Page 2 - Contents
EN 2 1 Important 3 Safety 3 Care 4 Legal 5 Sustainability 7 Help and support 9 2 Use your TV 10 TV controls 10 Watch TV 12 View programme guide 15 Watch 3D 16 Ambilight 17 Play multimedia files 18 Smart TV 20 Interactive TV 22 3 Use more of your TV 24 Pause TV 24 Record TV shows 25 Use Skype™ 27 Pla...
Page 3 - Important; Safety; Precautions
EN 3 En gl is h 1 Important Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! Never expose the TV to rain or water. Never place liquid containers, s...
Page 4 - D health warning; Care; Screen
EN 4 Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. Educate children about the dangers of climbing on furniture to reach the TV. Risk of swallowing batteries! The product/remote control may contain a coin...
Page 5 - D glasses; Placement tips; Lock the TV; Legal; Notice
EN 5 En gl is h 3D glasses For sets with 3D glasses supplied. Follow these instructions to take care of your glasses: Use a clean soft cloth (microfibre or cotton flannel) to clean the lenses to avoid scratching them. Never spray cleaner directly on the 3D glasses. You can use pre-moistened cleani...
Page 6 - Open source
EN 6 TP Vision Netherlands B.V. cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible. Terms of wa...
Page 7 - Trademarks and copyrights; Sustainability; Energy efficiency
EN 7 En gl is h Trademarks and copyrights Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Manufactured under licence from Dolby Laboratories. Dolby and the double D symbol are trademarks of Dolby Laboratories. The term...
Page 8 - Recycling
EN 8 Screen off: If you only want to listen to audio from the TV, you can switch off the TV display. Other functions continue to operate normally. While you watch TV, press the Green button and select [Screen off] . Light sensor: When the surrounding light darkens, the built-in ambient light sen...
Page 9 - Help and support
EN 9 En gl is h Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for ...
Page 10 - Use your TV; TV controls; Rear controls
EN 10 2 Use your TV TV controls Rear controls 1. (Standby): Switch the TV on or off. 2. CH +/-: Switch to the next or previous channel. 3. (SOURCE): Watch a connected device. 4. +/- (Volume): Increase or decrease volume. Sensors and indicators 1. Standby indicator LED and remote control sensor The s...
Page 11 - EasyLink controls
EN 11 En gl is h 13. LIST: Access the TV channel list. 14. EXIT: Exit menus or TV functions. 15. INFO: Display information about current activity. 16. OPTIONS: Access currently available options, picture and sound menus. 17. (Back): Return to the previous menu page or exit from a TV function. 18. CH...
Page 12 - Watch TV; Switch TV on or off
EN 12 Watch TV Switch TV on or off Switch the TV on Connect the TV to the mains outlet and switch on the main power. If the TV is not switched on, the standby LED remains off. Press on the TV. If the standby LED is lit, press on the remote control. Note: There is a short delay before the TV re...
Page 13 - Switch TV channels
EN 13 En gl is h Switch TV channels Press CH +/- on the remote control or TV. Press the Numeric buttons on the remote control to enter a channel number. Manage favourite channels You can view all channels or only a list of your favourite channels. Create a list of your favourite channels 1. Pres...
Page 15 - Change picture format; View programme guide; What you can do
EN 15 En gl is h Change picture format You can change the picture format to suit the video source. 1. Press FORMAT . 2. Select a picture format, then press OK . The available picture formats depend on the video source: [Auto fill] : Adjust the picture to fill the screen (subtitles remain visible)....
Page 16 - Watch 3D; What you need
EN 16 Select Internet programme guide Before you use the programme guide, check the following settings: 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [TV guide] . 3. Select [From the Internet] , then press OK . Access Internet programme guide 1. Press . 2. Select [TV g...
Page 17 - Convert 2D to 3D; Ambilight
EN 17 En gl is h 3. Select a setting, then press OK . [Automatic] : TV switches to 3D automatically. [Notification only] : TV displays notification first. [Never] : No notification. Select a source with 3D For 3D discs: 1. Play the disc on a 3D Blu-ray disc player that is connected to the TV H...
