Philips TAH6005BK/10 User Manual

Page 2 - Important safety instructions 2; Hearing Safety; Your Wireless TV headphones 3; Wireless TV headphones; Get started; Start up; Technical data; Contents; Frequently asked questions

1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Wireless TV headphones 3 What's in the box 3 Wireless TV headphones 4 3 Get started 5 Start up 5 Connect 6LED indications 7 4 Technical data 8 Contents 5 Frequently asked questions 9

Page 3 - To avoid damage or malfunction:; Danger

1 Important safety instructions Hearing Safety Be sure to observe the following guidelines when using your headset.• Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high tha...

Page 5 - LED; Charging socket

Overview of your wireless TV headphones Power input 3.5mm plug for headphones charging Audio in (plug with TV) Power on / off LED indicator Channel select switch  LED Auto-tune (after channel select in transmitter) Charging socket  Volume +/-             

Page 6 - Caution

3 Get started Caution  AAA alkaline batteries can be used to operate the headphones, but cannot be charged with this system. Note  Only use Philips rechargeable shortened sleeve NiMH batteries with your headphones. Other types of rechargeable batteries cannot be charged with this system.  Before ...

Page 7 - Connect; Connect the audio device; Power on the headphones; Adjust the input volume

Connect Charging: “Green” flashing;Charging finished: “Green” on. Hi-Fi/TV “White” on 1 Connect the audio device • Connect the audio device with a 3.5 mm audio output. Connect one side of the supplied 3.5 mm audio cable to the 3.5 mm audio input of the Transmitter and another side to the 3.5 mm audi...

Page 8 - LED indications; Tip

Fully charged Green LED on N/A LED indications Tip  The white LED on transmitter turns off after 5 minutes. Status LED on Transmitter LED on headphones Searching Low battery level N/A Green LED flashing Connection established White LED on* N/A Green LED on Green LED flashing slowly Charging Green L...

Page 10 - I cannot hear any sound.

5 Frequently asked questions I cannot hear any sound. • Make sure that you connect the power source and adapter correctly (see ‘1. Connect the audio device’ on page 5). • Make sure that you adjust the volume to an appropriate level. • Make sure that the batteries are charged and inserted properly to...