Page 2 - Safety warnings; Tip; : reduce contrast and brightness when; General
2 EN Safety warnings Do not insert the power plug in a wall socketor hang the TV to the wall before allconnections are made. • Place or hang the TV wherever you want, but make sure that air can circulate freely through theventilation slots. • Do not install the TV in a confined space such as a book ...
Page 3 - and; Supported video formats; Getting started; Warning; Before you start
Before you switch on your TV, connect all your peripheral equipment. See To make video and audioconnections, p. 43. There is a wide range of audio and video equipment that can be connected to your TV. See To makeaudio and video connections, p. 43. EXT1 can handle CVBS, RGB and Audio L/R; EXT2 can ha...
Page 4 - : for best quality use the suppressor cable supplied.; : verify that the mains supply voltage corresponds; Overview of the side connector panel
< Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. Getting started (Continued) EN 4 - To connect a camera, camcorder or game, see To make video and audio connections, p. 44. - To connect a headphone, see To make video and audio connections, p. 44. - To connect a USB...
Page 5 - Standby; TV; Colour keys; OPTION; Cursor keys; OK; Volume; : the TV is never powered off completely unless; Attention; : not all channels transmit interactive television
B Standby Press to switch the TV from or to standby mode.When switched to standby, a red indicator on the TV lights up. TV Press to select TV mode. DVD STB VCR AUX Press one of these keys to set your remote control tooperate a peripheral device.See Audio and Video equipment keys, p. 54. DEMO Press t...
Page 6 - Note; : when the TV is switched to standby, and you switch
+P- Channel selection - to browse through the TV channels and sources stored and marked in the Favourite channels lists; - to select a page in Teletext mode;- to quickly browse through the lists in the menus;- to switch the TV on from standby mode. 0/9 Digit keys To select a TV channel between 0 and...
Page 7 - Use of the OPTION key; Keys at the right side of the TV
Digital audio language: See Adjust sound menu settings, p. 18. Digital subtitle language: See Adjust feature menu settings, p. 23. Subtitles: See Adjust feature menu settings, p. 23. Picture format: See Use of the TV menu settings, Adjust picture menusettings, p. 17. Equalizer: See Use of the TV men...
Page 8 - Introduction: Digital TV; Switch the TV on; First time installation
Introduction: Digital TV EN 8 Note : if the TV has already been installed before and/or you want to change the First time installation settings, proceedwith Use of the TV menu settings, p. 13. Switch the TV on < Press the power switch B at the side of the TV. > An indicator on the front of the...
Page 9 - Notes; PHILIPS
After the Welcome screen you are asked to select a language ofthe TV's on-screen menus. The text of the header and the infoon screen continuously change language. Also the digital audioand subtitle language will be set to the selected menu language. 1. Press the cursor up/down to highlight your lang...
Page 10 - : when you skip or stop the Settings Assistant, then; : any time you can change or reset your settings or; Step 3: Settings assistant: select your TV settings
By means of several split screens/full screens you areprompted to select your preferred picture, sound andambilight settings, to finally arrive at a complete settingwhich satisfies you. 1. Press the green colour key on your remote control to enter the Settings assistant menu. 2. Select your Location...
Page 11 - How to navigate through the menus; Introduction; : digital related menu items will only be accessible in case
A lot of guiding instructions, help texts and messages will bedisplayed on your TV when you use the menus or when you tryto execute an action.Read the help texts which are being displayed on the specificitem highlighted.The colour keys at the bottom of the screen refer to thedifferent actions which ...
Page 12 - How to navigate through the menus (continued); TV settings
How to navigate through the menus (continued) EN 12 4. Use the cursor up/down to select a menu item. - TV settings allows you to adjust your preferred picture, sound and ambilight settings - Features allows you to control the settings of special TV features - Installation allows you - to select your...
Page 13 - Use of the TV menu settings; Adjust viewing and listening settings
EN 13 Each time you've made a selection, press the green key toconfirm your selection. 1. Select Settings assistant and press the cursor right. > By means of several split screens/full screens you areprompted to select your preferred picture, sound andambilight settings to finally arrive at a com...