Page 18 - Change settings; Play multimedia files
EN 18 Change settings 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Ambilight] . 3. Select a setting, then press OK . [Mode] : Select an Ambilight mode from [Off] , [Dynamic] or [Static]. - [Off] : Switch off Ambilight. - [Dynamic] : Select if you want Ambilight to resp...
Page 19 - Play files from USB device
EN 19 En gl is h Tips: Select the top bar to filter your files by type. Select [Sort] to arrange the files by album name, artist or other fields. To clear the list of offline media servers, press OPTIONS , then select [Clear offline servers] and press OK . Play files from USB device If you hav...
Page 20 - Smart TV
EN 20 To search forward or backwards, press or . Press repeatedly to toggle between different speeds. To stop the music, press . Music options While you play music, press OPTIONS , then press OK to select an option: [Repeat] : Select [Repeat] to play a track or an album repeatedly, or select [...
Page 22 - Interactive TV
EN 22 Access websites 1. Select an Internet app, then press OK . 2. Select the web address field, then press OK . A keyboard appears on the screen. 3. For each character of the web address, select the character, then press OK . Tip: You can also use the Numeric buttons on the TV remote control to en...
Page 23 - Access interactive TV
EN 23 En gl is h Here are some examples of interactive activities you can enjoy: View information about TV programmes Take part in a quiz or competition Play games Shop online Pay for a video-on-demand (VOD) programme Vote Chat What you need To enjoy this service, you need: Digital c...
Page 24 - Pause TV; Install USB hard drive
EN 24 3 Use more of your TV Pause TV What you can do While you watch a digital channel, you can pause a programme to answer a phone call or to have a break. The broadcast is stored on a USB hard drive that is connected to the TV. You can resume playback of the programme at any time. Note: You can ...
Page 25 - Pause a live TV broadcast; Record TV shows
EN 25 En gl is h Pause a live TV broadcast 1. On a digital channel, press to pause a TV programme. 2. Press to continue watching. The status bar shows the following time indicators: A. When the programme was paused for the first time. B. Where the paused programme is currently playing. C. Where the ...
Page 26 - Start recording; Schedule recordings
EN 26 Do not overload the USB port. If you connect a USB hard drive device that consumes more than 500mA power, make sure that it is connected to its own external power supply. Note: Make sure that the TV and the USB hard drive are switched off. While you are formatting the USB hard drive, do ...
Page 27 - Watch recordings; Use SkypeTM
EN 27 En gl is h Schedule a TV programme recording You can schedule a recording of an upcoming programme that will be broadcast today or in up to eight days' time. You can also schedule a timed recording that is not linked to any programme, if programme guide information is not available. 1. Press ,...
Page 29 - Make voice and video calls
EN 29 En gl is h Rename a contact 1. In the Skype menu, select [Contacts] , then press OK . 2. Select a contact, then press OPTIONS . 3. Select [Rename] , then press OK . 4. Follow the onscreen instructions to edit the information. Block a contact 1. In the Skype menu, select [Contacts] , then press...
Page 31 - Play games; View Text; Select a page
EN 31 En gl is h Change your Skype password 1. In the Skype menu, select [Settings] , then press OK . 2. Select [Change Password] , then press . 3. Follow the onscreen instructions to enter your current and new passwords. 4. Once complete, select [Apply] , then press OK . Play games What you can do ...
Page 32 - Set locks and timers
EN 32 Press CH + / CH - to view the next or previous page. Press the Colour buttons to select a colour coded item. Text options 1. While you view text, press OPTIONS . 2. Select an option: [Freeze page] / [Unfreeze page] : Freeze or unfreeze the current page. [Dual screen] / [Full screen] : ...
Page 33 - Sleep timer
EN 33 En gl is h Display the TV clock 1. While you watch TV, press OPTIONS . 2. Select [Clock] , then press OK . The clock is displayed on the top right-hand corner of the TV screen. Change the clock mode You can change the clock mode to automatic or manual. By default, it is set to automatic mode, ...
