Page 3 - Table of Contents
- 2 - Table of Contents Version history: ................................................................................................................................... - 1 - 1. General information .....................................................................................................
Page 6 - General information; Notice; Leaflets and product documentation
- 5 - 1. General information In this document, you can find information on how to install the Philips Professional TV’s from the xxHFL3014 range. This document is intended for the System Integrator or the responsible technician of the hotel. You will find descriptions on what functions these new pla...
Page 7 - Definitions, Acronyms and Abbreviations; How to navigate, open menu’s and make selections
- 6 - 1.3 Definitions, Acronyms and Abbreviations [ ]: The values between brackets are referring to a TV menu item or a button on screen “ “: The values between quotation marks are referring to a remote button CDB: CustomDashBoard DVB-T: Digital Video Broadcasting - Terrestrial DVB-C: Digital Video ...
Page 8 - Requirements before starting the installation of a TV; Remote control
- 7 - 2. Requirements before starting the installation of a TV Before starting the installation, make sure that you have everything you need at hand. You need a USB device and a remote control. 2.1 Remote control 2.1.1 Master remote control 22AV8573 or 22AV9573A or 22AV9574A 22AV8573 22AV9573A 22AV9...
Page 9 - Accessory remote controls; Healthcare RC; Setup of the remote controls
- 8 - 2.1.3 Accessory remote controls 22AV1604B Healthcare RC 22AV1601B Easy RC 22AV1604A is not the same RC as 22AV1604B while it looks identical. 22AV1601A is not the same RC as 22AV1601B while it looks identically. 2.1.4 Setup of the remote controls 2.1.4.1 How to setup the Master RC 22AV9574A
Page 11 - Professional Settings menu
- 10 - You can change it back to RC6 mode by pressing 5 seconds “Mute” and ”Channel up” at the same time. You can also use this RC for multi RC. More details can be found in the ‘Professional settings’ chapter. You can program this RC by pressing 2 buttons at the same time for 5 seconds. Below you...
Page 12 - Software upgrade; Insert the USB stick
- 11 - 2.3 Software upgrade For the best guest experience, it is highly recommended to use the latest software version available. Go to: http://www.philips.com/support/ Select your country, enter the model number and download the latest software version available Unzip the software and follow th...
Page 13 - Clone folder structure
- 12 - 2.4 Clone folder structure Below you can find the menu structure of a clone file. Following is the folder name used in the root of the USB device containing the clone data: TPS191HE_CloneData/MasterCloneData/ In the folder ‘TPS191HE_CloneData’, there can be multiple folders (so not only ‘Ma...
Page 14 - Find out the state of the TV; Virgin mode; Using the guest RC with digits: “1 2 3 6 5 4”
- 13 - 3. Find out the state of the TV It is important to know if a TV is in Virgin mode (out of the box) or installed before. When installing a newly bought TV, it will be in virgin mode. 3.1 Virgin mode If you can see below screen, you know that the TV is in ‘out of the box’ state and you can inst...
Page 16 - Reinstall TV; Reinstall the TV manually
- 15 - 4. Reinstall TV 4.1 Reinstall the TV manually If you want to start an installation from scratch you can always reinstall the TV. All settings will be reset to the default values and channel list will be cleared. Note: Some settings like roomID, manual date and time, professional mode, profess...
Page 17 - Reinstall via a script in the clone file
- 16 - Note: Depending on your country and settings, a PIN code can be requested. Select [Yes] and press the “OK” button to reinstall the TV. You will see that the TV will apply a reset and restart into IIC mode. 4.2 Reinstall via a script in the clone file To automatically reinstall the TV, load a ...
Page 18 - Virgin installation wizard; Virgin installation; Disconnect the TV from the mains power
- 17 - 5. Virgin installation wizard Out of the box a new TV will be in virgin mode. This means that you will have to go through the virgin installation wizard to apply the first settings of the TV. You might need to wake up the TV from standby. 5.1 Instant Initial Cloning (IIC) 5.1.1 Virgin install...
Page 21 - Settings during virgin installation
- 20 - 5.2 Settings during virgin installation When you skip the IIC screen, you will be able to set the room ID. Once set, you will have finished the virgin installation and the professional menu will open allowing you to start creating your master clone file.
Page 22 - Professional Settings; Store settings in the Professional Settings menu; Overview; Open this menu item; Pressing “back” will exit this screen again
- 21 - 6. Professional Settings 6.1 General information In this chapter, you can find information about all professional settings that can be changed. To start you have to open the [Professional Settings] menu. Using the guest remote control, press the following keys sequentially: “3 1 9 7 5 3 mute”...
