Philips HTL2101A/F7 User Manual

Page 3 - Contents

1 EN Contents 1 Important 2 Help and suppor t 2 Impor tant safety instructions 2 Care for your product 4 Care of the environment 4 2 Your SoundBar 4 Main unit 4 Remote control 5 Connectors 5 3 Connect 6 Connect audio from TV and other devices 6 4 Use your SoundBar 7 Adjust the volume 7 Choose your s...

Page 4 - Important; Help and support

2 EN 1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support Philips provides extensive online suppor t. Visit our website at www.philips.com/suppor t to: • download the user ma...

Page 6 - Your SoundBar; Main unit

4 EN Care for your product Use only microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling ce...

Page 7 - Remote control; Connectors

5 EN Remote control This section includes an over view of the remote control. a (Standby-On) Switch the SoundBar on or to standby. b AUX Switch your audio source to the AUX connection. c AUDIO-IN Switch your audio source to audio input connection (3.5mm jack). a b c e f i k j g h d d +/- Increase or...

Page 8 - Connect; Connect audio from TV and

6 EN b AUDIO-IN Audio input from an MP3 player (3.5mm jack). Rear connectors a AUDIO IN-AUX Connect to an analog audio output on the TV or an analog device. b DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. c DIGITAL IN-COAXIAL Connect to a coaxial audio output o...

Page 9 - Use your; Choose your sound

7 EN Option 2: Connect audio through a digital coaxial cable Good quality audio 1 Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT . Option 3: Conne...

Page 10 - MP3 player; Auto standby

8 EN Equalizer Change the high frequency (treble) and low frequency (bass) settings of the SoundBar. 1 Press TREBLE +/- or BASS +/- to change the frequency. • Press RESET to reset your treble/bass level to the default setting mode. » All Source indicators on the main unit blink twice when treble or ...

Page 11 - Wall mount; Product

9 EN 5 Wall mount Note • Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injur y or damage. If you have any quer y, contact Philips Consumer Care in your countr y. • Before wall mounting, make sure the wall can suppor t the weight of ...

Page 12 - Troubleshooting

10 EN • Class suppor t: USB Mass Storage Class (MSC) • File system: FAT16 and FAT32 • Suppor ts MP3 and WMA file formats Main unit • Power supply: 220-240 V~, 50 Hz • Power consumption: 40 W • Standby power consumption: ≤ 0.5 W • Speaker impedance: 8 ohm (full range) • Speaker drivers: 4 x 54.5 mm (...

Page 13 - Notice; Notice of compliance

11 EN 8 Notice This section contains the legal and trademark notices. Notice of compliance The device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference receiv...