Page 14 - B. Use of the Standard settings
EN 14 Use of the TV menu settings (continued) < Select Picture , Sound or Ambilight and press the cursor right. > A menu appears which allows you to fine tune thepicture, sound and ambilight settings. > To adjust the Picture settings, see Adjust picture menusettings, p. 15. > To adjust t...
Page 15 - Adjust picture menu settings
Info TV menu TV settings Picture Contrast Brightness Colour Hue Sharpness Tint .............. Settings assistant Reset to standard Picture Sound Ambilight The picture menu contains the settings that affect the quality ofthe picture. 1. P ress the MENU/BROWSE key on the remote control. > The main ...
Page 16 - Adjust picture menu settings (Continued); WP
EN 16 Adjust picture menu settings (Continued) Custom tint (only when Tint is set to Custom) Fine tunes the white point ( WP ) and black level ( BL ) of the picture. 1. Select Custom tint and press the cursor right. 2. Use the cursor keys to select and adjust the settings of: R-WP : allows you to cu...
Page 17 - MPEG; On; : with HD sources not all picture formats will be; : this function is also accessible via the; key on
MPEG artefact reduction MPEG artefact reduction On smoothens the transitions on digital content. < Select On or Off . Colour enhancement Automatically controls green enhancement and bluestretch. It makes the colours more vivid. < Select Off , Minimum , Medium or Maximum . Active control The TV...
Page 18 - Adjust sound menu settings; Equalizer
Adjust sound menu settings The sound menu contains the settings that affect the quality ofthe sound. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3. Select TV settings and press th...
Page 19 - Surround mode
Dual I/II Allows you to select, per channel, Dual I or II, when dual sound transmission is available. Mono/Stereo Allows you to select, per TV channel, Mono or Stereo sound when stereo broadcasts are available. Surround mode Allows you to select the modes for more spatial orsurround sound reproducti...
Page 20 - Off; Brightness; Enjoy Ambilight; : in standby mode the lights can be set/operated to any
The ambilight menu contains the settings for controlling theambient lighting. Using ambient light gives a more relaxedviewing experience and improves perceived picture quality.Analysis of the picture content adapts the colours continuously.But the lights can also be set to any fixed colour and manys...
Page 22 - MODE; : only available when Custom has been selected in; Caution; : Infrared interference; Ambilight in standby mode
Custom colour Allows you to customise the ambilight colour. < Select Palette to select the general colour of the light output. < Select Saturation to adjust the colourfulness of the light. Separation Allows you to define the stereo effect in case, Relaxed,Moderate or Dynamic has been selected ...
Page 23 - Subtitle; Subtitle On; Adjust feature menu settings; Digital subtitle language
The Features menu allows you to control the settings ofspecial TV functions, features and accessory equipments. 1. Press the MENU/BROWSE key on the remote control. > The main menu appears. 2. Select TV menu and press the cursor right. > The TV Menu is moved to the left. 3. Select Features and ...
Page 24 - Adjust feature menu settings (Continued); : you can always switch off your TV earlier or select; : you have to re-enter your code each time you; Important: you have forgotten your code !; Change code; and press the cursor right.
Sleeptimer This sets a time period after which the TV automaticallyswitches to standby. 1. Select Sleeptimer . 2. Press the cursor right.3. Select a value with the cursor up/down. > The list will have values from 0 to 180 minutes. When 0is selected, the sleeptimer is switched off. Childlock With ...
Page 25 - On timer
Set code/Change code This allows you to set or change the personal 4-digit accesscode that is used in the different lock functions of the TV. < Select Set or Change code . > If no PIN-code exists yet, the menu item is set to Set code . Follow the instructions on screen. > If a PIN-code has ...
Page 26 - Common interface
EN 26 Adjust feature menu settings (Continued) Common interface This allows you to access common interface applicationsdefined by the service provider of the Common Interface(CI) module.The Common Interface (CI) module can contain one ormore applications, which are used to communicate with theCI ser...
Page 27 - How to search for and store TV channels
How to search for and store TV channels EN 27 This menu allows you to select your preferred language formenu, audio and subtitle. Menu language This allows you to select your menu language out of the listof the available languages. Preferred audio language (only with Digital TV broadcasting) This al...
Page 28 - How to search for and store TV channels (Continued); Select; Channels; Automatic installation; - if you select a wrong country, the channel numbering will not; Store TV and radio channels; - already installed channels will not be renumbered.
