Philips CDC 775 - Manual
Philips CDC 775 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Connections; Digital Out; Connecting Headphones; at the minimum level.; English; INSTALLATION
- Page 3 – FUNCTIONAL OVERVIEW; S T
- Page 4 – Remote Control
- Page 5 – Display; - 5 CD number indicator; WR
- Page 6 – Inserting the CDs; dISC; LOAD; CLOSE; Always; Normal Playback (PLAY; PLAY; PLAYBACK
- Page 7 – S T; and
- Page 8 – are not available in SHUFFLE mode.
- Page 9 – SELECt dISC; VOLUME; VOL LOCK
- Page 10 – FULL; PROGRAM; – If the total playing time is more than “; Playing The Program ( PLAY
- Page 11 – cannot; be used for CDs containing; Before Recording; RM; Recording; EDIT
- Page 12 – EdIt; Maintenance; The CDs; Environmental Information
- Page 13 – Technical Data; Subject to modification; Replace or clean the CD.; ADDITIONAL INFORMATION
Thank you for selecting the Philips CDC 775
Compact Disc Changer.
A Compact Disc Changer of the state-of-the-art Philips
700 series, the CDC 775 combines supreme playback
quality with a high degree of user-friendliness by
offering the following possibilities:
– able to play CD-RW disc
;
– changing CDs during play;
– quick access to a particular CD by means of QUICK
PLAY;
– storing 40 tracks from different CDs in any desired
order in the changer memory;
– storing the required recording time and playing time
in the EDIT mode.
Power Supply Setting
• Check that the type plate on the rear of your changer
indicates the correct supply voltage.
• If your mains supply voltage is different, consult your
dealer or our Service Organisation.
Siting the Compact Disc Changer
Free standing
• Always position the changer horizontally on a flat,
firm surface.
• Allow a free space of at least 3 cm above the
changer so as not to interfere with the cooling of the
changer.
In an audio rack
• The changer can be sited in any desired position.
Stacked
• Site the changer preferably at the bottom or at the
top.
• Never position the changer directly on top of a high-
power amplifier, as such an amplifier gives off a
substantial amount of heat.
RECEIVER
CD CHANGER
CASSETTE DECK
9
English
Introduction . . . . . . . . . . . . . . . . . . . . . . .9
Installation . . . . . . . . . . . . . . . . . . . .9 - 10
Functional Overview . . . . . . . . . . .11 - 13
Playback . . . . . . . . . . . . . . . . . . . . .14 - 18
Programming . . . . . . . . . . . . . . . . . . . . .18
Edit . . . . . . . . . . . . . . . . . . . . . . . . . .19 - 20
Additional Information . . . . . . . . .20 - 21
Troubleshooting . . . . . . . . . . . . . . . . . . .21
CONTENTS
INTRODUCTION
INSTALLATION
pg 09-21/CDC775/17-Eng 2/16/00 9:26 AM Page 9
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Connections 1 Digital Out This output supplies digital signal and can thereforeonly be connected to an input which is suitable forthis signal. Use here a lead with one cinch plug oneither end. Never connect this socket to a non-digital inputof an amplifier, such as AUX, CD, TAPE, PHONOetc! 2 Analog ...
11 English FUNCTIONAL OVERVIEW 1 POWER-ON/ OFF Switching on and off. 2 EDIT Activating the EDIT function when making arecording. 3 PROGRAM Opening the memory when compiling a program. 4 TIME Selecting the information you want to see on thedisplay. 5 SCAN Automatically playing the beginning of each t...
Remote Control 1 PAUSE ; Interrupting play. 2 SCAN Automatically playing the beginning of each track. 3 PROG. Opening the memory when compiling a program. 4 DISC – Selecting another CD during play. – Selecting a CD to start play with. – Selecting CDs when compiling a Program, PeakSearch or Edit. 5 T...
