Philips 32PHH4101/88 - User Manual

2.5 Antenna cable Insert the antenna plug firmly into the ANTENNA socket at the back of the TV. You can connect your own antenna or an antennasignal from an antenna distribution system. Use anIEC Coax 75 Ohm RF antenna connector. Use this antenna connection for DVB-T and DVB-Cinput signals. 2.6 Sate...

3 Connect devices 3.1 About connections Connectivity guide Always connect a device to the TV with the highestquality connection available. Also, use good qualitycables to ensure agood transfer of picture and sound. If you need help to connect several devices to the TV,you can visit the Philips TV co...

Viera Link. Not all brands are fully compatible withEasyLink. Example HDMI CEC branding names are property oftheir respective owners. Operate devices To operate a device connected to HDMI and set upwith EasyLink, select the device - or its activity - inthe list of TV connections. Press  SOURCES , s...

3.2 Common interface - CAM CI+ This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes,like movies and sports, offered by digital TVbroadcasters in your region. These programmes arescrambled by the TV broadcaster and descrambledwith a prepaid CI+ module.Digital ...

Auto switch off Switch off this automatic timer, if you only use theremote control of the Set-top box. Do this to preventthe TV from switching off automatically after a 4 hourperiod without a key press on the remote control ofthe TV. To switch off the Switch off timer, press  and select Setup and p...

1. Press  and select Setup and press OK . 2. Select TV settings > Sound > Advanced > Audio out offset . 3. Use the slider bar to set the sound offset andpress OK . 4. Press  , repeatedly if necessary, to close the menu. Audio Out format If you have a Home Theatre System (HTS)with multicha...

3.8 Game console HDMI For best quality, connect the game console with anHigh speed HDMI cable to the TV. Best Setting Before you start playing a game from a connectedgame console, we advice you to set the TV in theideal setting Game . To set the TV to the ideal setting… 1. Press  and select Setup a...

press  (Pause). Trying to pause will start the formatting. Follow the instructions on screen. When the USB Hard Drive is formatted, leave itconnected permanently. 3.10 USB flash drive You can view photos or play your music and videosfrom a connected USB flash drive. Insert a USB flash drive in one ...

3.13 Headphones Side You can connect a set of headphonesto  connection on the TV. The connection is a mini- jack 3.5mm. You can adjust the volume of theheadphones separately. To adjust the volume . . . 1. Press  and select Setup and press OK. 2. Select TV settings > Sound > Headphone volume ...

4 Switch on 4.1 On, Standby or Off For 4100, 4200, 4101, 4111, 4201 series Before you switch on the TV, make sure you pluggedin the mains power in the POWER connector on the back of the TV. To put the TV in Standby when the indicator light isoff, press the small joystick key on the back of the TV.Th...

5 Remote control 5.1 Key overview (For 4000,4100, 4200, 4101, 4111, 4201,5210 series) Top 1.  Standby / On To switch the TV on or back to Standby. 2. Playback keys - Play  , to playback - Pause  , to pause playback - Stop  , to stop playback - Rewind  , to rewind - Fast forward  , to go fast f...

6. TEXT To open or close Text / Teletext. 5.2 IR sensor The TV can receive commands from a remote controlthat uses IR (infrared) to send commands. If you usesuch a remote control, always make sure you pointthe remote control at the infrared sensor on the frontof the TV. 5.3 Batteries 1. Slide the ba...

6 TV channels 6.1 Channel Lists About channel lists After a channel installation, all channels appear onthe channel list. Channels are shown with their nameand logo if this information is available. With a channel list selected, press thearrows  (up) or  (down) to select a channel, then press OK t...

Subtitles for analogue channels For analogue channels, you need to make thesubtitles available for each channel manually. 1. Switch to a channel and press TEXT to open Text. 2. Enter the page number for subtitles, usually 888 . 3. Press TEXT again, to close Text. If you select On in the Subtitle men...

Text setup Text language Some digital TV broadcasters have several Textlanguages available.To set your primary and secondary Text language . . . 1. Press  and select Setup and press OK . 2. Select Channel settings > Languages . 3. Select Primary Teletext or Secondary Teletext . 4. Select your pr...

7 Channel installation- Antenna, Cable 7.1 Update channels Automatic update If you receive digital channels, you can set the TV toautomatically update the list with new channels.Alternatively, you can start a channel update yourself. Automatic channel update Once a day, at 6 AM, the TV updates the c...

Symbol rate mode If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic . If you received a specific symbol rate value, select Manual . However, the value you received could be in the predefined list of symbol ...

8 TV guide 8.1 What you need With the TV guide you can view a list of the currentand scheduled TV programmes of your channels.Depending on where the TV guide information (data)is coming from, analogue and digital channels or onlydigital channels are shown. Not all channels offer TVguide information....

3. At the top of the screen, select  Scheduled and press OK . 4. In the list of scheduled recordings and reminders,select the tab Reminders and press OK to view the reminders only.5. Press the colour key  Remove to remove the selected reminder. Press the colourkey  Record to record the selected p...

