Philips AZ2055 - Manual

Philips AZ2055 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

English

CONTROLS

DIGITAL TUNER

Tuning to radio stations

Press

to on, then press

SOURCE

to select

TUNER

–

is displayed briefly and then the radio station

frequency, waveband and, if programmed, a
preset number are shown. (See

)

Press

BAND

once or more to select your

waveband.

Press and hold

∞

until the frequency in the

display starts running.

™

The radio automatically tunes to a station of
sufficient reception. Display shows
during automatic tuning.

™

If a FM station is received in stereo,

shown.

Repeat steps 2-3 if necessary until you find the
desired station.

• To tune to a weak station, press

∞

briefly

and repeatedly until you have found optimal
reception.

To improve radio reception:

• For

, extend, incline and turn the telescopic

antenna. Reduce its length if the signal is too
strong.

• For

, the set uses a built-in antenna. Direct this

antenna by turning the whole set.

Programming radio stations

You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).

Manual programming

Tune to your desired station (see Tuning to radio
stations).

Press

PROG

to activate programming.

Press

PRESET DOWN/ UP

once or more to select

a preset number.

Press

PROG

to confirm.

Repeat steps 1-4 to store other stations.

Note: You can erase a preset station by storing
another frequency in its place.

Autostore

Autostore automatically starts programming radio
stations from preset 1. Available stations are
programmed in order of waveband reception strength:
FM, followed by AM. Any previous presets e.g.
manually programmed will be erased.
• Press

PROG

for 4 seconds or more to activate

autostore programming.

™

The display shows

AUTO

program

blinks,

followed by the radio station details when
stored. (See

)

After all stations are stored, the first autostore preset
station will then automatically play.

To listen to a preset or autostore station

Press the

PRESET

(up or down) buttons once or more

until the desired preset station is displayed.

CD PLAYER

Playing a CD

This CD player plays Audio Discs including
CD-Recordables and CD-Rewritables.

Press

to on, then

SOURCE

to select

™

if no CD is inserted.

Insert a CD with the printed side facing up and
close the CD door.

™

Display: total number of tracks and playing time.

™

is shown if you have inserted a

non-finalized CD-R(W).

Press

to start playback.

™

if your CD contains non-audio

files

To pause playback press

. Press

again to

resume play.

To stop CD playback, press

Note: CD play will also stop when:

– the CD door is opened
– the CD has reached the end
– you select tape or tuner source.

GENERAL INFORMATION ON RECORDING

• Recording is permissible insofar as copyright or.

other rights of third parties are not infringed.

• For recording, use only NORMAL type cassettes

(IEC type

) on which the tabs have not yet been

broken. This deck is not suited for recording on
CHROME (IEC

) or METAL (IEC

) type cassettes.

• The best recording level is set automatically.

Altering the

VOLUME

DBB

BASS

MID

HIGH

controls will not affect the recording.

• To protect a tape from accidental erasure, break

out the tabs. If you wish to record again, cover the
tabs with a piece of adhesive tape.

CD Synchro Start recording

Select CD function.

Insert a CD and if desired, program track numbers.

Open the cassette door.

Insert a suitable tape into the cassette deck and
close the door.

Press

RECORD

to start recording.

– Playing of the CD program starts automatically

from the beginning of the program. You don’t
need to start the CD player separately.

™

To select and record a particular passage within
a CD track:

• Press

∞

. Release the control when you

recognize the passage you want.

• To pause CD playback, press

• Recording starts from this exact point in the

track when you press

RECORD

To pause recording, press

PAUSE

;

Press

PAUSE

;

again to resume recording.

To stop recording, press

STOP/OPEN

Recording from the Radio

Tune to the desired radio station (see Tuning to
radio stations).

Follow steps 3-7, under Synchro Start CD
recording.

Maintenance & Safety

CD player and CD handling

(See

)

• If the CD player cannot read CDs correctly, use a

cleaning CD to clean the lens before taking the set
to repair.

• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature

can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.

• Always close the CD door to avoid dust on the

lens.

• To clean the CD, wipe in a straight line from the

center towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.

• Never write on a CD or attach any stickers to it.

Safety Information

• Don’t expose the set, batteries, CDs or cassettes to

humidity, rain, sand or excessive heat.