How to search for and store TV channels (Continued) EN 28 Info TV menu Installation Languages Country Time zone Channels Preferences Connections ............... TV settings Features Installation Info TV menu Installation Channels Autom. installation Installation update Digital: test recept.. Analogu...
Page 29 - Analogue: manual installation; Digital: test reception
EN 29 How to search for and store TV channels (Continued) Info TV menu Installation Channels Autom. installation Installation update Digital: test recept.. Analogue: manual.. Rearrange Languages Country Time zone Channels Preferences Connections Decoder ............. Analogue: manual installation Th...
Page 30 - Uninstall - reinstall; Rearrange the channel number list; - press the yellow colour key to delete all characters. The; : uninstalled channels are not reinstalled during an
This allows you to rename, to reshuffle and to uninstall orreinstall the stored channels. < Press the corresponding colour keys and follow the onscreen instructions. Reshuffle This allows you to change the order of the stored TVchannels. 1. Select the channel you want to change place.2. Press the...
Page 31 - Select your location; Shop; Display a Programme title; Yes; Set your preferences; : it may take a few seconds before teletext broadcast
This menu contains items that can set or adjust various specialTV functions and that will typically be accessed onlyoccasionally. Select your location This allows you to select the location of your TV.If you choose for Shop it will result in fixed settings of picture, sound and ambilight.The locatio...
Page 32 - Select a Decoder channel number; Digital Audio In; Select your connections; Status
Select a Decoder channel number This allows you to select the peripheral equipment you haveconnected to the audio and video connectors. 1. Select Connections . 2. Press the cursor right.3. Select the input to which the peripheral equipment is connected. > When you select EXT1 , EXT2 , EXT3 , HDMI...
Page 33 - USB device upgrade; Announcement
How to upgrade the TV software Reset the Factory settings EN 33 This allows you to upgrade your TV software using a USB device. USB device upgrade It is possible to initiate an upgrade procedure from a USBdevice before you start up the TV. The memory device mustbe filled with the appropriate upgrade...
Page 34 - Create your favourite list; To select a channel from the displayed favourite list
EN 34 This allows you to select up to four favourite channels lists withyour preferred TV channels and radio stations. For example, eachmember of your family can create his/her own favourite list.In addition to the favourite channel lists you may also select a listwith only digital TV channels or a ...
Page 35 - Create your favourite channels list (Continued); FAV
EPG (Electronic Programme Guide) (only with Digital TV channels) Create your favourite channels list (Continued) EN 35 The Electronic Programme Guide shows you detailedinformation about the current programme and also about thenext programme (only for TV programmes that provide EPGinformation). 1. Pr...
Page 37 - -Following file formats can be reproduced:; To insert a USB device; key on the remote control to; Multimedia Browser; To view content from a USB device; : if your USB device does not fit into the USB connector at; : USB devices are not supplied with this TV.
The Multimedia browser lets you display pictures or play audiofiles stored on a USB device. The Multimedia browserapplication is invoked from the main menu. -Following file formats can be reproduced: for pictures: JPEGfor audio: MP3, MP3 Pro, LPCM - Only FAT/DOS-formatted memory devices are supporte...
Page 38 - Multimedia Browser menu; file; directory; Following icons may appear:
Multimedia Browser menu 1. Insert a USB device.2. Select the USB device under Multimedia with the cursor up/down. > The Multimedia browser allows you to browse contentstored on the inserted USB device. > The 2-panel browser will be shown with the left panelcontaining the content types (Music, ...
Page 39 - : to rotate a picture or to select one of the zoom; key or
Function keys at the bottom of the screen Details to display a description of the selected file or directory Transitions to select if you like to apply a transitionduring a slide show Slide time to select the duration a picture will bedisplayed in a slide show Rotate to rotate a picture Repeat one/a...
Page 40 - Select subpages; Teletext; : Teletext is not available via equipment connected to the
Most TV channels broadcast information via teletext.This TV has a 1200 pages memory that will store mostbroadcasted pages and subpages to reduce waiting time. Aftereach programme change, the memory is refreshed. < Press b to switch the teletext on. > The main index page appears on the screen. ...
