Page 3 - Contents
1 7 Connect devices 24 Back connectors for 19-22 inch TV 24 Back connectors for 26 inch and larger TV 25 Side connectors 27 Connect a computer 28 Use Philips EasyLink 29 Use a Kensington lock 29 8 Product information 30 Suppor ted display resolutions 30 Multimedia 30 Tuner/Reception/Transmission 30 ...
Page 4 - Notice
2 bright points of light (red, green or blue) may appear constantly on the screen. This is a structural proper ty of the display (within common industr y standards) and is not a malfunction. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at con...
Page 6 - Important; Safety
4 Two people are required to lif t and • carr y a T V that weighs more than 25 kg.When stand mounting the T V, use • only the supplied stand. Secure the stand to the T V tightly. Place the T V on a flat, level sur face that can suppor t the combined weight of the T V and the stand.When wall mounting ...
Page 7 - Screen care
5 When this crossed-out wheeled bin symbol is at tached to a product it means that the product is covered by the European Directive 20 02 /96/EC . Please inform yourself about the local separate collection system for electrical and electronic products.Please act according to your local rules and do ...
Page 8 - Remote control; overview; Side controls and indicators
6 Remote control 1 28 2 3 4 5 6 7 8 9 10 1314 17 19 20 18 1516 27 24 23 21 22 26 25 12 11 3 TV overview This section gives you an over view of commonly used TV controls and functions. Side controls and indicators a POWER: Switches the product on or off. The product is not powered off completely unle...
Page 10 - Switch channels; Switch channels with the channel grid; your
8 Note If you cannot locate your remote control and • want to switch on the T V from standby, press P/CH +/- or SOURCE at the side of the T V. Switch channels Press • P +/- on the remote control or P/CH +/- on the side of the T V. Enter a channel number using the • Numeric buttons . Use the channel ...
Page 11 - Use the source button
9 Adjust TV volume To increase or decrease volume Press • +/- . Press • VOLUME +/- on the side of the T V. To mute or unmute sound Press • to mute the sound. Press • again to restore the sound. Use teletext 1 Press MHEG/TELETEXT . The main index page appears. » 2 Select a page as follows: Press the ...
Page 12 - Use more of; Access TV menus
10 Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 Press ( Home ). 2 Press to select a device to remove. 3 Press OPTIONS . The » [Remove device] list appears. 4 Press OK and select [Remove] to remove the device. The selected device is r...
Page 13 - Change picture format; Summary of picture formats; Manually adjust picture settings
11 • [Dynamic contrast] Automatically enhances contrast in an image. A [Medium] set ting is recommended. • [Dynamic backlight] Adjusts the brightness of the T V backlight to match lighting conditions. • [Colour enhancement] Makes colours more vivid and improves the resolution of details in bright co...
Page 14 - Use smart sound; Adjust sound settings
12 Use smart sound Use smar t sound to apply pre-defined sound set tings. 1 Press SOUND . The » [Smart sound] menu appears. 2 Press to select one of the following smar t sound set tings.• [Standard] Adjusts sound set tings to suit most environments and types of audio. • [News] Applies sound set tings...
Page 15 - Select teletext subpages; Access the teletext options menu
13 • [Language] Switches to a different language group to display a language correctly when that language uses a different character set. 4 Press OK to confirm your choice. 5 Press MHEG/TELETEXT to exit the teletex t options menu. Select teletext subpages A teletex t page can hold several subpages. S...
Page 16 - Select a favourite list; Add a channel to a favourite list
14 The channel options menu appears. » 4 Press to select [Mark as favourite] . 5 Press OK . The favourite lists appear. » 6 Press to select a favourite list to add the channel to. 7 Press OK . The channel is added to the favourite » list. Tip When watching T V, press • OPTIONS > [Mark as favourit...
Page 17 - Use TV lock; Set or change the TV lock code; Use timers
15 8 Press to select [Programme no.] and set the channel. 9 Press OK to confirm. 10 Press ( Home ) to exit. Tip Selec t • [On timer] > [Activate] > [Off ] to disable [On timer] . When • [On timer] is [Off ] , only [Activate] can be selec ted. Set the T V clock before ac tivating • [On timer] fe...
Page 18 - Use the TV clock; Set the TV clock; Use Scenea; Display a single picture with Scenea; Lock or unlock the TV; Lock or unlock one or more channels
16 5 For each selection, press OK to lock or unlock the channel. Note Restar t the T V for the change to take ef fec t. • Use the TV clock You can display a clock on the TV screen. Set the TV clock 1 Press ( Home ). 2 Select [Setup] > [Features] > [Clock] The » [Clock] menu appears. 3 Press or...
