Page 2 - Contents
1 EN Contents 1 Safety 2 2 Your car audio system 3 Introduction 3 What's in the box 3 Over view of the system 4 3 Install the car audio system 6 Connect wires 7 Mount into the dashboard 8 Attach the front panel 10 4 Get started 11 For the first time use 11 Set the time format 11 Set the clock 11 Sel...
Page 3 - Safety
2 EN 1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative...
Page 4 - Introduction
3 EN 2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at www.philips.com/welcome. Introduction With this system, you can: • enjoy audio from a USB storage device, SD/SDHC card, iPod/iPhone,...
Page 5 - Overview of the system
4 EN Overview of the system a • Unlock the front panel. b • For .wma and .mp3 tracks on a storage device, press to select the previous folder. • Press and hold to access the system menu. • In DAB mode, press to access the DAB menu. • Press to select a tuner band. a b c d e t s r q p o n m l k j i h ...
Page 7 - Install the car
6 EN q • For .wma and .mp3 tracks on a storage device, press to select the next folder. • In DAB mode, press and hold to access the list of stored stations. • In a mode other than DAB mode, press and hold to activate the selection of listening zones. • Press to select a tuner band. r / • Tune to a r...
Page 8 - Connect wires
7 EN Connect wires Note • Make sure that all loose leads are insulated with electrical tape. • Consult a professional to connect wires as instructed below. 1 Check the car's wiring carefully and connect them to the the supplied ISO male connectors. ISO male connectors Connect to 1 Green strip, black...
Page 9 - Connect the DAB radio receiver; Mount into the dashboard
8 EN Tip • The pin arrangement for the ISO connectors depends on the type of your vehicle. To avoid damage to the unit, connect properly. Connect the DAB radio receiver Note • The DAB radio receiver and DAB radio antenna are not bundled. Consult your local retailer for purchase. • Make sure that no ...
Page 11 - Attach the front panel; Detach the front panel
10 EN Attach the front panel 1 Inser t the notch on the front panel to the chassis on the main unit. 2 Press the left end of the front panel inwards until it is securely locked with a "click". Detach the front panel Note • Before you inser t an SD/SDHC card or reset the system, detach the fr...
Page 12 - Get started; Display the clock; Select a source
11 EN 4 Get started For the first time use 1 Press to turn on the system. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. 2 When one of the following options is displayed, rotate to select a radio region that matches your location. • [AREA EUROPE] (Wester...
Page 13 - MW radio; Switch to FM/MW radio; Select a tuner region
12 EN Select a listening zone 1 Press and hold until one of the following options is displayed. • [ALL] : For all passengers • [FRONT-L] : For the front-left seat only • [FRONT-R] : For the front-right seat only • [FRONT] : For front passengers only 2 Press / repeatedly to select a listening zone. M...
Page 14 - Play with RDS
13 EN Select a tuner sensitivity To search for radio stations with strong signals only or more radio stations, you can change the tuner sensitivity. 1 Press and hold to access the system menu. 2 Press / repeatedly until [LOCAL ON] or [LOCAL OFF] is displayed. 3 Rotate to select a setting. • [LOCAL O...
Page 15 - Select a program type; Use alternate frequencies
14 EN 3 Rotate to select [RDS ON] . » The RDS function is enabled. • To disable the RDS function, rotate to select [RDS OFF] . Select a program type Before tuning to RDS stations, you can select a program type to search for programs of the selected categor y only. 1 Press and hold to access the syst...
Page 16 - Receive traffic announcement; Synchronize the system clock; Listen to DAB; Switch to DAB mode; Scan for on-air stations
15 EN Receive traffic announcement If you want to receive traffic announcement, enable the TA (Traffic Announcement) function. 1 Press and hold to access the system menu. 2 Press / repeatedly until [TA ON] or [TA OFF] is displayed. 3 Rotate to select a setting. • [TA ON] : When a traffic announcemen...
Page 17 - Tune to a detected station; Program radio stations; Program stations automatically; Program stations manually; Display DAB information
16 EN Tune to a detected station 1 Press to exit the system menu. 2 Press again to access the list of detected stations. » is displayed. 3 Press / repeatedly or rotate until the name of the target station is displayed. 4 Press to star t listening. Program radio stations You can assign a sequence num...