Page 41 - Language; Menu; Reveal
Teletext menu Hypertext With hypertext you can quickly jump to a pagenumber orsearch for a specific word shown on the current teletextpage. 1. Press the OK key to highlight the first word or a number on the page. 2. Use the cursor up/down, left/right to select any other word or number you want to se...
Page 42 - Text info
Teletext (Continued) EN 42 Some digital channels offer dedicated digital text services (forexample BBCi). 1. Press b to switch Digital text on. 2. To use the digital text, follow the instructions on screen.3. Depending on the service, you may be asked to use the cursor keys, the OK key, the coloured...
Page 43 - To make video and audio connections
To make video and audio connections EN 43 L / R V H EXT3 AUDIO L / R L / R V H EXT3 AUDIO L / R S-VIDEO HDMI VIDEO 75 EUROCONNECTOR Pr Pb Y R B G AUDIO L/R V H Pr Pb Y R B G EXT3 EXT3 Tip : use the inputs that are available on your equipment that provide the best video or audio performance, as below...
Page 44 - Headphone; To make video and audio connections - Side panel overview; : do not connect cable; on the remote control to
Camera, Camcorder, Game 1. Connect your camera, camcorder or game as shown. 2. Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment alsoconnect AUDIO R 3 . S-VHS quality with an S-VHS camcorder isobtained by connecting the S-VHS cables withthe S-VIDEO input 1 and AUDIO inputs 3 ...
Page 45 - To make video and audio connections - Rear panel overview
Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 ON INTERFACE HDMI 1 HDMI 2 ANTENNA DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL 75 o o o o Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 COMMON INTERFACE HDMI 1 HDMI 2 ANTENNA DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL 75 o o o o VGA DVI ...
Page 46 - Connect a VCR or DVD recorder
Connect a VCR or DVD recorder EN 46 EXT2 EXT1 ANTENNA DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL 75 o o 1 3 EXT 1 / 2 2 CABLE RECORDER With a eurocable 1. Connect the aerial cables 1 and 2 as shown. 2. Connect the eurocable 3 as shown. 3. Make your selection of the source to which the VC...
Page 47 - Connect a satellite receiver; Connect two VCRs or VCR and DVD recorder; With eurocables
Connect a satellite receiver EXT2 EXT1 ANTENNA DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL 75 o o RECORDER CABLE 1 2 RECORDER 3 5 EXT 1/2 4 Connect two VCRs or VCR and DVD recorder EN 47 With eurocables 1. Connect the aerial cables 1 and 2 as shown. 2. Connect your VCRs or DVD-recorder to...
Page 48 - With a HDMI connector; With a DVI connector; DIGITAL
Connect a DVD player or HD receiver Connect a DVD player, HD receiver or game console EN 48 DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL o HDMI 1 HDMI 2 ANTENNA 75 o o o HDMI 1/2 HDMI Note : in case of any problems, see Annex 4: Issues referring to connected peripherals with aHDMI connecto...
Page 49 - Connect a DVD player, a satellite receiver or HD receiver; With Component Video Connectors; Pb
Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL o 2 1 DIGITAL AUDIO IN EXT3 :YPbPr 3 EXT3 :AUDIO L/R DVD Connect a DVD player, a satellite receiver or HD receiver EN 49 With Component Video Connectors 1. Connect the three separate component video cab...
Page 50 - Connect a PC; PC equipped with a DVI connector:; PC equipped with a VGA connector:; AUDIO R
Notes: - only a PC with digital sound can be connected to the HDMI connection; - if your PC does not have digital sound output, connect your PC via a VGA connector;- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 60 Hz; - supported PC monitor modes: VG...
Page 51 - Connect a Home Cinema amplifier; Digital Home Cinema amplifier; Analogue Home Cinema amplifier; AUDIO OUT L; DIGITAL AUDIO OUT
Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO o DIGITAL o DIGI AU O 1 Connect a Home Cinema amplifier EN 51 Digital Home Cinema amplifier < Connect a digital Home Cinema amplifier tothe DIGITAL AUDIO OUT connector 1 at the bottom of the TV. Analogue Home ...
Page 52 - TO; Insert a CA module; Use the Common Interface slot; : when you connect the CA module; : this functionality is only available in certain countries.
