Page 2 - Contents
EN 2 1 Get started 3 Important 3 Enjoy HD TV 6 Wall mount the TV 6 Product highlights 7 Access more information 8 2 Use your TV 9 Overview 9 Side controls and indicators 9 Remote control 9 Basic TV menus 11 Watch TV 13 Watch a connected device 15 3 Use more of your TV 16 Use teletext 16 Favourite ch...
Page 3 - Get started; Important; Congratulations; Safety; Risk of electric shock or fire!
EN 3 En gl is h 1 Get started Important Congratulations NonPu bl i sh Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your TV at (http://www.philips.com/welcome). Safety NonPu bl i sh Read and understand all instructions befor...
Page 4 - Risk of injury, fire or power cord damage!; Screen care; Unplug the TV before cleaning.; End of use
EN 4 Risk of injury, fire or power cord damage! Never place the TV or any objects on the power cord. To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times. When you disconnect the power cord, always pull the plug, never th...
Page 5 - Green eco
EN 5 En gl is h Green eco NonPu bl i sh This TV has been awarded the European Union Ecolabel for its environmental qualities. A TV that is awarded the Ecolabel includes the following green eco features that contribute to energy-efficient use: Adjustable green eco settings Access green eco settings w...
Page 6 - Use a Kensington lock; Enjoy HD TV; Full HD content; Position the TV; Before positioning the TV, read all; Wall mount the TV
EN 6 Use a Kensington lock NonPu bl i sh Your TV is equipped with a Kensington security slot on the bottom of the TV. Purchase a Kensington anti-theft lock (not supplied) to secure the TV. Enjoy HD TV Full HD content NonPu bl i sh This TV can display full High-Definition (HD) video content. To enjoy...
Page 7 - For 32 inch and 40 inch TVs; Product highlights; Full HD LCD display
EN 7 En gl is h Before you wall mount the TV, make a note of the correct length of the screw. You can determine the length of the screw by adding the thickness of your wall mount to the screw length shown in the graphic. For 32 inch and 40 inch TVs Before you wall mount the TV, make a note of the co...
Page 8 - Digital TV; EPG; Access more information; On the Internet
EN 8 The LED backlight * of the display offers exceptional picture contrast with exceptional energy saving. *Note: Certain models are equipped with an EEFL backlight display only. For detailed product information, go to (http://www.philips.com/support). To enjoy HD content, you must connect to an HD...
Page 9 - Use your TV; Home; Remote control; Overview; : Switches the TV to standby
EN 9 En gl is h 2 Use your TV Overview This section gives you an overview of commonly used TV controls and functions. Side controls and indicators NonPu bl i sh 1. 1. +/- : Increases or decreases volume. In the home menu, these buttons allow you to move horizontally. 2. ( Home ): Accesses the home m...
Page 10 - Batteries
EN 10 7. ( Experience ): Accesses the experience bar menu. 8. (Options) : Accesses options for the current activity or selection. 9.+/- ( Volume ) and ( Mute ): Increases or decreases volume; mutes or restores audio. 10.Colour buttons : Selects tasks or options. 11.0-9 ( Numeric buttons ): Selects a...
Page 11 - Usage; On-screen remote control; Basic TV menus; Browse
EN 11 En gl is h Usage NonPu bl i sh When using the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. The following illustration is an example only...
Page 12 - Experience; Add your devices; Setup
EN 12 To access the browse menu, while watching TV, press . 1. Press the Navigation buttons to select an item: [Programme guide] : Accesses the Electronic Programme Guide. [Channel list] : Accesses the TV channel list. [Text] : Accesses teletext. 2. Press OK to confirm your choice. Experience ...
Page 13 - Options; Watch TV; Switch on/off or to standby
EN 13 En gl is h Options NonPu bl i sh Option menus offer convenient settings related to what is on-screen. 1. Press to see what options are available. 2. To exit, press again. Watch TV Switch on/off or to standby To switch on If the front LED indicator is off, press the power switch ( 1 ) on the ...
Page 14 - Adjust volume; Use Smart picture settings; Use Smart sound settings; Change picture format
EN 14 Adjust volume NonPu bl i sh To increase or decrease volume Press +/- on the remote control. Press +/- on the side of the TV. NonPu bl i sh To mute or unmute sound Press to mute the sound. Press again to restore the sound. Use the [Sound] menu to adjust headphone volume. For more inform...