Page 18 - DAB firmware
17 EN Set up for weak reception When the current reception gets poor, the product can automatically switch the source or mute the speakers according to your setup. 1 Press and hold to access the system menu. » [DAB SCAN] is displayed. 2 Press / repeatedly until [DAB WEAK] scrolls. 3 Rotate to select...
Page 19 - Control play
18 EN 7 Play from a storage device This system can play .mp3 and .wma files that are copied onto a compatible storage device. Note • Philips does not guarantee compatibility with all storage devices. • NTFS (New Technology File System) file system is not suppor ted. 1 Connect a compatible USB storag...
Page 20 - Switch tracks; Switch tracks directly; Switch folders for a track; Play from an; Compatible iPod/iPhone
19 EN Switch tracks During play, you can switch tracks or folders quickly. Switch tracks directly 1 Press to access the track list. » The file name of current track scrolls. 2 Rotate to toggle through tracks. 3 Press to play the selected track. Switch folders for a track 1 Press to access the folder...
Page 21 - Search for a track; Charge your iPod/iPhone
20 EN 2 Press AS / SOURCE repeatedly to switch the source to [FRONT USB] (Front USB socket) or [REAR USB] (Rear USB connector). » The system star ts playing tracks that are stored on your iPod/iPhone. Note • Before you disconnect the iPod/iPhone, switch the system to another source. Control play But...
Page 22 - Connect a device; Disconnect a device; Reconnect a device
21 EN 9 Use Bluetooth devices With this car audio system, you can listen to audio from a player or make a call through Bluetooth. Connect a device Note • Philips does not guarantee the compatibility with all Bluetooth devices. • Before pairing a device with this system, read its user manual for Blue...
Page 23 - Make a call
22 EN Play audio from a Bluetooth device If the connected Bluetooth device suppor ts Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system. If the device also suppor ts Audio Video Remote Control Profile (AVRCP) profile, you can control...
Page 24 - 1 Adjust sound
23 EN 10 Listen to an external player You can use the system to amplify the audio input from an external player, for example, MP3 player. 1 Press AS / SOURCE repeatedly to switch the source to [AUX IN] . 2 Connect an audio input cable with a 3.5 mm connector on both ends between • the AUDIO-IN socke...
Page 25 - Reset the system; Replace the fuse; Upgrade the firmware; Register your product
24 EN 12 Additional information Reset the system If the system works abnormally, reset the system to factor y default settings. 1 Detach the front panel. 2 Press the RESET button with the tip of a ball-point pen or toothpick. » All settings are reset to factor y default. Replace the fuse If there is...
Page 26 - Perform the upgrade; information
25 EN Perform the upgrade 1 Check the current firmware version of this product. (see 'Check the current version of DAB firmware' on page 1 7) 2 Go to www.philips.com/suppor t. 3 Log in with your account for Club Philips. » Suppor t information about your registered product is displayed. 4 Click the ...
Page 27 - 4 Troubleshooting
26 EN Usable sensitivity - DAB (EN50248) < -95 dbm Bluetooth Output power Class 2 Frequency band 2.4000 GHz - 2.4835 GHz ISM Band Range 3 meters(free space) Standard Bluetooth 2.0 specification 14 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never...
Page 28 - About the Bluetooth device
27 EN Cannot switch the source to iPod/iPhone • Check whether the iPod/iPhone is securely connected. • Check whether the iPod/iPhone is compatible with this system. • Check whether the iPod/iPhone batter y is nearly empty. Connect it to this system for charging first. Cannot switch the source to [DA...
Page 29 - Compliance; Trademark notice
28 EN 15 Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. Care of the envi...
Page 30 - Copyright
29 Copyright 2013 © Koninklijke Philips Electronics N.V. Specifications are subject to change without notice. Trademarks are the proper ty of Koninklijke Philips Electronics N.V or their respective owners. Philips reser ves the right to change products at any time without being obliged to adjust ear...
