Page 2 - NEW ZEALAND; Guarantee and Service for New Zealand; Philips Product Warranty; AUSTRALIA; Philips product warranty for Australia
Philips Authorised Service Centres To contact your nearest Philips Authorised Service Centre call 1300-36-13-92 from anywhere in Australia. Sydney Canberra Adelaide Newcastle Melbourne Hobart Perth Brisbane Wollongong Service is provided through 350 accredited service dealers throughoutAustralia. To...
Page 3 - CONTENTS; English
3 CONTENTS English ....................................................5 Français.................................................31 Español .................................................57 ................................................83 English Français Enspañol
Page 4 - LASER; INVISIBLE LASER RADIATION WHEN OPEN AVOID; Note : This warning is located inside the enclosure; LASER SAFETY; CAUTION; LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
4 CLASS 1 LASER PRODUCT LASER Type Semiconductor laser GaAlAs Wave lenght 775~795 nm (at 25° C) Output Power 2,5 mW (Read)35 mW (Write) Beam divergence 60 degree. Read carefully the information located at the back plate ofyour CD recorder/player and enter below the Serial N°.Retain this information ...
Page 5 - POLIZA DE GARANTÍA; ESTA POLIZA ES GRATUITA; reparará y devolverá a usted; ESTA POLIZA NO SE HARÁ EFECTIVA EN LOS SIGUIENTES CASOS:; PERIODOS DE GARANTÍA; Es necesario que lea cuidadosamente su instructivo de manejo.; MEXICO
110 POLIZA DE GARANTÍA ESTA POLIZA ES GRATUITA Este aparato ha sido cuidadosamente diseñado y se ha fabricado con los mejores materiales bajo un estrictocontrol de calidad, garantizando su buen funcionamiento por los periodos establecidos según el aparato (verlista en la parte inferior) a partir de ...
Page 6 - TABLE OF CONTENTS; Table of contents
TABLE OF CONTENTS English 5 Table of contents GENERAL INFORMATION AND DISCS Welcome ......................................................................6About this manual........................................................6Technical data ...........................................................
Page 7 - ) throughout the text indicate a sequence of; General; Technical data; GENERAL INFORMATION
English 6 Welcome ! Thank you for buying this Philips Compact Disc Recorder /Player Double Deck. In the eighties Philips invented a new audio system - the CD.The CD (compact disc) revealed to you the new dimensions ofdigital sounds and added to the pleasures of audio.Compact disc technology permits ...
Page 8 - CDRW compatible CD; Accessories; Maintenance; Discs for recording; GENERAL INFORMATION AND DISCS
English 7 For recording use, special audio discs must be used (for musiconly). These Discs bear the logos as shown below. The text‘DIGITAL AUDIO’ is present! Your recorder uses two types of discs for recording purposes: - CD-Audio Recordable (CDR) discs: fully recorded and finalised, these discsplay...
Page 9 - Note: Unless stated otherwise, all controls are on the front of; Controls on the front; CONTROLS AND CONNECTIONS
English 8 CD recorder 1 POWER ON/OFF ........turns the CD recorder ON or OFF (if the recorder is in Standby mode,any key press will activate the CDrecorder) 2 Standby indicator 3 Disc tray 4 OPEN/CLOSE / ..........opens/closes disc tray 5 PLAY/PAUSE 2 ; ......starts play/interrupts play or recording...
Page 10 - FE; DISPLAY indications
English 9 1 Connection to power supply 2 ANALOG OUT CD ....connects CD player deck to the line input of an amplifier (left andright) 3 DIGITAL OUT CD ......connects CD player deck to the digital coaxial input of e.g.amplifier or recording device 4 ANALOG IN ................connects to the line outpu...
Page 11 - DISPLAY messages; DISPLAY
English 10 Messages, as listed and explained here, may appear on thedisplay for your guidance. General READING ..........................reading disc information OPEN ..................................during tray opening CLOSE ..............................during tray closing NO DISC ..................
