Philips 42PFL7666T/12 - User Manual

EN 6 3D TV This is a 3D TV. Connect your TV to a 3D Blu-ray disc player or tune in to a TV channel that broadcasts programmes in 3D. Read more in Use your TV > Watch 3D (Page 18 ). Important Safety Read and understand all instructions before you use your TV. If damage is caused by failure to foll...

EN 7 En gl is h  Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.  Parts of this product may be made of glass. Handle with care to avoid injury and dam...

EN 8  Parents should monitor their children during 3D viewing and ensure they do not experience any discomfort as mentioned above. Watching 3D is not recommended for children under 6 years of age as their visual system is not fully developed yet.  Do not use the 3D glasses for any purpose other th...

EN 9 En gl is h When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local ru...

EN 10 To find the length of screw, add the thickness of your wall mount to the screw length, as shown in the graphic. For 47 inch to 55 inch TVs: Before you wall mount the TV, find the correct length of screw. To find the length of screw, add the thickness of your wall mount to the screw length, as ...

EN 11 En gl is h Contact Philips If you like, you can contact Philips Consumer Care in your country for support. You can find the contact number in the leaflet accompanying the TV. Before you contact Philips, note down your TV model and serial number. You can find this information on the back of you...

EN 12 2 Use your TV Controls TV controls 1. +/-: Increase or decrease volume. 2. AMBILIGHT : Switch Ambilight on or off. Ambilight is available on certain models only. 3. ( Home ): Access the Home menu. Press again to launch an activity in the Home menu. Confirm an entry or selection. 4. CH +/- : Sw...

EN 13 En gl is h 4. ( Home ): Access the Home menu. 5. ( Navigation buttons ): Navigate through menus and select items. 6. CH - / CH + ( Previous/Next ): Switch channels, navigate through menu pages, tracks, albums or folders. 7. OK : Confirm an entry or selection. 8. ( Back ): Return to the previou...

EN 14 For remote control with AAA batteries (side by side): For remote control with CR2032 (3V) batteries: EasyLink controls Note : EasyLink controls are available when the connected device is HDMI-CEC compliant. EasyLink allows you to control your TV and other HDMI-CEC devices with one remote contr...

EN 15 En gl is h  If the TV is in standby, press on the remote control. Note: There is a short delay before the TV responds. Tip: If you cannot find your remote control and want to switch on the TV from standby, press CH +/- on the front of the TV. Though your TV consumes very little energy in stan...

EN 17 En gl is h  [Vivid] : Rich and dynamic settings, ideal for daytime viewing.  [Natural] : Natural picture settings.  [Cinema] : Ideal settings for movies.  [Game] : Ideal settings for games.  [Energy saving] : Settings that conserve the most energy.  [Standard] : Default settings that sui...

EN 18 You can also press SOURCE to display a list of connector names. Select the connector that connects the device to the TV. 1. Press SOURCE . 2. Press the Navigation buttons to select a connector in the list. 3. Press OK to confirm. Play from USB If you have photos, videos or music files on a USB...

EN 19 En gl is h Before you watch 3D, read the health warning information in Get started > Important > 3D Health warning (Page 7 ). Note : Passive 3D glasses from other manufacturers may not work or offer less optimal 3D viewing. Start 3D To enjoy a 3D movie or programme, insert a 3D movie dis...

EN 20 What you need  For the best Ambilight effect, position the TV 25cm away from the wall.  Keep the remote control away from the TV, as it can interfere with the infrared signals.  Dim the light in the room. Switch on 1. Press ADJUST . 2. Select [Ambilight] , then press OK . 3. To switch Ambil...

EN 21 En gl is h Browse PC through DLNA What you can do If you have photos, videos or music files stored on a computer connected through a home network, you can play the files on your TV. What you need  A wired or wireless home network, connected with a Universal Plug and Play (uPnP) router.  A Ph...

EN 22  By default, Windows Media Player shares files from these folders: My Music , My Pictures , and My Videos . 6. If your files are in other folders, select Organize tab and select Manage libraries > Music . Follow the onscreen instructions to add the folders that contain your media files. En...

EN 25 En gl is h 1. Switch on the TV. 2. As illustrated, insert the SD memory card into the SD card slot on the side of the TV. The TV automatically starts formatting the card. 3. After formatting, leave the SD card in the slot. View a video store 1. Press . 2. Select [Browse Net TV] and press OK . ...

EN 26 To switch the [Smart picture] setting to [Game] , 1. Press ADJUST . 2. Select [Smart picture] > [Game] , and then press OK . The TV is ready for gaming. Note : Do not forget to switch back to your usual [Smart picture] setting when you stop gaming. Start a two-player game Some games offer m...