Page 15 - Watch a connected device; Add new device; HDMI ARC; Watch connected device; OK
EN 15 En gl is h [Auto zoom] : Enlarges the picture to fill the screen. Recommended for minimal screen distortion but not for HD or PC. [Super zoom] : Removes the black bars on the sides of 4:3 broadcasts. Not recommended for HD or PC. [Movie expand 16:9] : Scales the classic 4:3 format to 16:...
Page 16 - Use more of; Use teletext
EN 16 3 Use more of your TV Use teletext Select a page NonPu bl i sh 1. Press . 2. Select [Text] , then press OK . 3. Select a page by: Entering the page number with the Numeric buttons . Pressing or to view the next or previous page. Pressing the Colour buttons to select a colour coded item. ...
Page 17 - Favourite channels
EN 17 En gl is h To switch Teletext 2.5 on or off 1. Press . 2. Select [Setup] > [Advanced TV settings] > [Preferences] > [Text 2.5] > [On] or [Off] , then press OK . Favourite channels Add or remove channels NonPu bl i sh 1. Press . 2. Select [Channel list:] , then press OK . 3. Press ....
Page 18 - Use subtitles
EN 18 Child lock NonPu bl i sh You can prevent your children watching TV by locking the TV. Set or change the child lock code 1. Press . 2. Select [Setup] > [Advanced channel settings] or [Advanced satellite settings] > [Child lock] > [Set code] or [Change code] . 3. Enter the code with the...
Page 19 - Listen to digital radio; Use Scenea; Activate Scenea; Set a picture as Scenea
EN 19 En gl is h 1. Press . 2. Select [Browse USB] , then press OK . View slideshow Press the Navigation buttons to select a picture, then press OK . To pause or stop playback, press OK again. To jump to the previous or next file, press or . Press to exit content browser. Press to access or ...
Page 20 - Universal access; Enable universal access; Hearing impaired; Visually impaired
EN 20 1. Connect the USB storage device to the TV. 2. Press . 3. Select [Browse USB] , then press OK . 4. Select a picture, then press . 5. Select [Set as Scenea] , then press OK . 6. Select [Yes] , then press OK . 7. Press any key to exit Scenea. Universal access Enable universal access NonPu bl i ...
Page 21 - Set up the TV; Change picture and sound; Settings assistant; [Personalise picture and; Smart picture settings; More picture settings; Smart sound settings
EN 21 En gl is h 4 Set up the TV Change picture and sound settings Settings assistant NonPu bl i sh Use the settings assistant to guide you through the picture and sound settings. 1. While watching TV, press . 2. Select [Setup] > [Personalise picture and sound] , then press OK . 3. Select [Start]...
Page 22 - More sound settings; Reset to factory settings; Start a TV demo; Change channel settings; Reorder channels; Rename channels
EN 22 [Personal] : Sets the TV to your personal preferences set in the [Sound] menus in [Setup] . [Standard] : Adjusts sound settings to suit most environments and types of audio. [News] : Applies sound settings ideally suited for spoken audio, such as the news. [Movie] : Applies sound setti...
Page 23 - Hide or unhide channels; Update channel list; Other options; Install channels; Automatic install
EN 23 En gl is h 7. Press OK to confirm your choice. 8. Press to exit. Hide or unhide channels NonPu bl i sh Hide channels Hide channels from the channel list, to prevent unauthorised access. 1. While watching TV, press . 2. Select [Channel list] , then press OK . 3. In the channel list, select the ...
Page 24 - Install analogue channels; Install digital channels; Install satellite channels
EN 24 When digital TV channels are found, the list of installed channels may display empty channel numbers. You can rename, reorder or uninstall these channels. Access DVB-C or DVB-T channels If you have installed both DVB-C and DVB-T channels, you have to switch to the respective network to watch...
Page 25 - Fine-tune analogue channels; Change language settings; Menu language; Change other settings; Green eco settings; Audio lip sync
EN 25 En gl is h Fine-tune analogue channels NonPu bl i sh If the reception of an analogue TV channel is poor, try fine tuning the TV channel. 1. Press . 2. Select [Setup] > [Channel settings] > [Channel installation] > [Analogue: Manual installation] > [Fine tune] , and then press OK . ...
