Philips BT2000A/37 - User Manual

4 EN Overview of the speaker a DC IN • Recharge the built-in batter y with a USB cable. b AUDIO IN • Connect an external audio device. c LED indicator d OFF/AUDIO IN/ • Select Bluetooth or AUDIO IN source. • Turn the speaker off. e PAIRING • Disconnect Bluetooth connection. • Enter Bluetooth pairing...

5 EN 3 Get started Always follow the instructions in this chapter in sequence. Attach the string For easy carr ying, attach the supplied string to this speaker as illustrated. Charge the built-in battery The speaker is powered by a built-in rechargeable batter y. Note • Before use, fully charge the ...

6 EN 4 Play Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices. Play from Bluetooth devices Note • Make sure that your Bluetooth device is compatible with this speaker. • Before pairing a device with this speaker, read its user manual for Bluetooth ...

7 EN 2 Slide the OFF /AUDIO IN/ switch to AUDIO IN . » The LED indicator becomes white. 3 Play audio on the external device (refer to its user manual). Fold or unfold the speaker • To achieve better bass effect, unfold the speaker as illustrated. • To make the speaker smaller, fold the speaker. Adju...

8 EN 5 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 W RMS Frequency Response 80 -16000 Hz, ±3 dB Signal to Noise Ratio >70 dBA Audio-in Input 300mV RMS Speaker Speaker Impedance 4 ohmSpeaker Driver 4.5 cm f...

9 EN 6 Troubleshooting Warning • Never remove the casing of this device. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this device, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips W...

10 EN 7 Notice Any changes or modifications made to this device that are not expressly approved by WOOX Innovations may void the user’s authority to operate the equipment. Notice for the USA and Canada This device complies with Par t 15 of the FCC Rules and license-exempt RSS standard of Industr y C...

11 EN Always bring your product to a professional to remove the built-in batter y. Environmental information All unnecessar y packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, prot...