Page 34 - Parental rating
EN 34 Parental rating You can set your TV to display only programmes with age ratings lower than your child's age. This restriction only applies to digital channels from broadcasters that rate their programmes according to age. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite setti...
Page 35 - Change your TV; Picture and sound; Settings assistant; More picture settings
EN 35 En gl is h 4 Change your TV settings Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture an...
Page 37 - Reset picture and sound; Channels; Automatic installation
EN 37 En gl is h Reset picture and sound You can restore the default picture and sound settings, while the channel installation settings remain the same. 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [General settings] > [Factory settings] , then press OK . 3. Select [R...
Page 39 - Satellite settings
EN 39 En gl is h Step 1: Check the country setting 1. Switch on the first TV (with the channels that you want to copy to the second TV). 2. Press . 3. Select [Setup] > [Search for channels] > [Reinstall channels] , then press OK . The country menu is displayed. 4. Make a note of the current se...
Page 40 - Add and remove satellites; Language settings; Menu language
EN 40 Select connection type When you install satellite channels, you need to set the connection type. The number of LNBs on your dish antenna determines the number of satellite channels you can install. 1. While you reinstall satellites, select [Settings] , then press OK . 2. Select [Connection typ...
Page 41 - Universal access settings
EN 41 En gl is h 1. While you watch TV, press . 2. Select [Setup] > [Channel settings] or [Satellite settings] > [Languages] . 3. Select [Primary audio language] or [Secondary audio language] and select from the available languages. 4. Press OK to confirm. Subtitles on analogue channels 1. Whi...
Page 42 - Other settings; TV demo; Update software; Check version
EN 42 Select speakers or headphones You can choose to hear the visually impaired audio through the TV speakers, headphones or both. 1. While you watch TV, press OPTIONS . 2. Select [Universal access] > [Visually impaired] . 3. Select a setting, then press OK . [Speakers] : Hear visually impaire...
Page 43 - Update with USB; Update from digital broadcast
EN 43 En gl is h Update with USB What you need A USB storage device that has at least 256 megabytes of storage space, is FAT or DOS formatted and has its write protection disabled. Access to a computer with a USB connector and Internet access. A file archiver program that supports the ZIP file...
Page 44 - Update from the Internet; Reset all
EN 44 Update from the Internet You can also update the TV software directly from the Internet by connecting the TV to the Internet. See Connect your TV > Connect to a Network and the Internet (Page 58). 1. Press . 2. Select [Setup] > [Update software] > [TV with Internet] , then press OK . ...
Page 45 - About cables; Cable quality; HDMI
EN 45 En gl is h 5 Connect your TV About cables Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections sho...
Page 46 - Connect antenna; Connect devices; Blu-ray or DVD disc player
EN 46 Connect antenna Connect the antenna to the TV. Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable. Connect the disc player to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
Page 47 - TV receiver
EN 47 En gl is h TV receiver Connect the satellite* or digital TV receiver to the TV with an antenna cable. *For certain models only. Connect the satellite or digital TV receiver to the TV with an HDMI cable. Connect the digital TV receiver to the TV with a component video cable (Y Pb Pr) and an aud...
Page 48 - Video recorder
EN 48 Connect the digital TV receiver to the TV with a SCART cable. Video recorder Connect the recorder to the TV with an antenna cable. Connect the recorder to the TV with an HDMI cable.
Page 49 - Game console
EN 49 En gl is h Connect the recorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the recorder to the TV with a SCART cable. Game console Connect the game console to the TV with an HDMI cable.
Page 50 - Home theatre
EN 50 Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Home theatre Connect an HDMI-ARC compliant home theatre to the TV with an HDMI cable. Connect the home theatre to the TV with an HDMI cable and a coaxial audio cable.
Page 51 - Digital camera
EN 51 En gl is h Connect the home theatre to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the home theatre to the TV with a SCART cable. Digital camera Connect the digital camera to the TV with a USB cable.