• Clean the set with a dry cloth. Don’t use any

cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the set.

• Place the set on a hard and flat surface so that the

system does not tilt. Make sure there is good
ventilation to prevent the set overheating.

• The mechanical parts of the set contain self-

lubricating bearings and must not be oiled or
lubricated.

Tape deck maintenance

(See

)

To ensure quality recording and playback of the tape
deck, clean parts

and

as shown, once a

month. Use a cotton bud slightly moistened with
alcohol or a special head cleaning fluid to clean the
deck.

Open the cassette door.

Press

PLAY

and clean the roller

Press

PAUSE

;

and clean the heads

, and the

capstan

After cleaning, press

STOP/OPEN

Batteries

(not included)

• Insert 6 batteries, type

R-20

UM-1

D-cells

(preferably alkaline) with the correct polarity.

Remote control

(for AZ2055 only /See

)

• Insert 2 batteries, type

AAA

R03

UM4

(preferably alkaline).

Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or cause
the batteries to burst.

•

Do not mix battery types:

e.g. alkaline with carbon

zinc. Only use batteries of the same type for the
set.

• When inserting new batteries, do not try to mix old

batteries with the new ones.

•

Batteries contain chemical substances,
so they should be disposed of properly.

Using AC Power

Check if the power supply, as shown on

the type

plate located on the bottom of the set

corresponds to your local power supply. If it does
not, consult your dealer or service center.

If your set is equipped with a voltage selector,
adjust the selector so that it matches with the
local power .

Connect the power cord to the wall outlet.

To disconnect the power supply, unplug the set
from the wall outlet.

Auto-Standby mode

When a CD or tape has reached the end of playback
and remains in the stop position for more than
15 minutes, the set will switch off automatically to
save energy.

The type plate is located on the bottom of the
set.

BASIC FUNCTIONS

Switching on and off and selecting function

Press

on the set to switch on.

Press

SOURCE

once or more to select:

TUNER

TAPE

function.

Press

to switch off the set.

Notes:
– To change from

TAPE

TUNER

function, or

when you are switching off the set: first, make
sure you press the tape

STOP

key to end

playback and all the cassette keys are released.

– The tone, sound settings, tuner presets and the

volume level (up to a maximum volume level of 20)
will be retained in the set’s memory.

Adjusting volume and sound

Adjust the volume with the

VOLUME

control.

™

Display shows the volume level and a number
from 0-32. (See

)

Press

DBB

once or more to select dynamic bass

boost on or off.

™

Display: shows

when activated.

To adjust the bass, mid and treble tones, press and
hold

–

on the

BASS, MID, HIGH

keys until

you reach the desired level,

–5

™

Display briefly shows

BASS

MID

, or

HIGH

and the

level. (See

)

Note: To prevent sound interference the bass control
options operate exclusively. You cannot combine the
bass from

BASS

with

DBB

™

The display shows

or the

indicator is

automatically switched off to remind you if you
attempt to use both bass settings.

Selecting a different track

• Press

∞

on the set, once or repeatedly to

select.

• In the pause/stop position, press

to start

playback.

Finding a passage within a track

Press and hold

∞

™

The CD is played at high speed and low volume.

When you recognize the passage you want, release

∞

to resume normal playback.

Note: During a CD program or if shuffle/ repeat
active, searching is only possible within a track.

Different play modes: SHUFFLE and REPEAT

You can select and change the various play modes
before or during playback, and combine the modes
with

PROGRAM

shuffle

– tracks of the entire CD/ program are

played in random order

shuffle

and

repeat all

– to repeat the entire CD/

program continuously in random order

repeat all

– repeats the entire CD/ program

repeat

(and

shuffle repeat

) – plays the current

(random) track continuously

To select play mode, press

MODE

once or more.

Press

to start playback if in the stop position.

To select normal playback, press

MODE

repeatedly

until the various modes are no longer displayed.
– You can also press

to cancel your play mode.

Programming track numbers

In the stop position, select and store your CD tracks in
the desired sequence. Up to 20 tracks can be stored in
the memory.

Press

∞

on the set to select your desired

track number.

