipment is not

covered by this warranty.

NOTE: No other warranty, written or oral, is

authorized by Philips North America LLC.
This warranty gives you specific legal rights,

and you may also have other rights which

vary from state to state. Some states do not

allow the exclusion or limitation of incidental

or consequential damages, so the above

exclusion and limitations may not apply to

you.
*Read enclosed instructions carefully.

45-DAY MONEY-BACK GUARANTEE

To enjoy the closest and most comfortable

shave from your new Philips Norelco Men’s

Shaver, the shaver should be used exclusively

for 3 weeks. This allows your hair and skin

enough time to adapt to the Philips Norelco

Shaving System. If, after that period of time,

you are not fully satisfied with your Philips

Norelco Men’s Shaver, send the product

back along with dated sales receipt and we’ll

refund you the full purchase price.

The product must be shipped prepaid by

insured mail, insurance prepaid, have the

original sales receipt, indicating purchase

price and date of purchase, and the money-

back guarantee return authorization form

enclosed.
We cannot be responsible for lost mail.

The product must be postmarked no later

than 45 days after the date of purchase. Philips

reserves the right to verify the purchase price

of the product and limit refunds not to exceed

suggested retail price.

To obtain money-back guarantee service,

please go to www.PhilipsMoneyBack.com.
Delivery of refund check will occur

6–8 weeks after receipt of returned

product.

X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8

X500x_ZETA-X-US_300008489771_IID-LFLT_foldedA7_BW.indd 1-8

05-07-22 14:46

05-07-22 14:46