Philips 8FF3FPW - Manual

Philips 8FF3FPW – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

PhotoFrame Firmware Upgrade Instructions

Applicable models

8FF3FPB, 8FF3FPW

Firmware version

058

Release date

October 20, 2008

Release notes

- Preloaded baby photo is deletable

Important notice before updating

The firmware upgrade process will remove all photos currently stored on PhotoFrame.
Please make sure all photos on PhotoFrame are properly backed up before updating.

Please follow the steps below to upgrade the PhotoFrame firmware.

Format SD (Secure Digital) card

Copy all files from the ‘

Firmware

’ folder into the root folder of the SD card

(The root folder is the ‘highest’ folder in hierarchy, for example

F:\

)

Make sure PhotoFrame is powered Off

Insert SD into PhotoFrame with the new firmware into the PhotoFrame

Push the Power button to power on the PhotoFrame

The firmware upgrade will start automatically

Warning:

Upgrade takes about 1 minute.

During the upgrade do not disconnect power, remove the memory or make new

connections. Otherwise this may harm your PhotoFrame.

When "

Please reboot system!

" shows, firmware upgrade has finished

Remove the memory from the PhotoFrame

Power Off the PhotoFrame and Power On afterwards by pushing the Power button

The upgrade has completed

You can check the new firmware version via

Setup

→

Status

→

Firmware

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.