Page 26 - TV clock; TV location; Update the TV software; Check software version; Update with USB
EN 26 TV clock NonPu bl i sh You can display a clock on the TV screen. The clock displays the current time using time data received from your TV service operator. Display the TV clock 1. When watching TV, press . 2. Select [Status] , then press OK . The clock is displayed on the bottom right-hand co...
Page 27 - Update with digital broadcast; Reinstall the TV
EN 27 En gl is h Update with digital broadcast NonPu bl i sh If available, your TV can receive software updates via digital broadcasts. If an update is available, a message appears prompting you to update the software. We strongly recommend that you update the software when prompted. Reinstall the T...
Page 28 - Connect the TV; First connections; Power; Antenna; the antenna cable into the; About cables; If your device only has composite/RCA
EN 28 5 Connect the TV First connections Power NonPu bl i sh Be sure that the power plug in the wall socket is accessible at all times. When disconnecting the power cable, always pull the plug, never the cable. Although this TV has a very low standby power consumption, switch off the TV using the po...
Page 29 - To add a new device, press , then select; HDMI; The; Y Pb Pr
EN 29 En gl is h To add a new device, press , then select [Add your devices] . Follow the on-screen instructions. HDMI NonPu bl i sh An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use HDMI for High-Definition (HD) TV signals and to enabl...
Page 30 - TV connectors overview; Rear; : For use by service personnel; Bottom; SCART
EN 30 TV connectors overview Rear NonPu bl i sh 1.SERV. U : For use by service personnel only. 2.EXT 2 / EXT 3Component (YPbPr) : Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. 3. : Stereo audio output to headphones or earphones. Available on ce...
Page 31 - : In addition to normal HDMI; Side; : Digital audio and video input from; Connect devices
EN 31 En gl is h 4.HDMI ARC : In addition to normal HDMI functionality, outputs TV audio to an HDMI ARC-compliant device, such as a home theatre system. 5.AUDIO IN : Audio input from a computer. 6. ANTENNA : Signal input from an antenna, cable or satellite. 7. VGA : Video input from a computer. Side...
Page 32 - DVD player
EN 32 DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the back of the TV. DVD-Recorder First, use two antenna cables to connect the antenna to the DVD Recorder and the TV. (SAT is available on certain models only) Finally, use a SCART cable to connect the DVD Recorder ...
Page 33 - Home Theatre System; First, use an HDMI cable to connect the device to the TV.
EN 33 En gl is h Home Theatre System First, use an HDMI cable to connect the device to the TV. Finally, use a digital audio cinch cable to connect the device to the TV. (not required for HDMI ARC) Audio and video synchronisation (sync) If the sound does not match with the video on screen, you can se...
Page 35 - Then use a SCART cable to connect the digital receiver to the TV.
EN 35 En gl is h Then use a SCART cable to connect the digital receiver to the TV. Finally, use two SCART cables to connect the two devices and the TV. Dig. receiver, DVD-R and HTS First, use three antenna cables to connect the two devices and the TV. Downloaded From TV-Manual.com Manuals
Page 36 - Then use an HDMI cable to connect the Home Theatre System to the TV.
EN 36 Then use two SCART cables to connect the digital receiver to the DVD Recorder and the DVD Recorder to the TV. Then use an HDMI cable to connect the Home Theatre System to the TV. Finally, use a digital audio cinch cable to connect the Home Theatre System to the TV. Downloaded From TV-Manual.co...
Page 37 - Use an HDMI cable to connect the Digital HD receiver to the TV.; Connect more devices; Game console; Enable game mode
EN 37 En gl is h Dig. HD receiver First, use two antenna cables to connect the Digital HD receiver to the TV. Use an HDMI cable to connect the Digital HD receiver to the TV. Connect more devices Game console The most practical connections for a game console are at the side of the TV. However, more c...
Page 39 - Channel decoder; , then the location of the
EN 39 En gl is h Dig. camcorder The most practical connection for a camcorder is at the side of the TV. If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to connect the camcorder to the back of the TV. (On certain models, EXT2 is labelled EXT3). Channel decode...