Press

PROG

™

If you attempt to program without first selecting
a track number,

is shown.

Repeat steps 1-2 to select and store all desired
tracks.

™

Display:

if you try to program more than

20 tracks.

Reviewing the program

In the stop position, press and hold

PROG

until the

display shows all your stored track numbers in
sequence.

Erasing a program

You can erase the program by:
• pressing

twice

™

is displayed briefly and

disappears.

• selecting

TAPE

TUNER

source.

CASSETTE RECORDER

Cassette playback

Press

to on, then

SOURCE

to select

TAPE

™

Display: shows

throughout tape

operation.

Insert a cassette and close the door.

Press

PLAY

to start playback.

To pause, press

PAUSE

;

. Press again to resume.

Press

SEARCH

to fast wind the tape.

To stop the tape, press

STOP/OPEN

• The keys are automatically released at the end of a

tape, except if

PAUSE

;

has been activated.

Remote control does not function properly
(AZ 2055 only)

– Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

– Distance/ angle between the set too large

• Reduce the distance/ angle

No sound /power

– Volume not adjusted

• Adjust the VOLUME

– Power cord not securely connected

• Connect the AC power cord properly

– Batteries dead/ incorrectly inserted

• Insert (fresh) batteries correctly

– Headphones connected to the set

• Disconnect headphones

Severe radio hum or noise

– Electrical interference: set too close to TV, VCR or

computer

• Increase the distance

Poor radio reception

– Weak radio signal

• FM: Adjust the FM telescopic antenna

Poor cassette sound quality

– Dust and dirt on the heads, etc.

• Clean deck parts, see Maintenance

– Use of incompatible cassette types

(METAL or CHROME)

• Only use NORMAL (IEC

) for recording

Recording does not work

– Cassette tab(s) may be broken

• Apply adhesive tape over the missing tab space

indication

– CD badly scratched or dirty

• Replace/ clean CD, see Maintenance

– Laser lens steamed up

• Wait until lens has cleared

indication

– CD-R(W) is blank/ not finalized

• Use a finalized CD-R(W)

indication

– CD-ROM disc inserted/

CD contains non-audio files

• Use CD Audio discs only/

press

∞

once or more to skip to a CD audio

track instead of the data files

The CD skips tracks

– CD damaged or dirty

• Replace or clean CD

– SHUFFLE or PROGRAM is active

• Switch off SHUFFLE / PROGRAM

TOP AND FRONT PANELS

(See

)

SOURCE

– selects CD/ TUNER / TAPE function

– power on/ off switch

Display

– shows the status of the set

Cassette recorder keys

RECORD

– starts recording

PLAY

– starts playback

SEARCH

– fast winds/rewinds tape

STOP/OPEN

– opens the cassette compartment
– stops the tape

PAUSE

;

– pauses playback or recording

BASS, MID, HIGH

– EQ keys to adjust the bass,

mid & treble frequencies

PROG

CD:

programs tracks and reviews the program;

Tuner:

programs preset radio stations

Navigation controls

∞

CD:

– searches back and forward within a
track;
– skips to the beginning of a current
track/previous/ later track

Tuner:

– tunes to radio stations

(down, up)

– starts or pauses CD playback

– stops CD playback;
– erases a CD program

MODE

– selects different play modes:

e.g.

REPEAT

SHUFFLE

(random) order

PUSH TO OPEN

– opens/closes the CD door

VOLUME

– to adjust volume level

REMOTE SENSOR

(for AZ2055 model only)

–

infrared sensor for remote control

PRESET DOWN/ UP

(

–, +

) – selects a preset

tuner station

(down, up)

BAND

– selects waveband

DBB

– (Dynamic Bass Boost) activates a more

vivid bass response

BACK PANEL

Telescopic antenna

– improves FM reception

Battery compartment

– for 6 batteries,

type R-20, UM1 or D-cells

(

– 3.5 mm stereo headphone jack

Note: The speakers will be muted when
headphones are connected to the set.

