Philips 300WN5 - Manual

About This Manual Notes, Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: NOTE: This icon indicates important information and tips that help you mak...

Product Information Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features 300WN5 ● 29.5-inch WXGA (1280x768 resolution, 170 degr...

Product Information • Pixel Pitch 0.5025 x 0.5025 mm • LCD Panel type 1280 x 768 pixelsR.G.B. vertical stripe Hard coating surface, anti-glare polarizer • Effective viewing area (H) 643.2 x (V) 385.92mm • Display Colors 8 bits interface (16.7M colors) PC SCANNING • Vertical refresh rate 58Hz-60Hz • ...

Product Information • Contrast ratio 800:1 (typ.) • Brightness 600 cd/m 2 (typ.) • Peak contrast angle 6 o'clock • White Chromaticity x: 0.283 y: 0.297 (at 9300°K)x: 0.313 y: 0.329 (at 6500°K)x: 0.328 y: 0.344 (at 5700°K) • Viewing Angle (C/R >5) Upper >85° (typ.)Lower >85° (typ.)Left >8...

Product Information 10 factory preset modes: Resolution Mode H. freq (kHz) V. freq (Hz) PC 640*480 VGA VESA 60 31.469 59.940 800*600 SVGA VESA 60 37.879 60.317 1024*768 XGA VESA 60 48.363 60.004 1280*768 GTF 60 47.700 60.000 Video EDTV 480P 31.470 60.000 SDTV 480i 15.734 59.940 EDTV 576P 31.250 50.0...

Product Information OFF Blanked No No < 5W Amber AC OFF Blanked No No < 2W Off This monitor is E NERGY S TAR ® compliant. A s an E NERGY S TAR ® P artner, PHILIPS has determined that this product meets the E NERGY S TAR ® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Spe...

Product Information Pin No. Signal Pin No. 1 Audio right channel output (0.5 Vrms, < 1K ohms) 2 2 Audio right channel input (0.5 Vrms, > 10K ohms) 1 3 Audio left channel output (0.5 Vrms, < 1K ohms) 6 4 Audio ground 4 5 Blue signal ground 5 6 Audio left channel input (0.5 Vrms, > 10K ohm...

Product Information 19 Composite video signal output (1 Vp-p, 75 ohms, sync: negative) 20 20 Composite video signal input (1 Vp-p, 75 ohms, sync: negative) 19 21 Plug shield (common ground) 21 RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its compon...

Installing your LCD Monitor/TV Installing your LCD Monitor/TV Product Description • Connecting to Your PC, TV antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Product Description Side View (Left) 1 INPUT Selecting input source 2 Increase or decrease the channel numberormoving up or d...

On Screen Display On Screen Display On Screen Display Control • Using Your Remote Control On Screen Display Controls An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your Monitor/TV. There are three different modes of OSD av...

On Screen Display 2. Push the and buttons to move between the function icons. As you move from one icon to another, the function name will be highlighted. 3. Push the MENU button once to activate the highlighted function. Push / to select the preferred parameter, push the button to enter the selecte...

On Screen Display AUDIO SURROUND: ON/OFF MUTE: ON/OFF AUDIO SOURCE: Only in PC TV/VIDEO mode POWER SAVING: ON/OFF SIZE & POSITION Positioning moves the viewing area around on the monitor screen. EXIT: Exit this menu H.POSITION /V.POSITION: When making changes to either the 'Horizontal' or 'Verti...

On Screen Display NOTE:1. When operating in DVI mode, the positioning adjustments are not available. 2. The 4:3 Aspect Ratio and Full Screen items are not available in WXGA 1280x768 modes. IMAGING SETTINGS To adjust the image settings. EXIT: Exit this menu AUTO ADJUST :Press to select automatic adju...

On Screen Display Note: Operating in DVI mode, the Pixel Clock and Phase adjustments are not available. COLOR SETTINGS Color Settings adjusts the color temperature. EXIT: Exit this menu NATURE COLOR: Equivalent to original panel color. NORMAL COLOR: 6500K (Same as sRGB) default from FACTORY BLUE PRE...

On Screen Display OSD SETTINGS Each time the OSD opens, it displays in the same location on the screen. 'OSD Settings' (horizontal/vertical) provides control over this location. EXIT: Exit this menu HORIZONTAL: Adjustable from 0 to 100. VERTICAL: Adjustable from 0 to 100. OSD HOLD TIME: The OSD stay...