EN 27 En gl is h 3 Use more of your TV Pause TV What you can do While watching a digital channel, you can pause a programme to answer an urgent phone call or to have a break. The broadcast is stored on a USB hard disk that is connected to the TV; you can replay the broadcast instantly. Note:  The m...

EN 28 Pause a live TV broadcast 1. On a digital channel, press (pause) to pause a TV broadcast. 2. Press (play) to continue watching. The status bar shows the following time indicators: A. When the programme is paused for the first time. B. Where the paused programme is currently playing. C. Where t...

EN 30 If your TV remote control does not have a button: 1. Press and select [Programme guide] . 2. With the current TV programme selected, press OPTIONS and select [Record] . The TV sets the end time of the recording to the end of the programme. 3. Select [Schedule] and press OK to start recording. ...

EN 31 En gl is h 1. Select the recording in the list and press OPTIONS . 2. Select [Delete recording] and press OK . Cancel a scheduled recording To cancel a scheduled recording: 1. Select the recording and press OPTIONS . 2. Select [Cancel recording] and press OK . Expired recordings Broadcasters c...

EN 32 View Teletext Select a page 1. Select a channel that has teletext feature, then press TEXT . 2. Select a page in one of the following ways:  Enter the page number with the Numeric buttons .  Press or to view the next or previous page.  Press the Colour buttons to select a colour coded item....

EN 33 En gl is h To switch Teletext 2.5 on or off 1. Press . 2. Select [Setup] > [TV settings] > [Preferences] . 3. Select [Text 2.5] > [On] or [Off] , then press OK . Set locks and timers Clock You can display a clock on the TV screen. The clock displays the time that is broadcast by your ...

EN 35 En gl is h 1. Connect the USB storage device to the TV. 2. Press . 3. Select [Browse USB] , then press OK . 4. Select a picture, then press OPTIONS . 5. Select [Set as Scenea] , then press OK . 6. Select [Yes] , then press OK . 7. Press any button to exit Scenea. Set Scenea lounge light When t...

EN 37 En gl is h Select speaker output with Adjust menu If [EasyLink] or [EasyLink autostart] are selected, access the adjust menu to switch the TV audio. 1. While you watch TV, press ADJUST . 2. Select [Speakers] , then press OK . 3. Select one of the following, then press OK :  [TV] : On by defau...

EN 38 4 Set up your TV Settings assistant Use the settings assistant to guide you through the picture and sound settings. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings] , then press OK . 3. Select [Start] , then press OK . 4. Follow the onscreen instructions...

EN 39 En gl is h Audio settings Select audio language If the TV channel has multiple or dual sound broadcast, you can select the preferred audio language. While you watch TV, press OPTIONS .  [Audio language] : Select the audio language for digital channels.  [Dual I-II] : Select the audio languag...

EN 41 En gl is h  Press the Navigation buttons or Numeric buttons to manually enter the channel frequency.  Select [Search] then press OK to search for the next channel automatically. 3. When the correct channel frequency is entered, select [Done] , then press OK . 4. Select [Store as new channel]...

EN 42  the same hardware type, as indicated by the sticker on the back of the TV, (for example Qxxx.xx.Lx), and  compatible software versions. An onscreen message will notify you if the channel list cannot be copied to the second TV. Note: If you are prompted to enter a code, enter '8888'. Copy ch...

EN 43 En gl is h To switch on hearing impaired audio and subtitles 1. While you watch TV, press OPTIONS . 2. Press one of the following buttons to select an option:  Red : Switch hearing impaired on or off.  Green : Switch on hearing impaired audio and subtitles. 3. Press to exit. Visually impaire...

EN 44 For more information, see the following pages. Update with USB Before performing this procedure, make sure that you have the following:  Spare time to complete the entire update.  A USB flash drive that has at least 256MB of storage space, is FAT or DOS formatted, and has its write protectio...

EN 45 En gl is h  If a power failure occurs during the update, do not remove the USB storage device from the TV. The TV continues to update as soon as power is restored.  If an error occurs during the update, retry the procedure. If the error reoccurs, contact Philips Consumer Care. 1. Switch on t...

EN 46 5 Connect your TV About cables Cable quality Overview Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality cables ensure a good transfer of picture and sound. The connections...

EN 47 En gl is h SCART A SCART cable combines video and audio signals. SCART connectors can handle RGB video signals but cannot handle high-definition (HD) TV signals. VGA Use this connection to display PC content on the TV. For video and sound, use the VGA and AUDIO IN connectors. Connect devices O...

EN 48 Blu-ray or DVD disc player Connect the disc player with an HDMI cable to the TV. Connect the disc player with a component cable (Y Pb Pr) and an audio L/R cable to the TV. TV receiver Connect the satellite or digital TV receiver with an antenna cable to the TV. (SAT is available on certain mod...