Page 12 - Menu messages; Connections general; MENU messages - See Menu mode
English 11 Menu messages NO TRACKS ....................when attempting to edit text for a disc which has no tracks TEXT EDIT ....................when entering Text Edit mode ALBUM ARTIST ............when editing or erasing an artist name ALBUM TITLE ..............when editing or erasing a title ARTI...
Page 13 - Cable; Analogue connections CD player deck; INSTALLATION
English 12 This connection must be made for playback on the CDrecorder deck as well as the CD player deck (cable 2 ). Cable 1 is only required if you want to make recordings from an external analogue source. Use the audio cables supplied. Connect the red plugs to the R sockets, and the white plugs t...
Page 14 - Use the digital coaxial cable supplied.; Digital optical connections CD recorder
English 13 This connection is only required if you want to makerecordings from an external CD player with a digital coaxialoutput. Use the digital coaxial cable supplied. 1 For external recording, connect the cable 4 between the DIGITAL IN-socket on the CD recorder and the DIGITAL OUT-socket of an e...
Page 15 - The CD recorder will switched on.; Inserting batteries in the remote control
English 14 1 Plug the power cord supplied into the MAINS connector onthe CD recorder, then into a mains socket. 2 Press POWER ON/OFF. ➜ The CD recorder will switched on. Note:- If the CD recorder is in Standby mode (red led on), press any key to activate the recorder. - The CD recorder will automati...
Page 16 - inserted, the display shows; Inserting discs; REMOTE CONTROL
English 15 STANDBY B B ....................switches to Standby/On SCAN ................................plays the first 10 seconds of each track SHUFFLE ............................plays CD(RW) or program in random order REPEAT ..............................repeat play Number/alphabet keys 0 - 9 .......
Page 17 - Serial Copy Management System; For recording from CD changers always use; For recording from external sources:; Recording modes; RECORDING
English 16 You will soon discover how easy it is to make your own CDs.Nevertheless, it is advisable to use a CDRW disc for your firsttry. We will describe: - Recording from internal CD player deck: high speed or listen mode. - Recording from an external CD player deck: synchronised start with CD pla...
Page 18 - Preparing for high speed recording; Note: Copy prohibited tracks will be copied analogue.; Note: In this Recording mode, the Pause function is not; High speed recording from internal CD player
English 17 During high speed recording the sound is not audible. Preparing for high speed recording 1 Make sure that the recording disc is absolutely free ofscratches and dust particles. 2 Press RECORDING-TYPE to choose the type of recording: once: to select ‘ RECORD FAST ’ if you wish to make a fas...
Page 19 - Preparing for Listen mode recording; Listen mode recording from internal CD player
English 18 During Listen mode recording you listen to the recordingwhile you are making it. Preparing for Listen mode recording 1 Make sure that the recording disc is absolutely free ofscratches and dust particles. 2 For recording, press RECORDING-TYPE twice: ➜ the display first shows the selection....
Page 20 - - Recording from CD-changers should always be started in the; Preparing for manual recording; Note: Auto track works only with Consumer Sources with a; Start manual recording; , the recorder will stop and go; Manual recording from external CD player
English 19 Important: - Recording from CD-changers should always be started in the Auto-Start mode. - Only make analogue recordings when digital recording is not possible. Preparing for manual recording 1 Make sure the disc is absolutely free of scratches and dustparticles. 2 Press EXT(ernal) SOURCE...
Page 21 - Preparing for autostart recording; Start autostart recording; stop after 20 seconds silence.
English 20 For recording from CD changers always use REC EXT DISC . The CD-SYNC feature enables you to make fast and easyrecordings of a CD. Track increments are automaticallydetected from the source material. Track increments cannotbe added manually. In analogue source material a silence of2.7 seco...