)

AC MAINS

– inlet for power cord

REMOTE CONTROL

(for AZ2055 only)

VOLUME

– adjusts volume level

(up, down)

SHUFFLE

– plays all CD tracks in random order

– starts/ pauses CD playback

SEARCH

– searches backwards/ forwards

within a track

PRESET +, –

– selects a preset radio station

(up, down)

TUNING

∞

– tunes to tuner stations

(down, up)

– stops CD playback;
– erases a CD program

™

– skips to the beginning of a current track

previous/ subsequent track

REPEAT

– repeats a track /program/ entire CD

CAUTION

Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

POWER SUPPLY

Whenever convenient, use the power supply to
conserve battery life. Make sure you remove the
power plug from the set and wall outlet before
inserting batteries.

BASIC FUNCTIONS

DIGITAL TUNER

WARNING

Do not open the set as there is a risk of electric shock! Under no circumstances should you try to
repair the set yourself, as this will invalidate the warranty.

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service center.

Audio

CD Soundmachine

AZ 2050,

AZ 2055

CASSETTE RECORDER

MAINTENANCE & SAFETY

DIGITAL TUNER

CASSETTE RECORDER

TROUBLESHOOTING

Environmental information

We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard,
expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe
the local regulations regarding the disposal of packaging, dead batteries and old equipment.

C D RE WR

ITAB

HIN

CD S

YNC

HRO

STA

RT R

ECO

RDIN

REC

ORD

POW

BASS

PRO

MOD

REM

SENS

VOLUM

HIGH

MID

SOU

RCE

30 PRESET

DIGIT

AL TUNER

BAN

DIG

ITA

DYN

IC B

ASS B

PRE

SET

PRE

SET

PLA

SEA

RCH

STO

P/O

PEN

PAU

See

(

)

!@#

VOLUME

PRESET

TUNING

REPEAT

SHUFFLE

Remote control

for AZ2055 model only

• Once your Philips purchase is

registered, you’re eligible to receive all
the privileges of owning a Philips
product.

• So complete and return the Warranty

Registration Card enclosed with your
purchase at once. And take advantage
of these important benefits.

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

Warranty

Verification

Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.

Owner

Confirmation

Your completed Warranty
Registration Card serves
as verification of
ownership in the event of
product theft or loss.

Model

Registration

Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
owner of your model.

This “bolt of lightning”

indicates uninsulated material
within your unit which may

cause an electrical shock. For the safety
of everyone in your household, please
do not remove product covering.

The “exclamation point” calls

attention to features for
which you should read the

enclosed literature closely to prevent
operating and maintenance problems.

WARNING:

TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE.

CAUTION:

To prevent electric

shock, match wide blade of plug to
wide slot, and fully insert.

For Customer Use

Enter below the Serial No. which is located
on the bottom of the cabinet. Retain this
information for future reference.

Model No. _________________________

Serial No. _________________________

Know these

ssa

affe

etty

symbols

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Vérification

de garantie

Enregistrez votre produit
dans les 10 jours pour
confirmer votre droit à une
protection maximum selon
les termes et les conditions
de votre garantie Philips.

Confirmation

de possession

Votre carte
d'enregistrement de
garantie prouve que vous
possédez l'appareil en cas
de vol ou de perte du
produit.

Enregistrement

du modèle

Renvoyez votre carte
d'enregistrement de garantie
dès aujourd'hui pour vous
assurer de recevoir toutes les
informations, les offres et les
bonus auxquels vous avez
droit en tant que ossesseur
de ce modèle.

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE,

NE PAS ENLEVER LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL

NE COMPORTE AUCUNE PIECE POUVANT REPAREE PAR L’UTILISATEUR.

CONFIER SON ENTRETIEN A UN TECHNICIEN QUALIFIE.

A T T E N T I O N

• Dès que l'achat de votre appareil

Philips est enregistré, vous avez droit à
tous les avantages dont bénéficient les
possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d'enregistrement de garantie jointe à
votre appareil sans tarder. Vous
bénéficierez de ces avantages
importants.

Renvoyez votre carte d'enregistrement de garantie

pour vous assurer de recevoir tous les avantages

auxquels vous avez droit.

Cet «éclair à pointe de
flèche» indique qu'un
matériau non isolé, situé à

l'intérieur de l'unité, risque de
provoquer un choc électrique. Pour la
sécurité de chacun, nous vous prions de
ne pas retirer le boîtier de ce produit.