On Screen Display Note: When the OSD is locked, press menu button on the monitor, and the OSD LOCK menu will appear. Press (+) to unlock and allow user access to all applicable settings. LANGUAGE Language sets the OSD to display in one of the five or six languages provided. That is, English, Spanish...

On Screen Display FACTORY RESET Reset the settings to the factory default values. EXIT: Exit this menu POSITION SETTINGS ONLY: Resume position setting to factory default. COLOR SETTINGS ONLY: Resume color setting to factory default. All SETTINGS: Load all factory default settings. PICTURE IN PICTURE...

On Screen Display RETURN TO TOP OF THE PAGE Audio/Video Mode EXIT Exit from this menu. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (10 of 23)2005-02-16 10:33:16 AM Downloaded From TV-Manual.com Manuals

On Screen Display INPUT SELECT Use up and down arrow button to highlight the "INPUT SELECT". Select video source for main display: ● PC ANALOG: PC VGA input ● PC DIGITAL: PC DIGITAL input ● TV TUNER: Antenna or cable TV input ● EXT: Scart input ● COMPOSITE: Composite video input ● S-VIDEO: S...

On Screen Display PICTURE COLOR TEMP: Select from Normal, Cool or Warm by "-" and "+" buttons. NOTE: 1. "TINT" is not available in component input in all models. 2. "TINT" is available in NAFTA model only. 3. "HOR SHIFT" only function in component input. AUDIO...

On Screen Display LANGUAGE Set language for OSD. There are 6 languages of OSD display. ● ENGLISH ● ● ● DEUTSCH ● ITALIANO ● NOTE: In AP/China models, Simplified Chinese is supported. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (13 of 23)2005-02-16 10:33:16 AM Downloaded From ...

On Screen Display PARENTAL CONTROLS 2) Users will see the window "Access code" when they enter this function. ● EXIT ● LOCK ● CHANGE CODE ● CLEAR ALL 3) Enter Master code "0711" twice or the code entered in step 1. FACTORYRESET Reset the setting to default values. NO: Keep the settin...

On Screen Display RETURN TO TOP OF THE PAGE TV Mode EXIT Exit from this menu INPUT SELECT Select video source for main display: ● PC ANALOG: PC VGA input ● PC DIGITAL: PC DIGITAL input ● TV TUNER: Antenna or cable TV input ● EXT: Scart input ● COMPOSITE: Composite video input ● S-VIDEO: S-video inpu...

On Screen Display PICTURE Adjust picture characteristics to suit personal preference. EXIT: Exit from this menu BRIGHTNESS: Adjustable from 0 to 100 CONTRAST: Adjustable from 0 to 100 COLOR: Adjustable from 0 to 100 SHARPNESS: Adjustable from 0 to 100 TINT: Not available in component input. Adjustab...

On Screen Display 3) Enter Master code "0711" twice or the code entered in step 1. SETUP SYSTEM: NOTE: The SYSTEM item is only available in Western Europe model. CHANNEL SEARCH: file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/osddesc.htm (21 of 23)2005-02-16 10:33:16 AM Downloaded Fr...

Remote Control Remote Control On Screen Display • Using Your Remote Control Using Your Remote Control For Europe and most of Asia Pacific countries For Europe and most of Asia Pacific countries Remote Control Diagram file:///D|/My%20Documents/dfu/300WN5/english/300wn5/OSD/tv_control.htm (1 of 4)2005...

Remote Control 1 Standby To set the TV temporarily to standby mode. To switch on the TV set, press Programme button (p -, +), any digit between 0 and 9 or AV source button(The amber light indicates when set is in standby mode) 2 AV source ● To select TV/Video sources in PIP mode and TV mode ● If usi...

Remote Control 5 PIP Shift To change 'Picture in Picture' window position in PC mode 6 Mute To disable sound. To restore sound, press button again. 7 Volume/Cursor control 1. Volume level up/down 2. cursor left/right(When in menu) 8 Menu To turn on or off the OSD (On-Screen Display).To select functi...

Remote Control 19 Sound mode ● To switch from STEREO to MONO or to choose between Dual I and Dual II for bilingual transmissions.For TV sets fitted with NICAM reception, depending on the transmission, you can switch from NICAM STEREO to MONO or choose between NICAM DUAL I, NICAM DUAL II and MONO. ● ...

Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY COVERAGE WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden...

Download and Print Download and Print Installing your LCD monitor driver • Download and Printing Instructions • Installing FPadjust Program Installing Your LCD monitor driver System requirements: ● PC running Windows® 95, Windows® 98, Windows® 2000 , Windows® Me, Windows® XP or later ● Find your dri...

Download and Print 2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Printing instructions: To print the manual: 1...

Download and Print Download FP_setup04.exe ● From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. ● Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). ● Exit your browser and...

FAQs (Frequently Asked Questions) FAQs (Frequently Asked Questions) Safety and Troubleshooting • General FAQs • Screen Adjustments • Compatibility with Other Peripherals • LCD Panel Technology • Ergonomics, Ecology and Safety Standards • Troubleshooting • Regulatory Information • Other Related Infor...

FAQs (Frequently Asked Questions) A: A protective coating is applied to the surface of the LCD, which is durable to a certain extent (up to 3H in this Philips 30" LCD monitor). In general, it is recommended that the panel surface is not subjected to any excessive shocks or scratches. An optional...

FAQs (Frequently Asked Questions) A: 1. For best performance, make sure your display settings are set at 1280x768@60Hz. Note: You can check the current display settings by pressing the OSD OK button once. The current display mode is shown in the product information in the OSD main controls. 2. To in...

FAQs (Frequently Asked Questions) platforms. Q: What is a TV System? A: Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I and L L'. The SYSTEM setting is used to select these different standards. This is not to be confused with PAL or SE...

FAQs (Frequently Asked Questions) displays it. Since the refraction ratio of inlet light on liquid crystal varies with the inlet angle of the light, the viewing angle of a TFT is much narrower than that of a CDT. Usually, the viewing angle refers to the point where the contrast ratio is 10. Many way...

FAQs (Frequently Asked Questions) Q: Does the product conform to general safety standards? A: Yes. Philips LCD monitors conform to the guidelines of MPR-II standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability. Th...

Troubleshooting Troubleshooting Safety and Troubleshooting • FAQs • Common Problems • TV and Audio Problems • Video Problems • Remote Control Problems • Product Specific Problems • OSD Warning Message • Self-Test Feature Check (STFC) • Regulatory Information • Other Related Information This page dea...

Troubleshooting TV and Audio Problems Poor TV signal reception Abnormal picture seen from the screen ● The proximity of mountains or high buildings may be responsible for ghost pictures, echoing or shadows. In this case, try manually adjusting your pictures: see 'fine tuning' or adjust the direction...

Troubleshooting No Video No signal indicator is displayed. ● Check Video Input Selection ❍ Composite: Yellow colored RCA jack ❍ S-Video: Typically a round 4 pin jack ❍ Component: Typically 3 RCA jacks of Green, Red and Blue. ● Make sure you did not plug the video cable to video output port behind th...

Troubleshooting Cannot adjust the LCD Monitor TV with the buttons at the side of the unit OSD does not appear on the screen ● Turn the LCD Monitor TV off and unplug the power cord and then plug back and power on. For further assistance, refer to the Consumer Information Centers list and contact your...

Troubleshooting This message means that there is no video input signal. The LCD Monitor TV is in a power saving mode (in PC mode). The main OSD menu is unlocked. The main OSD menu is locked. RETURN TO TOP OF THE PAGE Self-Test Feature Check (STFC) Your the LCD Monitor TV when used as a computer disp...

Regulatory Information Regulatory Information CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic Only) • VCCI Class 2 Notice (Japan Only)...

Regulatory Information - TCO99, TCO03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions RETURN TO TOP OF THE PAGE Energy Star Declaration PHILIPS 300WN5 This monitor is equipped with a function f...

Regulatory Information RETURN TO TOP OF THE PAGE Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectio...

Regulatory Information Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installat...

Regulatory Information RETURN TO TOP OF THE PAGE VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environ...

Regulatory Information Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached...

Regulatory Information RETURN TO TOP OF THE PAGE North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. file:///D|/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/REGS/REGULAT.HTM (...

Regulatory Information Ergonomie Hinweis (nur Deutschland) Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß 1. Reparaturen nur durch Fachpersonal durchgeführt werden. 2. nur original-Ersatzteile verwendet werden. 3. bei Ersatz der Bildröhre nur ei...

