Page 3 - Contents
1 8 Product information 25 Suppor ted display resolutions 25 Tuner/Reception/Transmission 25 Remote control 25 Power 25 Suppor ted TV mounts 25 9 Troubleshooting 26 General TV issues 26 TV channel issues 26 Picture issues 26 Sound issues 27 HDMI connection issues 27 Computer connection issues 27 Con...
Page 4 - Notice
2 bright points of light (red, green or blue) may appear constantly on the screen. This is a structural proper ty of the display (within common industr y standards) and is not a malfunction. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at con...
Page 6 - Important; Safety
4 Avoid force coming onto power • plugs. Loose power plugs can cause arcing or fi re. Risk of injur y or damage to the T V! • Two people are required to lift and • carr y a T V that weighs more than 25 kg. When stand mounting the T V, use • only the supplied stand. Secure the stand to the T V tightl...
Page 7 - Recycling; Screen care
5 Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheeled bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your produ...
Page 8 - Remote control; Your; TV overview; Side controls and indicators
6 Remote control 1 22 45 7 6 1011 12 13 14 89 23 21 18 17 16 15 20 19 3 Your TV Congratulations on your purchase, and welcome to Philips! To fully bene fi t from the suppor t that Philips offers, register your product at www.philips.com/welcome. TV overview This section gives you an over view of com...
Page 10 - Switch channels; Use your; Switch your TV on/off or to
8 Note • Though your T V consumes ver y lit tle power when in standby, energy continues to be consumed. When not in use for an ex tended period of time, disconnect the T V power cord from the power outlet. Switch channels Press • P +/- on the remote control or P/CH +/- on the side of the T V. Enter ...
Page 11 - Use the source button; Adjust TV volume
9 Press • to mute the sound. Press • again to restore the sound. Use teletext 1 Press MHEG/TELETEXT . The main index page appears. È 2 Select a page as follows: Press the • Numeric buttons to enter a page number Press • P +/- or to view the nex t or previous page Press the • Colour buttons to select...
Page 12 - Use smart picture; Use more of; Access TV menus
10 Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-de fi ned settings or change settings manually. Use smart picture Use smar t picture to apply pre-de fi ned picture settings. 1 Press PICTURE . The È [Smart picture] menu appears. 2 Pre...
Page 13 - Change picture format; Summary of picture formats
11 Change picture format 1 Press FORMAT . A picture format bar appears. È 2 Press to select a picture format. The selected picture format is È activated. 3 Press OK to con fi rm your choice. Summary of picture formats The following picture settings can be con fi gured. Note Depending on the format o...
Page 14 - Use smart sound; Adjust sound settings
12 Use smart sound Use smar t sound to apply pre-de fi ned sound settings. 1 Press SOUND . The È [Smart sound] menu appears. 2 Press to select one of the following smar t sound settings. • [Standard] Adjusts sound settings to suit most environments and types of audio. • [NEWS] Applies sound settings...
Page 15 - Select a favourite list; Use advanced teletext; Access the teletext options menu
13 The subpage appears. È 4 Press to switch between subpages. Select T.O.P. teletext broadcasts Table Of Pages (T.O.P.) teletex t broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletex t is not broadcast on all T V channels. 1 Press MHEG/TELETEXT . The te...
Page 16 - Use timers; View all channels; Add a channel to a favourite list
14 Remove a channel from a favourite list Note Select the favourite list to edit, before removing a • channel . 1 When watching T V, press OK to display the channel grid. 2 Press OPTIONS . The channel options menu appears. È 3 Press OK to enter [Show favourite ch.] . 4 Press to select a favourite li...
Page 17 - Set or change the TV lock code
15 Use child control and rating locks You can prevent your children from watching cer tain programmes or cer tain channels by locking the TV controls and by using ratings. Set or change the TV lock code 1 Press MENU . 2 Press to select [Features] > [Set code] . 3 Press to enter the code setup. 4 ...
Page 18 - Set decoder channel; Lock or unlock one or more channels; Use the TV clock; Set the TV clock
16 3 Press or Numeric buttons to enter time. 4 Press [Done] to con fi rm. 5 Press MENU to exit. Change TV preferences 1 Press MENU . 2 Select [Installation] > [Preferences] . 3 Press to enter [Preferences] . • [Location] Optimises T V settings for your location - home or shop. • [Volume bar] Disp...