Page 19 - Watch TV in dual view; Personalize the Scenea picture
17 3 Press any key except ( Standby-On ) or PICTURE to return to normal T V viewing. Use sleeptimer with Scenea wallpaper By default, your T V displays the Scenea picture or slideshow for 120 minutes before entering standby mode. If sleeptimer is enabled, the Scenea picture or slideshow is displayed...
Page 20 - View photos; View a slide show of your photos
18 View photos 1 In the USB content browser, select [Picture] and press to enter. 2 Press GUIDE to switch between thumbnail and file browsing views. 3 Press to select a photo or a photo album. 4 Press OK to view the selected photo in full screen mode. Tip When in full screen mode, press • to move bet...
Page 21 - Update the TV software; Check the current software version; Change TV preferences; Listen to music
19 Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/suppor t for availability. Check the current software version 1 Press ( Home ). 2 Press to select [Setup] > [Software upd...
Page 22 - Access decoder channel; Set decoder channel; Start a TV demo
20 Reset the TV to factory settings You can restore the default picture and sound settings of your TV. Channel installation settings remain the same. 1 Press ( Home ). 2 Select [Setup] > [Installation] > [Factory settings] . 3 Press OK or to enter the [Factory settings] menu. » [Reset] is high...
Page 23 - Step 2 Install Channels; Install; Automatically install channels; Step 1 Select your menu language
21 Step 2 Install Channels Select your countr y for proper channel installation. 1 Press ( Home ). 2 Press to select [Setup] > [Installation] > [Channel install.] > [Channel assistant] . 3 Press to select your countr y and then to go to the nex t step. 4 Select [Start] and press OK to re-in...
Page 24 - Step 3 Fine-tune analogue channels; Manually install channels; Step 1 Select your system
22 2 Press to select [Setup] > [Installation] > [Channel install.] > [Analogue: Manual] . The » [Analogue: Manual] menu appears. 3 Press to select and enter [System] . 4 Press to select your countr y or region. 5 Press OK to confirm. 6 Press ( Home ) to exit. Step 2 Search and store new TV c...
Page 25 - Rearrange channels; Step 4 Skip channels; Rename channels
23 3 Press OPTIONS . The channel options menu appears. » 4 Press to select and enter [Rename chan.] . A text input box appears. » 5 Press to select characters. 6 Press OK to confirm each of the characters. Tip Rename channels - the leng th of the name is • limited to six char ac ter s.Use • [Aa] to c...
Page 26 - Connect
24 a PC IN ( VGA and AUDIO IN) Audio and video input from a computer. b HDMI 1 Digital audio and video input from high-definition digital devices such as Blu-ray players. c SERV. U For use by ser vice personnel only. d SPDIF OUT Digital audio output to home theatres and other digital audio systems. V...
Page 29 - Side connectors
27 a USB Data input from USB storage devices. b Stereo audio output to headphones or earphones. c AUDIO L /R Audio input from analogue devices connected to VIDEO . d VIDEO Composite video input from analogue devices such as VCRs. g SERV. U For use by ser vice personnel only. Side connectors 1 2 6 3 ...
Page 30 - Connect a computer
28 • HDMI cable • DVI-HDMI cable • HDMI cable and HDMI-DVI adaptor DVI LEFT / RIGHT HDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger For TV of size 22 inch and smaller HDMI 2/ DVI / HDMI 2 VGA DVI / HDMI 2 LEFT / RIGHTHDMI 1/ DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch an...
Page 31 - Use one-touch standby; Use a Kensington lock; Use Philips EasyLink; Enable or disable EasyLink
29 Use one-touch standby 1 Press and hold Standby on the T V ’s or device’s remote control for at least three seconds. The TV and all connected HDMI » devices switch to standby. Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington loc...
Page 32 - Supported TV mounts; Product; Supported display resolutions; Multimedia
30 Note Multimedia file names must not exceed 32 • char ac ter s. Tuner/Reception/Transmission Aerial input: 75ohm coaxial (IEC75) • T V system: PAL I, B/G , D/K; SECAM B/G , • D/K , L /L’ Video playback : NTSC , SECAM, PAL • Tuner Bands: Hyperband, S -channel, UHF, • VHF Remote control Type: PF02E09...
Page 34 - Troubleshooting; General TV issues
32 TV channel issues Previously installed channels do not appear in the channel list: Check that the correct channel list is • selected. No digital channels were found during the installation: Check that the T V suppor ts DVB -T or • DVB -C in your countr y. See the listed countries on the back of t...
Page 35 - Computer connection issues; Contact us; Sound issues; HDMI connection issues
33 If a HDMI-to-DVI adaptor or HDMI to • DVI cable is used, check that an additional audio cable is connected to AUDIO L /R or AUDIO IN (mini-jack only). Computer connection issues The computer display on the TV is not stable: Check that a suppor ted resolution and • refresh rate is selected on the ...