Page 22 - Auto finalising; - When a CDR is finalised no more recordings can be added.; Unfinalising CDRW discs; Finalising CDR & CDRW discs
English 21 During finalising the Table of Contents (TOC) is written to thedisc. Finalising is a simple procedure, necessary to:- be able to play recordings on a CD PLAYER,- avoid further unwanted recordings on a disc,- avoid erasure of tracks on a CDRW,- write CD text on a CDR(W). Auto finalising Au...
Page 23 - To erase one or more tracks from the end:; ERASE TRACK; To erase the entire disc:; ERASE DISC; ERASE; Erasing CDRW discs
English 22 For unfinalised CDRW discs only. You can erase:- Tracks can only be erased from the end. - With the EASY JOG you can erase more tracks. Note: It is not possible to erase tracks within thesequence. - It is also possible to erase the entire disc at once. To erase one or more tracks from the...
Page 24 - DJ MODE; PLAYING
English 23 Your CD recorder is able to play the two decks sequentially(CHANGER mode). This is the default setting. 1 Select Changer mode using the DJ MODE key. ➜ CHANGER appears on the display and CHANGER lights up. 2 On the deck you want to play, press PLAY/PAUSE 2 ; to start CD play. ➜ 2 lights up...
Page 25 - Selecting a track during play; Note: Shuffle is also cleared if you open the disc tray.; or; is also cleared if you open the disc tray.; Repeat CD, track or program; Search; Selecting a track
English 24 Selecting a track during play 1 Turn the EASY JOG/ENTER key until the required tracknumber appears on the display. ➜ Play skips to the beginning of the selected track. or Select CDR or CD on the remote control and key in therequired track number using the numerical keys on theremote contr...
Page 26 - Programming for playback; Programming for recording; PROG FULL; Clearing a program; Remarks about programming; PROGRAMMING
English 25 • You can program up to 99 tracks to play in any desired sequence. • Tracks can be programmed more than once, but each time counts as a track.( STEP ) • A program for playback can be made from both the disc in the recorder deck and the disc in the player deck. A programfor recording can o...
Page 27 - General operation of Menu; MENU MODE; MAIN MENU
• In Menu mode you will have access to a number of features which are not available via the regular keys (on the deck’sfront and the remote control). • The TEXT submenus (A-B) allow you to give names to discs and tracks. The disc and track names will be displayedduring playback. • In the RECORDING s...
Page 28 - - When an artist’s name has been stored for a certain track,
CD Text can be added to a recording or changed.This can bedone in Stop mode or during recording. Text will be stored in the recorder memory and can be editeduntil the CDR is finalised. Text on a (unfinalised) CDRW canbe edited at any time. 1 Press STORE/MENU. ➜ TEXT EDIT appears on the display. 2 Pr...
Page 29 - MEMORY VIEW; C. Reviewing CD Text in memory / memory view
CD Text is stored in the recorders memory. When a CDR(W)will be finalised the CD Text will be written on the disc andremoved from the recorders memory. With the MEMORYVIEW function one can view/delete the CD Text in therecorders memory per unfinalised disc. The amount ofmemory used is displayed each...
Page 30 - SET BALANCE; AUTO TRACK
1 Press STORE/MENU. ➜ TEXT EDIT appears on the display. 2 Rotate the EASY JOG/ENTER key to select the AUTO TRACKsubmenu. ➜ AUTO TRACK appears on the display. 3 Press EASY JOG/ENTER to confirm. ➜ ON appears on the display. 4 Turn the EASY JOG/ENTER key to select Auto track ON or OFF . • When ON is se...
Page 31 - TROUBLESHOOTING; FIXING PROBLEMS
If your CD recorder is defective, it is wise to check this listfirst. You may have forgotten a simple step. Warning! Under no circumstances should you attempt to repairthe CD recorder yourself as this will invalidate theguarantee. SYMPTOM • possible solution: No power • ensure that the POWER ON/OFF ...
