Page 2 - Table of Contents; Safety precautions and
Table of Contents 1. Important ....................................... 1 1.1 Safety precautions and maintenance .................................. 1 1.2 Notational Descriptions ............. 31.3 Disposal of product and packing material ........................................... 4 2. Setting up the...
Page 3 - Warnings
1 1. Important 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user's manual before you use your monitor. It contains important information and notes regarding the operation of your monitor. The Philips guarantee applies provided ...
Page 4 - Maintenance
2 1. Important • Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two ...
Page 5 - Notational Descriptions; Notes, Cautions and Warnings
3 1. Important “after-imaging” or “ghost imag-ing” will disappear gradually over a period of time after the power has been switched off. Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that...
Page 7 - Setting up the monitor; monitor; Package contents; Start; Power; Start
5 2. Setting up the monitor 2. Setting up the monitor 2.1 Installation Package contents 321E1SC: * VGA * HDMI Power Register your product and get support at www.philips.com/welcome Quick Start E Line 321E1 322E1C/325E1C: Power * DP * HDMI * VGA Register your product and get support at www.philips.co...
Page 8 - Install base stand
6 2. Setting up the monitor Install base stand 321E1SC 1. In order to well protect this monitor and avoid scratching or damaging of the monitor, keep the monitor face down in the cushion for the base installation. 2. Hold the base stand with both hands and firmly insert the base stand into the base ...
Page 9 - Connecting to your PC
7 2. Setting up the monitor curved design, when you pull out the styrofoam, do not squeeze the panel to avoid broken panel. 1 2 Warning: This product is curve design, when attach / detach the base, place the protective material under the monitor and do not press down the monitor to avoid the damage....
Page 10 - AC power input; Operating the monitor; Description of the control buttons
8 2. Setting up the monitor 328E1C 1 7 4 3 5 2 6 AC power input HDMI 1 input HDMI 2 input DisplayPort input Audio input 6 Earphone jack 7 Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Con...
Page 11 - Description of the On Screen Display
9 2. Setting up the monitor 328E1C 7 6 2 5 4 3 1 Switch monitor’s power ON and OFF . Access the OSD menu. Confirm the OSD adjustment.Adjust the OSD menu. Adjust the Volume. Change the signal input source. Return to previous OSD level. SmartImage. There are multiple selections: FPS, Racing, RTS, Game...
Page 12 - The OSD Menu
10 2. Setting up the monitor The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. 321E1SC Main menu Sub menu Picture OSD Settings Setup Language Color Input Picture F...
Page 13 - Resolution notification
11 2. Setting up the monitor 328E1C Main menu Sub menu Picture OSD Settings Setup Language Color Input BrightnessContrast HorizontalVertical Transparency OSD Time Out Resolution Notification Reset Information English, Deutsch, Español, Ελληνική, Français, Italiano, Magyar ， Nederlands, Português, Po...
Page 14 - Warning; Remove the Base Assembly; Place the display face down on a
12 2. Setting up the monitor 322E1C/325E1C/328E1C 20° -5° Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees. • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel. 2.3 Remove th...
Page 15 - Remove the hinge cover from
13 2. Setting up the monitor 3. Remove the hinge cover from monitor body by using your fingers. 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Al...
Page 16 - Use a screwdriver to remove the
14 2. Setting up the monitor 4. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm ...
Page 17 - Image Optimization; contents
15 3. Image Optimization 3. Image Optimization 3.1 SmartImage What is it? SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images o...
Page 18 - SmartUniformity
16 3. Image Optimization • Racing: For playing Racing games. Provides fastest response time and high color saturation. • RTS: For playing RTS (Real Time Strategy) games, a user-selected portion can be highlighted for RTS games (through SmartFrame). The picture quality can be adjusted for the highlig...
Page 21 - Adaptive Sync; Operating system
19 5. Adaptive Sync 5. Adaptive Sync (328E1C) Adaptive Sync PC gaming has long been an imperfect experience because GPUs and monitors update at different rates. Sometimes a GPU can render many new pictures during a single update of the monitor, and the monitor will show pieces of each picture as a s...
Page 22 - Technical Specifications
20 6. Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type VA Backlight W-LED system Panel Size 31.5” W (80cm) Aspect Ratio 16:9 Pixel Pitch 321E1SC/322E1C: 0.364 x 0.364mm325E1C: 0.272 x 0.272mm328E1C: 0.182 x 0.182mm Contrast ratio (typical) 321E1SC/322E1C/325E1C...
Page 23 - Connectivity
21 6. Technical Specifications Color gamut Yes (325E1C/328E1C) sRGB Yes LowBlue Mode Yes Flicker Free Yes AMD FreeSync Yes (321E1SC/322E1C/325E1C) Adaptive Sync Yes (328E1C) Delta E Yes (328E1C) SmartUniformity Yes (328E1C) Connectivity Signal Input 321E1SC: Analog: VGA; Digital,HDCP: HDMI 1.4 322E1...
Page 26 - Environmental
24 6. Technical Specifications Relative humidity (operation) 20% to 80% Atmospheric pressure (operation) 700 to 1060hPa Temperature range (Non-operation) -20°C to 60°C Relative humidity(Non-operation) 10% to 90% Atmospheric pressure(Non-operation) 500 to 1060hPa Environmental ROHS YES Packaging 100%...
Page 27 - Maximum Resolution
25 6. Technical Specifications 6.1 Resolution & Preset Modes Maximum Resolution 321E1SC/322E1C: 1920 x 1080@60Hz (analog input) 1920 x 1080@75Hz (digital input) 325E1C: 1920 x 1080@60Hz (analog input) 2560 x 1440@75Hz (digital input) 328E1C: 3840x2160@60Hz (digital input) Recommended Resolution ...
Page 28 - Resolution
26 6. Technical Specifications 325E1C: H. freq (kHz) Resolution V. freq (Hz) 31.47 720 x 400 70.09 31.47 640 x 480 59.94 35.00 640 x 480 66.67 37.86 640 x 480 72.81 37.50 640 x 480 75.00 37.88 800 x 600 60.32 46.88 800 x 600 75.00 48.36 1024 x 768 60.00 60.02 1024 x 768 75.03 44.77 1280x 720 59.86 6...
Page 30 - Customer care and warranty; Customer care and; Philips’ Flat Panel Monitors; subpixel; Pixels and Sub pixels
28 8. Customer care and warranty 8. Customer care and warranty 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or s...
Page 31 - Note
29 8. Customer care and warranty Three adjacent lit sub pixels (one white pixel). Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or s...
Page 33 - Philips Customer Care Center number listed below.
31 8. Customer care and warranty 8.2 Customer Care & Warranty For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center. For Warranty Period please refer...
Page 34 - FAQs; Common Problems
32 9. Troubleshooting & FAQs 9. Troubleshooting & FAQs 9.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems No Picture (Power LED...