COMMON INTERFACE HDMI 1 COMMON INTERFACE HDMI 2 o o COMMON INTERFACE TO P o o To receive scrambled DTV signals you will need aCA (Conditional Access) module and a Smart cardprovided by the service provider.A CA module can enable additional services, forexample Pay TV.Contact your Common Interface se...
Page 53 - Record with your recorder; Select connected equipment; Record a TV programme
Record with your recorder Before operating your connected equipment you have to makea selection in the Installation, Select your connections menu,p. 32. 1. Press the MENU/BROWSE key. 2. Select TV menu and press the cursor right. 3. Select Installation . 4. Press the cursor right.5. Select Connection...
Page 54 - To select between Normal and Expert mode; Audio- and video equipment keys
Most of the audio and video equipment from our range ofproducts can be operated with the remote control of your TV.Press one of the keys after you pressed one of the mode keys( DVD , STB , VCR , AUX ) according to the equipment you want to operate with this remote control.See Use of the Remote contr...
Page 55 - Troubleshooting
55 EN Troubleshooting Symptom Possible cause/Remedy No picture < Verify if the supplied cables are connected properly. (The aerial cable to theTV, the other aerial to your recorder, the power cables, ..) < Verify if you selected the correct source. < Verify if the child lock has been switch...
Page 57 - Annex 1 - Philips TV software upgrade with portable memory
EN 57 57 Info TV menu Installation Software upgrade Current softw. info Local upgrades Announcement ............. Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Annex 1 - Philips TV software upgrade with portable memory Introduction Philips continuously tries to...
Page 58 - Upgrade the TV software; Operation successful
EN 58 58 Upgrade the TV software 1. Switch off your TV and remove all memory devices.2. Insert the USB portable memory that contains the downloaded software upgrade. 3. Switch on your TV with the power key B at the side of the TV. 4. The upgrade process starts automatically. After a few seconds the ...
Page 59 - Local software upgrade procedure; Software Upgrade
EN 59 59 Info TV menu Installation Software upgrade Current softw. info Local upgrades Announcement ............. Time zone Channels Preferences Connections Decoder Factory settings Software upgrade Annex 1 (Continued) Local software upgrade procedure New software, or the currently installed softwar...
Page 60 - Annex 2 - Philips TV-Slideshow Format with background music; key on the remote control after having inserted a USB device and; General Rules; files using simple tools.; General Format
Annex 2 - Philips TV-Slideshow Format with background music 60 EN Introduction This document explains how to make a Philips slideshow file with background audio.Be aware that the content of this document is addressing technical or software skilled users.To start the slideshow open the slideshow file...
Page 61 - Tag Name; title; Use
Annex 2 (Continued) 61 EN Supported XML-tags The following table gives a description of the XML syntax. Tag Name philips-slideshow title audio slide-duration slides slide Use mandatory optional optional optional mandatory optional Description Philips slideshow signature including the version. The ti...
Page 62 - Annex 3 - Philips TV - Digital camera and USB issues; Digital Camera Issues; is switched on before connecting to the TV.; USB Memory Device Issues; before you can access your files.; Digital Content Issues; selected, the other audio tracks can’t be selected.
Annex 3 - Philips TV - Digital camera and USB issues 62 EN Notes : - the latest version of this document can be found on the Philips support website (www.philips.com/support); - the software of your TV is upgradeable. If you have problems first check if you have the latest software installed on your...
Page 63 - HDMI IN; HD
Annex 4 - Issues referring to connected peripherals with a HDMI connector 63 EN The HDMI IN connector allows the following TV and monitor display modes: HD Standard Definition TV (SDTV) 640x480i720x480i720x576i Enhanced Definition TV (EDTV) 640x480p720x480p720x576p High Definition TV (HDTV) 1920x108...
Page 64 - Index
active control ........................... 17ambilight .................................... 20analogue: manual installation . 29antenna......................................... 4audio receiver .......................... 51audio equipment keys ............. 54auto format ................................
Page 65 - Recycling; The packaging of this product is intended to; Disposal of your old product; Product information; water pollution. Very low standby power consumption.; Disposal of batteries
Recycling 65 EN R The packaging of this product is intended to be recycled. Apply to the local authorities forcorrect disposal. Disposal of your old product Your product is designed and manufactured withhighly quality material and components, which canbe recycled and reused. When this crossed-out wh...