Philips TYPE VR 175 Manual - Free PDF Download

Page 2 - Programming with ’VIDEOPlus+’; How to programme a recording manually

& Programming with ’VIDEOPlus+’ All the information required for a programming is contained encoded in the VIDEOPlus+ code. 1 Switch on the TV set. 2 Press the TIMER k button on the remote control. 3 Please enter the VIDEOPlus+ -code (up to 9 digits) printed in your TV guide next to the start ti...

Page 3 - Congratulations; Safety instructions and other notes; Contents; INSTALLATION; OPERATING INSTRUCTIONS PHILIPS VR 175

1 Congratulations on the purchase of one of the most sophisti- cated and simple-to-use video recorders (VCR) on the market.With this VCR you can record and play VHS-standardcassettes. Please take the time to read this operating manual beforeusing your video recorder. Safety instructions and other no...

Page 4 - Important for the United Kingdom; How to connect a plug:; Connecting cables; do not read further here; Important notes for operation; automatically

2 Important for the United Kingdom This apparatus is fitted with an approved moulded 13 Ampplug. To change a fuse in this type of plug proceed asfollows: • Remove fuse cover and fuse. • Fix new fuse which should be a BS1362 3A, A.S.T.A.or BSI approved type. • Refit the fuse cover. If the fitted plug...

Page 5 - User guide

3 Connecting additional equipment You can also connect additional equipment to the EXT.1 socket, for instance, satellite receiver, decoder or camcorder. Note: You can find information about how to connect your TV set in chapter 4, ’SPECIAL FEATURES’ in thesection ’Playback via the aerial cable’. Eme...

Page 6 - Automatic Channel Search; Manual Channel Number Allocation; unwanted

4 Automatic Channel Search 1 Switch on the TV set. Press the AUTOINSTALL button on the video recorder. If TV channels have already beenstored, select and confirm the ’AUTOINSTALL’ line. 2 The ’Automatic Channel Search’ starts. AUTOINSTALL 00 3 Wait until all the TV channels have been found. This may...

Page 7 - PLAYBACK

5 1 Insert the cassette into the cassette slot. 2 Press the playback button PLAY G . 3 Picture scanning: Press the H (reverse) or I (forward) button once or several times. 4 Interrupt: Press the STOP h button. 5 Wind and rewind: Interrupt the playback function and press the H (rewind) or I (wind) bu...

Page 9 - Long play function; Before; Some general notes for recording; Recording from external sources:; How to programme a recording; RECORDING

7 1 Insert a cassette or switch the video recorder on with the P q button. 2 Use the P r or P q button or the 0-9 buttons to select the programme number from which you wish torecord, e.g. ’P 01’ . P 01 3 Press the RECORD 5 button. 0:00 4 To stop recording, press the STOP h button. Long play function...

Page 10 - Programming recordings manually

8 Programming with ’VIDEOPlus+’ All the information required for a programming is containedencoded in the VIDEOPlus+ code. 1 Switch on the TV set. 2 Press the TIMER k button on the remote control. 3 Please enter the VIDEOPlus+ code (up to 9 digits) printedin your TV guide next to the start time of a...

Page 11 - Important programming notes; at the time

9 Important programming notes • When recordings have been programmed, k appears in the display. • The programmed recording will always be made at therecording speed (SP/LP) that at the time has been selected on the video recorder. • You cannot operate the video recorder manually while aprogrammed re...

Page 12 - SPECIAL FEATURES

10 Tuner mode You can also use your video recorder as a TV receiver(tuner). 1 Hold the STOP h button, until + appears in the display. 2 Choose the required programme number with the P r or P q button or with the 0-9 buttons. 3 Switch the video recorder to standby by pressing the STANDBY m button whe...

Page 13 - Manual channel search

11 Manual channel search In certain cases the Automatic Channel Search may not beable to find all of the TV channels (e.g. coded TV channels).You can then use this manual method to set the channels. 1 Switch on the TV set. Press the AUTOINSTALL button on the video recorder. 2 Select and confirm ’MAN...

Page 14 - Playback via the aerial cable

12 Playback via the aerial cable If you do not wish to use a scart cable, the aerial cable which is already connected will act as the connection between your TV set and the video recorder. Ensure that thevideo recorder is connected to the mains supply. 1 Switch on your TV set and select the programm...

Page 15 - Before you call an engineer; Interference

13 Before you call an engineer If, contrary to expectation, you experience any difficulty inoperating this video recorder, it may be caused by one of thereasons mentioned below. You can also call the customer service in your country. You will find the telephone numbers in the enclosed guar-antee lea...