Le «point d'exclamation»
attire votre attention sur des
sujets risquant de provoquer

des problèmes de fonctionnement et
d'entretien si vous ne lisez pas les
informations s'y reportant.

DANGER:

NE PAS EXPOSER

CET ÉQUIPEMENT A LA PLUIE NI A
UNE HUMIDITÉ EXCESSIVE POUR
ÉVITER LES RISQUES D'INCENDIE ET
DE CHOC ÉLECTRIQUE.

ATTENTION:

Pour éviter les

chocs électriques, introduire la lame la
plus large de la fiche dans la borne
correspondante de la prise et pousser
jusqu'au fond.

Cet espace vous est réservé

Inscrivez ci-dessous le numéro de série
situé à la basse du bloc. Conservez cette
information pour vous y reporter à l'avenir.

N° de modèle _____________________

N° de série ________________________

Connaissez ces

symboles de

ssé

éccu

urriitte

EL6095T004 / 8-02

This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.

Philips,P .O.Box 520890,Miami,FL 33152,USA,(402) 536-4171

This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the
following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired

operation.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement soumis aux deux conditions
suivantes:
1 Cet appareil ne doit pas provoquer d’interférences nuisibles, et
2 Cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer

un fonctionement peu satisfaisant.

CAUTION

L’emploi de commandes, de réglages ou l’application de procédures autres que ceux mentionnés dans ce
manuel peuvent occasionner des radiations d’exposition ou un fonctionnement dangereux.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento dependiente de dos
condiciones siguientes:
1 Este aparato no puede provocar interferencia dañina, y
2 Este aparato debe aceptar cualquier interferencia recibida, incluyendo las interferencias que pueden provocar

un funcionamiento insuficiente.

ATENCIÓN

El uso de mandos o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar
peligro de exposición a radiación.

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Verificación

de la garantía

Registre su producto dentro
de 10 días para confirmar
su derecho a máxima
protección bajo los
términos y condiciones de
la garantía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro de la
Garantía comprueba que
Ud. es el dueño del aparato
en caso de robo o pérdida
del producto.

Registro

del modelo

La devolución inmediata de
su Tarjeta de Registro de la
Garantía le garantiza que
recibirá toda la información y
todas las promociones
especiales que le
corresponden por ser el
dueño de su modelo.

• Una vez que se registre la compra de su

aparato Philips, Ud. tiene derecho a
todas las ventajas correspondientes al
dueño de un producto Philips.

• Sírvase llenar y devolver en seguida la
Tarjeta de Registro de la Garantía
empacada con su aparato. Saque
provecho de estas ventajas importantes.

Envie hoy su Tarjeta de Registro de la Garantía para

recibir todas las ventajas correspondientes.

El símbolo del “rayo” indica
que algún material no aislado
dentro de su unidad podría

resultar en una sacudida eléctrica. Para
la seguridad de todos, favor de no
remover la cubierta del producto.

El “signo de exclamación” le
llama la atención a
características sobre las que

Ud. debe leer la información adjunta
detenidamente para evitar problemas
de funcionamiento y mantenimiento.

ADVERTENCIA:

PARA

EVITAR EL RIESGO DE SACUDIDA
ELECTRICA O INCENDIO, NO
EXPONGA ESTE EQUIPO A LLUVIA
NI A HUMEDAD.

PRECAUCION:

Para evitar

sacudida eléctrica, introduzca la patilla
ancha del enchufe al fondo de la ranura
ancha.

Para uso del cliente:

Escriba abajo el número de serie que se
encuentra en la base del aparato. Guarde
esta información para el futuro.

No. de modelo _____________________

No. de serie _______________________

Conozca estos

simbolos de

sse

urriid

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

NOTES

Audio

CD Soundmachine

AZ-2050

•

AZ-2055

Need help? Call us!

Philips representatives are ready to help you with
any questions about your new product. We can guide you
If you have any problems, Philips Representatives can
through Connections, First-time Setup, or any of the Features.
We want you to start enjoying your new product right away!

CALL US BEFORE YOU CONSIDER
RETURNING THE PRODUCT!