Page 19 - Start a TV demo
17 Reset the TV to factory settings You can restore the default picture and sound settings of your TV. Channel installation settings remain the same. 1 Press MENU . 2 Select [Installation] > [Factory settings] . 3 Press to enter the [Factory settings] menu. È [Reset] is highlighted. 4 Press OK to...
Page 20 - Step 2 Install Channels; Install channels; Automatically install channels; Step 1 Select your menu language
18 Step 2 Install Channels Select your countr y for proper channel installation. 1 Press MENU . 2 Select [Installation] > [Channel install.] > [Channel assistant] . 3 Press to select your countr y. 4 Press to nex t step. 5 Select [Start] and press OK to re-install channels. As the system searc...
Page 21 - Fine tune analogue channels; Manually install channels; Step 1 Select your system
19 4 Press to select your countr y or region. 5 Press OK to con fi rm. 6 Press MENU to exit. Step 2 Search and store new TV channels 1 Press MENU . 2 Select [Installation] > [Channel install.] > [Analogue: Manual] . The È [Analogue: Manual] menu appears. 3 Press to select and enter [Search] . ...
Page 22 - Rename channels; Rearrange channels
20 Rename channels Channels can be renamed so that a name of your choice appears whenever the channel is selected. 1 When watching T V, press OK to display the channel grid . 2 Select the channel you want to rename. 3 Press OPTIONS . The channel options menu appears. È 4 Press to select and enter [R...
Page 23 - Back connector for TV 26; Connect devices; Back connector for 19-22
21 d AV OUT ( VIDEO OUT and AUDIO OUT L/R ) Audio and video output to analogue devices such as another T V or a recording device. e EXT 1 ( RGB and CVBS ) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. f EXT 2 ( Y Pb Pr and AUDIO L/R ) Analogue ...
Page 24 - Connect a computer; Side connector
22 c HDMI (For TV 26 inch and larger) Digital audio and video input from high-de fi nition digital devices such as Blu-ray players. Connect a computer Before you connect a computer to the TV Set the screen refresh rate on your • computer to 60Hz. Select a suppor ted screen resolution on • your compu...
Page 25 - Enable or disable EasyLink; Use one-touch play; Use Philips EasyLink
23 Enable or disable EasyLink Note Do not enable Philips EasyLink if you do not intend • to use it. 1 Press MENU . 2 Select [Installation] > [Preferences] > [EasyLink] . 3 Select [On] or [Off ] . Use one-touch play 1 After enabling EasyLink, press play on your device. The TV automatically swit...
Page 26 - Use a Kensington lock
24 Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. EN Downloaded From TV-Manual.com Manuals
Page 27 - Supported TV mounts; Product; Supported display resolutions
25 Remote control Type: PF01E09B • Batteries: 2 x A A A (LR03 type) • Power Mains power: 220-240V, 50Hz • Standby power: < 0.3W • Ambient temperature: 5 to 40 degrees • Celsius Supported TV mounts To mount the TV, purchase a suitable VESA-compatible TV mount and mounting bolts. For easy access to...
Page 28 - Troubleshooting; General TV issues
26 TV channel issues Previously installed channels do not appear in the channel list: Check that the correct channel list is • selected. Picture issues The TV is on, but there is no picture: Check that the antenna is properly • connected to the T V. Check that the correct device is selected • as the...
Page 29 - Computer connection issues; Contact us; Sound issues; HDMI connection issues
27 Computer connection issues The computer display on the TV is not stable: Check that a suppor ted resolution and • refresh rate is selected on the computer. Set the T V picture format to unscaled. • Contact us If you cannot resolve your problem, refer to the FAQs for this T V at www.philips.com/su...
Page 30 - 0 Index
28 EasyLink disable 23 enable 23 one-touch play 23 one-touch standby 23 Environmental care 5 F Factory settings 17 Favourite list select 13 set up 13 H HDMI cable troubleshooting 27 Home mode 16 I Installation automatic 18 manual 19 K Kensington lock 24 L Language troubleshooting 26 Location 16 Lock...