Page 23 - Upgrade and Clone; Navigate to the [Upgrade and Clone] menu; You will see the screen on the left
- 22 - 6.3 Upgrade and Clone o Navigate to the [Upgrade and Clone] menu o You will see the screen on the left Note: Cloning and upgrading over RF will happen automatically after the TV is in standby for 5 minutes if [Auto Upgrade and Clone] in the professional menu is set to [On]. It can also take l...
Page 26 - guest during the upgrade; Switch on settings; Channel Settings; This list also contains the theme’s; Feature Settings; You will see below items:
- 25 - Note: TV will stop the upgrade if TV would be woken up by the guest during the upgrade 6.4 Switch on settings o Navigate to the [Switch On Settings] menu, you will see the screen on the left o In this menu you will be able to set all Switch on settings, these are the menu items that a guest c...
Page 27 - menu; Sound Settings
- 26 - Note: MyChoice will only be visible in this list when they are enabled in [Features] menu 6.4.3 Sound Settings o Navigate to the [Sound Settings] [Volume] menu o You will see below items: o [TV Speakers]: Change the default volume setting for the TV speakers o [Headphone]: Change the default ...
Page 29 - Identification Settings; RoomID; You will see below item:
- 28 - 6.4.6 Guest Management o Navigate to the [Guest Management] [Menu language] menu o You will see a list of languages. This is to select the default language for the menu Note: If you select a language where text is from right to left, also the text of the menu will be shown on the right side o...
Page 30 - Guest Management; Dashboard
- 29 - 6.6 Guest Management o Navigate to the [Guest Management] [Clear User Data] menu o This is to clear the user data, including all app data, passwords as well as user browsing history o You will see below items: o [Off]: Disable the clearing o [Standby and PowerOn]: Clearing will happen when se...
Page 31 - Features; MyChoice; Content Rating
- 30 - Note: This logo can be customized in clone data/file only: “MasterCloneData/ ProfessionalAppsData/ PhilipsHome - File name: logo.png - File resolution: 170x142 (max. resolution: 300x250 but will be downsized) - No upsizing - File format: .png 6.8 Features o Navigate to the [Features] menu o Y...
Page 33 - Channels
- 32 - 6.9 Channels o Navigate to the [Channels] menu o You will see the screen on the left o o Navigate to the [Display Settings] [Show Channels] menu o You will see below items: o [Show Channels]: Select [Yes] to define if channels will be shown in the channel list or disable using [No] o Navigate...
Page 35 - Sources; USB will only deliver 5V
- 34 - o Navigate to the [Channel Settings] menu o You will see below items: o [EPG]: [Enable]: You can enable EPG via [Yes] or disable via [No] The EPG data comes from the broadcaster o [Enable Subtitles]: You can enable the subtitles via [Yes] or disable via [No] o [Enable Teletext]: You can e...
Page 37 - Date and Time
- 36 - 6.11 Date and Time o Navigate to the [Date and Time] menu o You will see the screen on the left o Navigate to the [Source] menu o You will see below items: o [Automatic Channels]: Date and time is received via channels data (can be both RF or IP depending on the installed channels) o [Manual]...
Page 38 - during installation.
- 37 - o Navigate to the [Time Zone Setting] menu Note: This menu in not accessible when [Source] is set to [Manual] o You will see below items: [Time Zone Country]: You can select the country where you are Note: “The Netherlands” is selected irrespective of which country has been selected during in...
Page 39 - Input Control
- 38 - 6.12 Input Control o Navigate to the [Input control] [Remote Control] menu o You will see below items: o [Lock]: The TV will not respond to any RC codes sent to TV by putting Lock to [On], normally this should always be [Off] Note: Using the master RC you would still be able to enter in the p...
Page 40 - Advanced
- 39 - 6.13 Advanced o Navigate to the [Advanced] menu o You will see the screen on the left o Navigate to the [Professional Mode] menu o You will see below items: o [Off]: To put the professional mode Off, this means your TV is in consumer mode o [On]: To put the professional mode On, this means yo...
Page 42 - TV Settings; Picture
- 41 - 6.14 TV Settings o Navigate to the [TV Settings] menu o You will see the screen on the left 6.14.1 Picture o Navigate to the [Picture] menu Note: These settings will be applied when using the [Switch on Settings][Picture Settings][Picture Style][Personal] o You will see below items: o [Colour...
Page 43 - Sound
- 42 - o Navigate to the [Picture] [Advanced] [Contrast] menu o You will see below items: o [Contrast Mode]: Select how the TV automatically reduces the contrast via [Off], [Standard], [Optimized for picture] or [Optimized for energy savings] o [Dynamic Contrast]: Set the level at which the TV autom...