Page 40 - PC; Connect a computer using one of the following cables:
EN 40 PC NonPu bl i sh Connect a computer using one of the following cables: HDMI cable DVI-HDMI cable HDMI cable and HDMI-DVI adaptor Downloaded From TV-Manual.com Manuals
Page 41 - Use Philips EasyLink; Enable or disable EasyLink; HDMI-CEC functionality is known by; EasyLink features
EN 41 En gl is h VGA cable Use Philips EasyLink Enable or disable EasyLink NonPu bl i sh Philips EasyLink provides several features that enable you to control devices that are connected via HDMI. Connected devices must support the HDMI-CEC standard, and must be properly configured for EasyLink to wo...
Page 42 - Enable or disable EasyLink Remote Control; EasyLink buttons; Configure TV speakers
EN 42 To enable Pixel Plus Link 1. Press . 2. Select [Setup] > [Advanced TV settings] > [EasyLink] > [Pixel Plus link] > [On] . 3. Press OK to activate. Auto subtitle shift Auto subtitle shift displays subtitles from Philips EasyLink compliant Home Theatre Systems over the video image on...
Page 43 - Use HDMI ARC
EN 43 En gl is h Configure TV speakers 1. Press . 2. Select [Setup] > [Advanced TV settings] > [EasyLink] > [TV speakers] . 3. Select one of the following options, then press OK : [Off] : Turn off TV speakers. [On] : Turn on TV speakers. [EasyLink] : TV audio continues to be streamed ...
Page 45 - Enable or disable HDMI ARC; Use a CAM; Insert and activate a CAM; Be sure to follow the instructions; Access CAM services
EN 45 En gl is h HDMI ARC allows you to use Philips EasyLink to output TV audio directly to a connected audio device, without the need for an additional digital audio cable. Be sure that the device is HDMI-CEC and ARC compliant, and that the TV is connected to the device using an HDMI cable attached...
Page 46 - Troubleshooting; Contact us; Check that the; TV channel issues
EN 46 6 Troubleshooting Contact us If you cannot resolve your problem, refer to the FAQs for this TV at (http://www.philips.com/support). If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the leaflet accompanying your product. Make a note of your TV model ...
Page 47 - The TV did not save your picture settings:; Sound issues; There are problems with HDMI devices:
EN 47 En gl is h There is poor TV reception from an antenna connection: Check that the antenna is properly connected to the TV. Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception qu...
Page 48 - You cannot use EasyLink features:; USB connection issues; USB device content is not displayed:; PC connection issues; Set the TV picture format to unscaled.
EN 48 You cannot use EasyLink features: Check that your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible. If an HDMI-CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is mut...
Page 49 - Technical data; Power and reception; Ambient temperature: 5°C to 35°C; Display and sound; Pixel Plus HD picture enhancement; Display resolutions; Multimedia
EN 49 En gl is h 7 Technical data Overview NonPu bl i sh Product information is subject to change without notice. For detailed product information, go to (http://www.philips.com/support). Power and reception NonPu bl i sh Power Mains power: AC220-240 V; 50-60 Hz Ambient temperature: 5°C to 35°C ...
Page 50 - Connectivity; Dimensions and weights are
EN 50 Supported video and audio files AVI video (*.avi): MPEG-4 SP, MPEG-4 ASP, MPEG-4 Part 2 AVI audio (*.avi): AC3, MPEG-1 L3, MPEG L2, AAC_ADTS, AAC_ISO MPEG video (*.mpg, *.mpeg, *.vob, *.ts): MPEG-1, MPEG-2 MPEG audio (*.mp2, *.mp3, *.mpg, *.mpeg, *.vob): MPEG-1 Layer 2, MPEG-2 Layer 2,...
Page 52 - Index; bottom connectors - 29
EN 52 8 Index A age rating - 17 audio language - 24 audio lip sync - 25 B bottom connectors - 29 C CAM, enable - 40 CAM, insert - 40 care - 5 channel list - 12 channels, favourites - 17 channels, fine tune (analogue) - 24 channels, fine tune (digital) - 23 channels, hide or unhide - 22 channels, ins...