1-800-531-0039

Visit us on the web at www.philips.com

E E

W H Y I N S

I D

RTAN

Return

your Warranty

Registration Card

within 10 days

Remote Control for
AZ2055 model only

Printed in China

CMM/0251

CLASS 1

LASER PRODUCT

AZ 2050
AZ 2055

English

ran

ais

Espa

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near
water.

Clean only with dry cloth.

Do not block any ventilation
openings. Install in accordance
with the manufacturer´s
instructions.

Do not install near any heat
sources

such as radiators, heat

registers, stoves, or other apparatus
(including amplifiers) that produce heat.

Do not defeat
the safety
purpose

the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.

10.

Protect the power cord

from being

walked on or pinched, par ticularly at
plugs, convenience receptacles, and the
point where they exit from the
apparatus.

11.

Only use attachments/accessories

specified by the manufacturer.

12.

Use only with the cart

stand, tripod, bracket, or table
specified by the manufacturer
or sold with the apparatus.
When a car t is used, use
caution when moving the
car t/apparatus combination
to avoid injur y from tip-over.

13.

Unplug this apparatus

during

lightning storms or when unused for
long periods of time.

14.

Refer all servicing

to qualified

ser vice personnel. Ser vicing is required
when the apparatus has been damaged
in any way, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.

15.

Battery usage

CAUTION

–

To prevent batter y leakage which may
result in bodily injur y, proper ty damage,
or damage to the unit:

●

Install

all

batteries correctly,

and

marked on the unit.

●

Do not mix batteries (

old

and

new

carbon

and

alkaline

, etc.).

●

Remove batteries when the unit is not
used for a long time.

EL 6475-E004: 02/8

AC Polarized

Plug

Class II equipment symbol

This symbol indicates that the unit has a double insulation system.

PORTABLE AUDIO

90 Days Free Exchange

This product must be carried in for an exchange.

WHO IS COVERED?

You must have proof of purchase to exchange the
product. A sales receipt or other document showing
that you purchased the product is considered proof of
purchase. Attach it to this owner’s manual and keep
both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your
product. For 90 days thereafter, a defective or
inoperative product will be replaced with a new,
renewed or comparable product at no charge to you. A
replacement product is covered only for the original
warranty period. When the warranty on the original
product expires, the warranty on the replacement
product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:
•

labor charges for installation or setup of the
product, adjustment of customer controls on the
product, and installation or repair of antenna
systems outside of the product.

•

product repair and/or part replacement because
of misuse, accident, unauthorized repair or other
cause not within the control of Magnavox.

•

reception problems caused by signal conditions or
cable or antenna systems outside the unit.

•

a product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed,
manufactured, approved and/or authorized, or
repair of products damaged by these
modifications.

•

incidental or consequential damages resulting
from the product. (Some states do not allow the
exclusion of incidental or consequential damages,
so the above exclusion may not apply to you. This
includes, but is not limited to, prerecorded
material, whether copyrighted or not
copyrighted.)

•

a product used for commercial or institutional
purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where
the product is officially distributed by Magnavox. In
countries where Magnavox does not distribute the
product, the local Magnavox service organization will
attempt to provide a replacement product (although
there may be a delay if the appropriate product is not
readily available).

BEFORE REQUESTING EXCHANGE…

Please check your owner’s manual before requesting
an exchange. Adjustments of the controls discussed
there may save you a trip.

EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact 1-800-705-2000 to arrange an exchange. Or,
ship the product, insured and freight prepaid, and with
proof of
purchase enclosed, to the address listed below.

Magnavox Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A., Puerto Rico, and U.S. Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this express
warranty. But, because some states do not allow
limitations on how long an implied warranty may last,
this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA…

Please contact Magnavox at:

1-800-661-6162 (French Speaking)

1-800-705-2000 (English or Spanish Speaking)

(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of
merchantability or fitness for a particular purpose.
Magnavox is not liable under any circumstances for any
direct, indirect, special, incidental or consequential
damages, howsoever incurred, even if notified of the
possibility of such damages.)

REMEMBER…

Please record below the model and serial numbers
found on the product. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.

MODEL #

_________________________________

SERIAL #

_________________________________

LIMITED WARRANTY

3140 115 3038.1

XP AZ 2050/2055/17 4x4 4/11/03 3:41 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.