9 Recording andpause TV 9.1 Recording What you need You can record a digital TV broadcast and watch itlater. To record a TV programme you need… - a connected USB Hard Drive formatted on this TV- digital TV channels installed on this TV- to receive channel information for the on screen TVGuide- a rel...

key  Adjust Time . 6. Select the start or end time and change the timewith the  (up) or  (down) keys. Select Apply and press OK . Manual Recording You can schedule a recording that is not linked to aTV programme. You set the tuner type, channel andthe start and end time yourself. To schedule a re...

10 Sources 10.1 Switch to a device In the list of connections - the Source menu - you canfind the devices connected to the TV. From thisSource menu, you can switch to a device. Sources menu To open the Sources menu, press  SOURCES . To switch to a connected device, select the devicewith the arrows ...

11 Timers and clock 11.1 Sleep timer With the sleep timer, you can set the TV to switch tostandby automatically after a preset time. To set the sleep timer . . . 1. Press  and select Setup and press OK . 2. Select TV settings > General settings > Sleep timer . With the slider bar you can set ...

12 Videos, Photos andMusic 12.1 From a USB connection You can view your photos or play your music andvideos from a connected USB flash drive or USB HardDrive. With the TV switched on, plug in a USB flash drive or aUSB Hard Drive to one of the USB connections. TheTV detects the device and will list y...

Info To view info on a photo (size, creation date, file path,etc.), select a photo and press  INFO . Press again to hide the info. Slideshow with music You can watch a slideshow of your photos and listento your music at the same time. You must start theusic before you start the photo slideshow. To ...

13 Settings 13.1 Picture Picture style Select a style For easy picture adjustment, you can select a presetPicture Style. 1. Press  and select Setup and press OK . 2. Select TV settings > Picture > Picture style , and select one of the styles in the list.3. Select a style and press OK . The av...

2. Select a format from the list and press OK . Screen edges With Screen edges , you can slightly enlarge the picture to hide distorted edges. To adjust the edges ... 1. Press  and select Setup and press OK . 2. Select TV settings > Picture > Format and edges > Screen edges . 3. Adjust the...

the volume difference is small, select Less . 5. Press  , repeatedly if necessary, to close the menu. Audio out delay With a Home Theatre System (HTS) connected to theTV, the picture on TV and the sound from the HTSshould be synchronised. Automatic audio to video sync With recent Philips Home Theat...

14 Specifications 14.1 Environmental Saving energy The Eco settings bundle the settings that help the environment.While you are watching TV channels, press  to open Eco settings . Press  again to close Eco settings . Energy saving This Picture style sets the picture, in the most idealenergy consci...

- Annual Energy Consumption (kWh) * : 82 kWh - Standby Power Consumption (W) **: 0.30 W- Off Mode Power Consumption (W) : 0.30 W- Display Resolution (Pixels) : 1920x1080p * Energy consumption kWh per year, based on thepower consumption of the television operating 4hours per day for 365 days. The act...

14.8 Multimedia Note: Multimedia file names must not exceed 128characters. Supported multimedia connections - USB (FAT / FAT 32 / NTFS): only connect USBdevices that consume 500 mA of power or less. Supported image files - JPEG: *.jpg, *.jpeg- PNG: *.png.jpg Supported audio files - MPEG1: *.mp3 Supp...

15 Software 15.1 Software update It might be necessary to update the TV software. Youneed a computer and a USB memory device toupload the software on the TV. Use a USB memorydevice with 256MB free space. Make sure that writeprotection is switched off. 1. Start the update on TV To start the software ...

16 Troubleshootingand support 16.1 Troubleshooting Channels No digital channels found during the installation See the technical specifications to make sure thatyour TV supports DVB-T or DVB-C in your country.Make sure that all cables are properly connected andthat the correct network is selected. Pr...

Make sure that Location is set to Home . Picture does not fit the screen Change to a different picture format. Press  . Picture format keeps changing with different channels Select a non 'Auto' picture format. Picture position is incorrect Picture signals from some devices may not fit thescreen cor...

frequently asked questions (FAQs). In some countries,you can chat with one of our colaborators and askyour question directly or send a question by email.You can download new TV software or the manual toread on your computer. 16.5 Consumer Care / Repair For support and repair, call the Consumer Careh...

17 Safety and care 17.1 Safety Important Read and understand all safety instructions beforeyou use the TV. If damage is caused by failure tofollow instructions, the warranty does not apply. Risk of electric shock or fire - Never expose the TV to rain or water. Never placeliquid containers, such as v...

Low temperatures If the TV is transported in temperatures below 5degrees Celsius or 41 degrees Fahrenheit, unpackthe TV and wait until the TV temperature reachesroom temperature before connecting the TV to thepower outlet. Humidity In rare occasions, depending on temperature andhumidity, minor conde...

18 Terms of use,copyrights andlicenses 18.1 Terms of use 2016 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP VisionEurope B.V. or one of its affiliates, hereinafterreferred to as TP Vision, which is the manufacturer ofthe product. TP Vision is the warrantor...

Dolby Dolby® Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks ofDolby Laboratories. MHEG software The copyright in MHEG software (the Software)comprised in this television (this product) andincluded to enable you to use interactive televisionfeatures is...