Philips OR2200 - Manual

4 EN Overview of the product a TIMER • Press and hold to star t setting countdown timer. b • In standby mode, press and hold to star t setting time and date. • In FM or DAB mode, press and hold to access the menus. • When listening to an RDS or DAB station, press repeatedly to display available info...

5 EN Know about the LCD display a The first alarm is activated. b The second alarm is activated. c The clock d Text information e The sleep timer is activated. f The countdown timer is activated. g The current source a c d eg f b

6 EN 3 For the first time use Assemble the AC power adaptor 1 Align the plug conver ter to the holes on the power adaptor. 2 Push the plug conver ter downwards until you hear a "click". Replace a plug converter 1 Press down the clip. 2 Slide the plug conver ter outwards. 3 Pull the plug conv...

8 EN 5 Use the alarm timer Note • Make sure that you have set the clock correctly. Set an alarm You can set two alarms. 1 Press and hold AL1 (or AL2 ) for two seconds. » [Alarm 1] (or [Alarm 2] ) is displayed with AL1 (or AL2 ) blinking. » The current alarm time is displayed with hour digits blinkin...

9 EN 6 Listen to FM radio stations Note • For optimal reception, fully extend the antenna and adjust its position. • You can store a maximum of 20 FM radio stations. Switch to FM mode Press SOURCE repeatedly until [FM Mode] is displayed. » FM is highlighted. » The current frequency is displayed. Sea...

10 EN Display RDS information Radio Data System (RDS) is a ser vice that allows FM stations to transmit additional information. When you tune to an FM radio station that transmits RDS signals, the station name is displayed. 1 Tune to an RDS station. 2 Press repeatedly to scroll through the following...

11 EN 7 Listen to DAB radio stations Note • For optimal reception, fully extend the antenna and adjust its position. • You can program a maximum of 20 DAB radio stations. • Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area. Switch to DAB mode Press...

12 EN Note • If you store a radio station with the sequence number of another one, the earlier one is overwritten. Display DAB information The name of current DAB station is displayed. You can also view the other information. To cycle through available information, press repeatedly. • Dynamic label ...

13 EN Remove invalid stations Some stations in the list have no ser vice when you travel to another area. In front of the station name of an invalid station, a question mark (?) is displayed. 1 Press to access the sub-menus. 2 Press / repeatedly to select an option. • [No] : Return to the previous m...

15 EN 9 Use system menus Use the system menus to • check the version of current software of this product, • upgrade the software, and • reset the product to factor y default status. Check the current software version Press to display the version of current software. Upgrade the software 1 Go to www....

16 EN 10 Adjust volume • To increase the volume, turn the power and volume knob clockwise. • To decrease the volume, turn the power and volume knob anti-clockwise.

19 EN 13 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never tr y to repair the product yourself. If you encounter problems when using this product, check the following points before requesting ser vice. If the problem remains unsolved, go to the Phil...

20 EN 14 Product information Note • Product information is subject to change without prior notice. General information AC power adaptor Model No.: OH- 1015E0591500U1 Brand name: Philips Input: 100-240 V~, 50/60Hz, 350 mA; Output: 5.9 V 1.5 A Operation power consumption 2 W Standby power consumption ...

21 EN 15 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. This is CLASS II apparatus...