Page 45 - Audio Language Preference; Subtitle Language Preference; Accessibility
- 44 - o [Audio Out Delay]: Switch the delay if a sound delay is set on the Home Theatre System to [On] or [Off] o [Audio Out Offset]: you will see a slider to adjust the audio offset if you cannot set a sound delay on the Home Theatre System. o 6.14.3 Audio Language Preference o Navigate to the [Au...
Page 46 - Reset
- 45 - and visually impaired people or disable using [Off] o [Hearing Impaired]: You can enable hearing impaired for adapted audio and subtitles if available using [On] or disable using [Off] o [Audio Description]: [Audio Description]: Using [On] you can enable the accompanying audio commentary if...
Page 48 - Manage MyChoice; How does it work
- 47 - 6.16 Manage MyChoice To manage MyChoice you have to go to the [Professional Settings] [Features] [MyChoice] menu. When you open this menu, you will see the possibility to configure MyChoice. More information can be found on http://www.my-choice.tv/. [Enable] allows you to configure the featur...
Page 49 - How to configure MyChoice
- 48 - 6.16.2 How to configure MyChoice There are 3 packages available: ‘Setup Free Package, ‘Setup Package 1’, and ‘Setup Package 2’. By default all channels, externals and features are in the ‘Setup Free Package’ package. Select in [Professional Settings] [Features] [MyChoice] the package [Setup F...
Page 50 - Platform specific
- 49 - By selecting a channel in the list of [Setup Package 2] the same channel will be “unselected” in the list of [Setup Free Package]. Customers who have no PIN Customers who have PIN for Package 1 Customers who have PIN for Package 2 Setup Free Package Yes Yes Yes Setup Package 1 No Yes No Setup...
Page 51 - MyChoice remote activation
- 50 - keys are used per package and so on. You can open CSM menu and scroll down to the MyChoice CSM page 8. If you have a location that has frequent room changes for instance like a hospital. It’s possible to disable all currently active MyChoice subscriptions with the following key code "7 8 ...
Page 53 - Manage Channels; Rename channels
- 52 - 6.17 Manage Channels Note: Some of the pictures below might be slightly different to the screens you will see on your TV related to SW versions. Functionality and different option stay the same as described in this chapter! You can manage your channels, this means you can rename, reorder, hid...
Page 54 - Reorder channels; Navigate to the channel you want to reorder; Press “OK” to move the channel to your selected location
- 53 - 6.17.2 Hide/Show channels By using the hide/show channels, you will hide or show a channel in the channel list. Go to the manage channel list, select the channel you want to hide or unhide. Press ”Options”, select [Hide] (when channel is currently visible) or [Show] (when channel is currently...
Page 55 - Remove channels
- 54 - 6.17.4 Blank/ Non-Blank channels By using the blank/nonblank channels you will blank the video and audio from a channel but the channel will still be shown in the channel list. Go to the manage channel list, select the channel you want to blank or unblank. Press ”Options”, select [Blank] (whe...
Page 56 - Channel installation wizard; Install RF channels
- 55 - 6.18 Channel installation wizard 6.18.1 Install RF channels To install channels you have to go to the [Professional Settings] [Channels] [RF Channel Installation] menu. In this menu you can go to [Search for Channels] or do a [Digital: Manual Installation] or do an [Analogue: Manual Installat...
Page 60 - Make use of CMND; Connect the TV via RF
- 59 - 7. Make use of CMND This chapter describes the TV settings to connect to a CMND server over RF. For the CMND settings please refer to the CMND manual on https://io.cmnd.pro/ . You at least need CMND 7. 7.1 Connect the TV via RF Via RF, the TV does not report to the CMND server because of the ...
Page 61 - Examples; ChannelList.xml in the clone file; Add an RF channel in the ChannelList.xml
- 60 - 8. Examples 8.1 ChannelList.xml in the clone file After you have set your settings correctly you can clone TV to USB to change the channel list. The channel list can be edited via CMND or you can do this using an xml editor tool. The folder name used in the root of the USB device containing t...
Page 62 - RoomSpecificSettings in the clone file
- 61 - <Broadcast medium = "dvbc" frequency = "801937" system = "west" serviceID = "927" ONID = "1" TSID = "3" modulation = "auto" symbolrate = "6877000" bandwidth = "Auto" servicetype = "Radio" /> <Setup preset...
Page 63 - Capture logs from TV on USB; Create a new text file on a FAT32 formatted USB stick
- 62 - 8.3 Capture logs from TV on USB Sometimes if you would have a problem, it can be requested by the technical team to share a clone file and logs of the issue you have reported. To make logs you need to do following steps: Create a new text file on a FAT32 formatted USB stick Rename the ...