Regulatory Information WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved typ...

Regulatory Information connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW. 2. The BLUE wire must be connected to the terminal which is marked with the letter "N" or coloured BLACK. 3. The BROWN wire m...

Other Related Information Other Related Information Safety and Troubleshooting • FAQs • Troubleshooting • Regulatory Information • Information for Users in the U. S . • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisti...

Philips Pixel Defect Policy Philips Pixel Defect Policy Product Features • Technical Specifications • Resolution and Preset Modes • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Philips' LCD Panel Pixel Defect Policy Philips strives to deliver the highest quality p...

Philips Pixel Defect Policy Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Bright Dot Defects appear as pixels or sub pixels that are always lit or 'on'....

Philips Pixel Defect Policy One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defec...

Philips Pixel Defect Policy * Here in Tiny Bright Dot is defined as "for Red and Blue" the bright area should be no longer than 1/2 sub-pixel and for green the bright area should be no larger than 1/3 sub-pixel. BLACK DOT DEFECTS ACCEPTABLE LEVEL MODEL 300WN5 1 dark sub pixel 5 or fewer 2 ad...

Connecting to Your PC, TV Antenna, DVD/VCR etc. Connecting to Your PC, TV Antenna, DVD/VCR etc. Product Description • Accessory Pack • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Accessory Pack Unpack all the parts. Power cable Remote control & batt...

Connecting to Your PC, TV Antenna, DVD/VCR etc. E-DFU pack Accessories below are available for TV model only. S-video cable Base 2x 5W Detachable Speakers RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (2 of 13)2005-02-16 10:33:47 AM Downloaded From...

Connecting to Your PC, TV Antenna, DVD/VCR etc. Setting up and connecting your monitor/TV CAUTION: Ensure that the power to the monitor/TV is switched off before the installation. - Connecting the monitor/TV ● Connect the cables to the rear of your monitor/TV according to the numbers: TV model file:...

Connecting to Your PC, TV Antenna, DVD/VCR etc. Monitor model file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (5 of 13)2005-02-16 10:33:47 AM Downloaded From TV-Manual.com Manuals

Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE - Connect to PC ● Connect the cables to the back of your computer by following step 1~3. ● If your monitor displays the computer image the installation has been completed successfully. ● If installation was not successful, see...

Connecting to Your PC, TV Antenna, DVD/VCR etc. RETURN TO TOP OF THE PAGE Connecting to Cable TV file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (10 of 13)2005-02-16 10:33:47 AM Downloaded From TV-Manual.com Manuals

Connecting to Your PC, TV Antenna, DVD/VCR etc. Antenna Progressive video and HDTV connections for digital high-definition picture file:///D|/My%20Documents/dfu/300WN5/english/300wn5/INSTALL/connect.htm (11 of 13)2005-02-16 10:33:47 AM Downloaded From TV-Manual.com Manuals

Getting Started Getting Started Product Description • Connecting to Your PC, TV Antenna, DVD/VCR etc. • Getting Started • Optimizing Performance Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug &...

Getting Started For Windows® Me 1. Start Windows® Me 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' button, then click on 'Change...' button. ...

Your Philips F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties ...

Your Philips F1rst Choice Warranty ● Damage is caused by accidents including but not limited to lightning, water or fire, misuse or neglect; ● Reception problems caused by signal conditions or cable or antenna systems outside the unit; ● Defects caused by abuse or misuse of the monitor; ● Product re...

Your Philips F1rst Choice Warranty Information. Or you can reach us via: Website: http://www.philips.com/support file:///D|/My%20Documents/dfu/300WN5/english/warranty/war_1st.htm (3 of 3)2005-02-16 10:33:54 AM Downloaded From TV-Manual.com Manuals

International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and repl...

United States Guarantee PHILIPS LIMITED WARRANTY One (1) Year Labor and Parts Repair PHILIPS CONSUMER ELECTRONICS warrants this product against defect in material or workmanship, subject toany conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive ...

F1rst Choice Contact Information F1rst Choice Contact Information Country Telephone number Tariff Austria 01 546 575 603 Local call tariff Belgium 070 253 010 0.17 Cyprus 800 92256 Free of Charge Denmark 3525 8761 Local call tariff Finland 09 2290 1908 Local call tariff France 08 9165 0006 0.23 Germ...

Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Brasil • Canada • Chile • China • Colombia • Belarus • Bulgaria • Croatia • Czech Republic • Estonia • Dubai • Hong Kong • Hungary • India • Indonesia • Korea • Latvia • Lithuania • Malaysia • M...

Consumer Information Centers CROATIA Renoprom d.o.o.Mlinska 5, StrmecHR - 41430 SamoborTel: +385 1 333 0974 ESTONIA FUJITSU SERVICES OUAkadeemia tee 21GEE-12618 TallinnTel: +372 6519900www.ee.invia.fujitsu.com HUNGARY Serware SzervizVizimolnár u. 2-4HU - 1031 BudapestTel: +36 1 2426331Email: inbox@s...

Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL115, Mihai Eminescu St., Sector 2RO - 020074 BucharestTel: +40 21 2101969 SERBIA & MONTENEGRO Tehnicom Service d.o.o.Bulevar Vojvode Misica 37BYU - 11000 BelgradeTel: +381 11 3060 886 SLOVAKIA Datalan Servisne Stredisko Puchovska...

Consumer Information Centers TURKEY Türk Philips Ticaret A.S.Yukari Dudullu Org.San.Bolgesi2.Cadde No:22 34776-Umraniye/IstanbulTel: (0800)-261 33 02 UKRAINE ComelShevchenko street 32UA - 49030 DnepropetrovskTel: +380 562320045www.csp-comel.com Latin America ANTILLES Philips Antillana N.V.Kaminda A....

Consumer Information Centers CHILE Philips Chilena S.A.Avenida Santa Maria 0760P.O. box 2687Santiago de ChilePhone: (02)-730 2000Fax : (02)-777 6730 COLOMBIA Industrias Philips de ColombiaS.A.-Division de ServicioCARRERA 15 Nr. 104-33Bogota, ColombiaPhone:(01)-8000 111001 (toll free)Fax : (01)-619-4...

Consumer Information Centers PERU Philips Peruana S.A.Customer DeskComandante Espinar 719Casilla 1841Limab18Phone: (01)-2136200Fax : (01)-2136276 URUGUAY Rambla O'Higgins 5303 MontevideoUruguayPhone: (598) 619 66 66Fax: (598) 619 77 77Customer Desk:Phone: 0004054176 VENEZUELA Industrias Venezolanas ...

Consumer Information Centers AUSTRALIA Philips Consumer ElectronicsConsumer Care CenterLevel 1, 65 Epping RdNorth Ryde NSW 2113Phone: 1300 363 391Fax : +61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd.Consumer Help Desk2 Wagener Place, Mt.AlbertP.O. box 1041AucklandPhone: 0800 477 999 (toll free)...

Consumer Information Centers HONG KONG Philips Electronics Hong Kong LimitedConsumer ServiceUnit A, 10/F. Park Sun Building103-107 Wo Yi Hop RoadKwai Chung, N.T.Hong KongPhone: (852)26199663Fax: (852)24815847 INDIA Phone: 91-20-712 2048 ext: 2765Fax: 91-20-712 1558 BOMBAYPhilips IndiaCustomer Relati...

Consumer Information Centers INDONESIA Philips Group of Companies in IndonesiaConsumer Information CentreJl.Buncit Raya Kav. 99-10012510 JakartaPhone: (021)-7940040 ext: 2100Fax : (021)-794 7511 / 794 7539 KOREA Philips Korea Ltd.Philips HouseC.P.O. box 3680260-199, Itaewon-Dong.Yongsan-Ku, Seoul 14...

Consumer Information Centers PHILIPPINES PHILIPS ELECTRONICS & LIGHTING, INC.Consumer Electronics48F PBCOM tower6795 Ayala Avenue cor VA Rufino St.Salcedo Village1227 Makati City, PHILSPhone: (02)-888 0572, Domestic Toll Free: 1-800-10-PHILIPS or 1-800-10-744 5477Fax: (02)-888 0571 SINGAPORE Acc...

Consumer Information Centers MOROCCO Philips Electronique Maroc304,BD Mohamed VCasablancaPhone: (02)-302992Fax : (02)-303446 SOUTH AFRICA PHILIPS SA (PTY) LTDCustomer Care Center195 Main RoadMartindale, JohannesburgP.O. box 58088Newville 2114Telephone: +27 (0) 11 471 5194Fax: +27 (0) 11 471 5123E-ma...