EN 50 Recorder Connect the recorder with an antenna cable to the TV. (SAT is available on certain models only.) Connect the recorder with a SCART cable to the TV. Connect the recorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Game console The most practical connectors for a ...

EN 51 En gl is h Connect the game console with an HDMI cable to the TV. Connect the game console with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Home theatre system Connect the home theatre with an HDMI cable and an optical cable to the TV.

EN 52 Connect the home theatre with a SCART cable to the TV. Connect the home theatre with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Digital camera Connect the digital camera with a USB cable to the TV.

EN 53 En gl is h Digital camcorder Connect the digital camera with an HDMI cable to the TV. Connect the digital camcorder with a component cable (Y Pb Pr) and an audio L/R cable to the TV. Connect more devices External hard disk Connect the external hard disk with a USB cable to the TV.

EN 54 Computer Connect the computer with an HDMI cable to the TV. Connect the computer with a DVI-HDMI cable to the TV. Connect the computer with a VGA cable and an audio cable to the TV. Keyboard and mouse USB keyboard *Available on certain models only. You can connect a USB keyboard to enter text ...

EN 55 En gl is h If you have selected a Cyrillic or Greek keyboard layout first, you can also add a second keyboard with Latin layout. To change the keyboard layout setting, press > [Setup] > [TV settings] > [Preferences] > [USB mouse/keyboard] > [Keyboard settings] and press OK . TV ...

EN 56 Wi-Fi MediaConnect With Wi-Fi MediaConnect you can bring up (project) your PC screen on the TV screen wirelessly. You start Wi-Fi MediaConnect from your PC. See Connect your TV > Computers and the Internet > (Page 59 ). What you need Warning: This TV complies with the EMC directive only ...

EN 57 En gl is h Wireless LAN ready This section is only for wireless ready TVs . With the Wireless USB adapter PTA01 accessory (sold separately), you can connect the TV to your home network wirelessly. You can enjoy the best of the web from Net TV services, and sharing of content between your devic...

EN 58 Find this hexadecimal key in the router software on your PC. Write down the first key of the WEP keys list and enter it on the TV with the remote control. If the security key is accepted, the TV is connected with the wireless router. If asked, agree to the End User License Agreement. If you ar...

EN 60 Stop projecting To stop projecting, click on the TV icon again. Project your PC: Help To read the Wi-Fi MediaConnect Help, right-click the program icon in the notification tray of the PC and select Help. Notes You can project high-definition (HD) or standard-definition (SD) video, depending on...

EN 61 En gl is h Watch CAM services 1. After inserting and activating the CAM, press OPTIONS . 2. Select [Common interface] , then press OK . 3. Select the CAM provider and press OK .

EN 62 6 Troubleshooting Contact Philips Warning: Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty. If you cannot resolve your problem, refer to the frequently asked questions (FAQs) for this TV at www.philips.com/support . Yo...

EN 63 En gl is h Picture The TV is on, but there is no picture or the picture is distorted:  Make sure that the antenna is properly connected to the TV.  Make sure that the correct device is selected as the display source.  Make sure that the external device or source is properly connected. There...

EN 65 En gl is h 7 Product specifications Power and reception Product specifications are subject to change without notice. Power  Mains power : AC 220-240 V~, 50/60 Hz  Standby power consumption : <0.15 W  Ambient temperature: 5 to 40 degrees Celsius  For power consumption, see the product sp...

EN 66 Video formats (Resolution - refresh rate) 480i - 60 Hz 480p - 60 Hz 576i - 50 Hz 576p - 50 Hz 720p - 50Hz, 60 Hz 1080i - 50Hz, 60 Hz 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60 Hz Multimedia Supported multimedia connections  USB : NTFS, FAT 16, FAT 32. Connect only USB devices which consume 500mA of p...

EN 67 En gl is h  Service port: SERV.U  Headphones: stereo 3.5mm mini-jack  SAT: F-pin (Satellite). Available on certain models only. Bottom  Ethernet LAN RJ-45  DIGITAL AUDIO OUT: Optical  HDMI 1 - 3  AUDIO IN: DVI/VGA (stereo 3.5mm mini-jack)  Antenna: 75 ohm coaxial  VGA: PC input Side ...

EN 68 Use your TV legend to note the dimensions of your TV (with and without the stand). Use your TV legend to note the thickness of your TV (with and without the stand). Help version UMv 3139 137 04523 - 20120305

EN 69 En gl is h 8 Index 3 3D - 18 3D glasses - 8 3D, health warning - 7 A age rating - 34 analogue channels, fine-tune - 41 analogue channels, subtitles - 34 audio language - 39 C CAM, enable - 61 CAM, insert - 60 CAM, see Conditional Access Module - 60 care - 7 channel list - 16 channels, favourit...