Page 52 - Digital camcorder
EN 52 Digital camcorder Connect the digital camcorder to the TV with an HDMI cable. Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
Page 53 - Connect more devices; USB storage device
EN 53 En gl is h Connect more devices USB storage device Connect the USB hard drive to the TV with a USB cable. Connect the USB flash drive with a USB cable to the TV. Computer Connect the computer to the TV with an HDMI cable.
Page 55 - Watch connected devices; Select a device
EN 55 En gl is h Connect the keyboard and mouse to the TV with a USB cable. When the TV detects the keyboard, you can select the keyboard layout and test your selection. If you have selected a Cyrillic or Greek keyboard layout first, you can also select a secondary Latin keyboard layout. 1. Press . ...
Page 56 - Change device settings; Set up EasyLink devices
EN 56 1. Press SOURCE . 2. Press OPTIONS . 3. Select [Scan connections] , then press OK . 4. Follow the onscreen instructions. Change device settings Change the device type You can change the device type to easily access it from the Source menu. 1. Press SOURCE . 2. Select the device, then press [De...
Page 57 - Control devices
EN 57 En gl is h Switch on EasyLink 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [EasyLink] . 3. Select [EasyLink] > [On] , then press OK . Control devices If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through ...
Page 58 - Retain picture quality; Connect to a network and; Connect
EN 58 1. Press OPTIONS . 2. Select [Picture and sound] > [Speakers] . 3. Select one of the following, then press OK . [TV] : On by default. Stream TV audio through TV and the connected HDMI-CEC audio device until the connected device switches to system audio control. TV audio is then streamed t...
Page 59 - Wired connection
EN 59 En gl is h You can connect this TV to your home network through a wired or wireless connection. For a wired connection, see Connect your TV > Connect to a network and the Internet > Wired connection (Page 59). For a wireless connection, see Connect your TV > Connect to a network a...
Page 60 - Network settings; Connect a CAM
EN 60 If you are connecting to a WPS router, select [WPS] on the TV. If you want to set the PIN code in your router software to connect, select [WPS pin] and note down the code. To enter the encryption key manually, select [Standard] and enter the key when prompted. Set secured connection with...
Page 61 - Access CAM services
EN 61 En gl is h What you need Caution: To protect the CAM from damage, insert the CAM as instructed. Note: Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module. 1. Switch off the TV. 2. Follow the directions printed on the CAM to ins...
Page 62 - Troubleshooting; General issues
EN 62 6 Troubleshooting General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. When you are turning the TV on, off or to standby, you hear a creaking sound from the T...
Page 63 - Picture issues
EN 63 En gl is h No digital channels were found during the installation: See the technical specifications to make sure that your TV supports DVB-T, DVB-C or DVB-S in your country. Make sure that all cables are properly connected and that the correct network is selected. Previously installed chan...
Page 65 - Contact Philips
EN 65 En gl is h Internet access via Smart TV is slow: Try to improve the signal quality between the router and TV if you are accessing the Internet wirelessly. Refer to the router's documentation for details. Always use a fast broadband connection wherever possible. Update your TV with the la...
Page 66 - Specifications; Power and reception
EN 66 7 Specifications Power and reception Product specifications are subject to change without notice. Power Mains power: AC 220-240 V (50-60 Hz) Standby power consumption: < 0.3 W Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specifications at www.ph...
Page 69 - Connectivity
EN 69 En gl is h Supported audio formats Supported subtitle formats Character encoding Windows-1250 (CP-1250): Central Europe and Eastern Europe Latin (Czech, Hungarian, Polish, Slovak, Slovenian, Croatian, Romanian, Serbian) Windows-1251 (CP-1251): Cyrillic Windows-1252 (CP-1252): Western Eur...
Page 70 - Index
EN 70 8 Index 3 3D - 14 3D glasses, care - 5 3D, 2D to 3D - 15 3D, change format - 15 3D, health warning - 5 3D, start - 15 3D, switch off - 15 A Ambilight - 15 Ambilight, lounge light - 16 Ambilight, settings - 16 Ambilight, switch on - 16 amplifier, select output - 47 analogue channels, fine-tune ...
