Page 2 - SAFETY INSTRUCTIONS
User Manual BDL5571V 1 SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present ...
Page 4 - REGULATORY INFORMATION
User Manual BDL5571V 3 REGULATORY INFORMATION CE DECLARATION OF CONFORMITY MMD declare under our responsibility that the product is in conformity with the following standards • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance ...
Page 5 - POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE
User Manual BDL5571V 4 POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The ...
Page 6 - INFORMATION FOR UK ONLY
User Manual BDL5571V 5 INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S....
Page 7 - NORTH EUROPE (NORDIC COUNTRIES) INFORMATION; Attention users in United States:
User Manual BDL5571V 6 NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT ...
Page 8 - TABLE OF CONTENTS; NAVIGATING THE OSD MENU USIN
User Manual BDL5571V 7 TABLE OF CONTENTS 1. UNPACKING AND INSTALLATION ................................................................................................................... 9 1.1. UNPACKING ...................................................................................................
Page 10 - UNPACKING AND INSTALLATION; Any other optional accessories will be packed separately.
User Manual BDL5571V 9 1. UNPACKING AND INSTALLATION 1.1. UNPACKING This product is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. The weight of the product differs - depending on the type. Due to the size and weight it is ...
Page 11 - How to use the Logo Guider for Portrait Mode?
User Manual BDL5571V 10 1.4. PORTRAIT MOUNTING Wall mounting holes Notes: Metric 8 (12mm) screws are needed for wall mounting (not included). The mounting interface should comply with the UL1678 standard in North America. The mounting means should be strong enough to bear the weight of the monit...
Page 13 - Before moving the monitor, remove the cord first.; Clamper; Screw Holes
User Manual BDL5571V 12 1.5.3 Prevent monitor from falling To prevent the monitor from tipping in the event of an earthquake or other incident, please follow these steps . As shown in the figure below, secure the monitor to a solid wall or pillar using a cord which is strong enough to bear the weigh...
Page 14 - PARTS AND FUNCTIONS; and the image brightness will be auto adjusted when
User Manual BDL5571V 13 2. PARTS AND FUNCTIONS 2.1. FRONT VIEW 1. Remote control sensor, ambient light sensor and power status indicator Receives command signals from the remote control. Detects the ambient lighting condition around the monitor and the image brightness will be auto adjusted when...
Page 15 - To switch the power on or put the monitor to standby.
User Manual BDL5571V 14 2.2. REAR VIEW 1. POWER button ( ) To switch the power on or put the monitor to standby. 2. MUTE button To switch the audio mute ON/OFF. 3. SOURCE button To set the function while OSD menu is on or to activate input selection menu while OSD menu is off. 4. PLUS (+) button To ...
Page 17 - the AC IN socket of another BDL5571V monitor or; VGA IN
User Manual BDL5571V 16 7. SPEAKERS R/L Outputs the audio signal from the AUDIO IN ( AUDIO1 / AUDIO2 / AUDIO3 ) or HDMI jack to external speakers. 8. Main power switch Press to switch the main power on/off. 9. AC OUT Connect to the AC IN socket of another BDL5571V monitor or an external media device...
Page 21 - CONNECTIONS TO EXTERNAL EQUIPMENT
User Manual BDL5571V 20 3. CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. USING THE SWITCH COVER You can use the switch cover to prevent the monitor from being turned on or off accidentally. Downloaded From TV-Manual.com Manuals
Page 24 - PC
User Manual BDL5571V 23 PC Downloaded From TV-Manual.com Manuals
Page 27 - External speaker
User Manual BDL5571V 26 External speaker Downloaded From TV-Manual.com Manuals
Page 28 - External audio device
User Manual BDL5571V 27 3.5.2. CONNECTING EXTERNAL AUDIO DEVICE Connect the red (R) and white (L) audio jacks of the external audio device to the AUDIO OUT R/L jacks of the monitor. External audio device Downloaded From TV-Manual.com Manuals
Page 29 - CONNECTING ANOTHER BDL5571V MONITOR; Note: Maximum 9 displays
User Manual BDL5571V 28 3.6. CONNECTING ANOTHER BDL5571V MONITOR You can interconnect multiple BDL5571V monitors to create a daisy-chain configuration for applications like a TV wall. Note: Maximum 9 displays that can be used in a daisy-chain configuration, using the optional DVI Modules. Connect ...
Page 41 - 中文
User Manual BDL5571V 40 4.2.5. CONFIGURATION 1 MENU Auto adjust Note: For the VGA input only. Use this function to let the monitor automatically optimize the display of VGA input image. Press the SET/PLUS button to open the submenu, and then press the SET button to adjust. Power save Set the monitor...
Page 42 - Choose to enable or disable the; DHCP
User Manual BDL5571V 41 Brightness - Select On and the brightness of the image will be reduced to an appropriate level, and the Brightness setting in the Picture menu will become unavailable. Use the PLUS / MINUS button to make selection. Pixel Shift - Select the time interval for the monitor to...
Page 44 - For the VGA input only.; the; UP; button to togglebetween
User Manual BDL5571V 43 4.2.7. ADVANCED OPTION MENU Input resolution Note: For the VGA input only. Set the resolution of the VGA input. This is only required when the monitor is unable to detect the VGA input resolution correctly. Press the SET/PLUS button to open the submenu, and then press the UP ...
Page 48 - slot and minute slot.
User Manual BDL5571V 47 4. Press the PLUS button to highlight the OFF item. Press the UP / DOWN button to set the hour when the monitor will be turned off, then press the PLUS button to move to the minute slot to set the minute. If you do not want to use a power off time, select "__" for the...
Page 52 - PIXEL DEFECT POLICY; subpixel
User Manual BDL5571V 51 6. PIXEL DEFECT POLICY Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- d...
Page 53 - BRIGHT DOT EFFECT; MODEL; BLACK DOT EFFECT; dark sub pixel; TOTAL DOT DEFECTS OF ALL TYPES
User Manual BDL5571V 52 6.3. BRIGHT DOT DEFECTS Bright dot defects appear as pixels or sub-pixels that are always lit or "on". These are the examples of bright dot defects: One lit red, green or blue sub-pixel Two adjacent lit sub-pixels: - Red + Blue = Purple - Red + Green = Yellow - Green ...
Page 54 - CLEANING AND TROUBLESHOOTING; Cautions When Using the Display
User Manual BDL5571V 53 7. CLEANING AND TROUBLESHOOTING 7.1. CLEANING Cautions When Using the Display Do not bring your hands, face or objects close to the ventilation holes of the display. Top of display is usually very hot due to the high temperature of exhaust air being released through the ven...
Page 56 - TECHNICAL SPECIFICATIONS; Display
User Manual BDL5571V 55 8. TECHNICAL SPECIFICATIONS Display Item Specifications Screen Size (Active Area) 55” LCD Aspect ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4845 (H) x 0.4845 (V) [mm] Displayable colors 1.06B colors Brightness 500 cd/m 2 Dynamic contrast ratio 3000:1 Contra...