Page 2 - Congratulations on your purchase, and welcome to the “family!”; Dear PHILIPS product owner:; Know these; safety; symbols; ATTENTION
Return your Product Registration Card today to get the very most from your purchase. Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available today.We’ll d...
Page 3 - Damage Requiring Service; Note to the CATV system installer:
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings.Install in ...
Page 4 - ready to connect to the TV.; Connect the Cable TV; cable or; ELPFUL; Cable signal; Antenna Connection
B ASIC A NTENNA AND C ABLE C ONNECTIONS Y our home’s signal input mightcome from a single (75 ohm) round cable, a Converter Box, or froman antenna. In either case the connec-tion to the TV is very easy. 1 If your Cable TV signal orAntenna signal is a roundcable (75 ohm) then you're ready to connect ...
Page 5 - f your cable signal uses a cable
TO TV/VCR CABLE IN IR USB DVD-D OUT AUDIO IN SPDIF VIDEO IN OUT S-VIDEO R L AUDIO OUT TV PASSCARD Y Pb Pr OPTICAL SPDIF 4 24 ANT 75‰ L/Mono Monitor out VIDEO S-VIDEO AV1 in Y Pb Pr AV2 in AUDIO R COMPONENT VIDEO INPUT L/Mono Monitor out VIDEO S-VIDEO AV1 in Y Pb Pr AV2 in AUDIO R COMPONENT VIDEO INP...
Page 6 - ASIC; TV; AND; o load the supplied batteries; Standby Light Indicator
POWER 3 + – VOLUME + – CHANNEL 2 1 B ASIC TV AND R EMOTE C ONTROL O PERATION 3 1 Press the POWER button to turn the TV ON. Note: You can also press anybutton on the front of the TV toturn the TV ON. 2 Press the VOLUME + button to increase the sound level, or the VOLUME – button to lower the sound le...
Page 7 - and AV2 Input Jack connections; AV; jacks on the rear of the TV.; press the PLAY button; to view the tape on the television.
AV (A UDIO /V IDEO ) I NPUT C ONNECTION 4 L/Mono Monitor out VIDEO S-VIDEO AV1 in Y Pb Pr AV2 in AUDIO R COMPONENT VIDEO INPUT AUDIO OUT R L S-VIDEO OUT ANT/CABLE OUT VIDEO OUT 3 AUDIO OUT R L S-VIDEO OUT ANT/CABLE OUT VIDEO OUT 3 4 5 7 1 2 4 2 1 5 7 Audio and video cables are not sup-plied with the...
Page 8 - The accessory device must; press the PLAY
S-V IDEO (S-V HS ) I NPUT C ONNECTIONS T he S(uper)-Video connection onthe rear of the TV can provide you with better picture detail andclarity for the playback of accessorysources such as DBS (digital broad-cast satellite), DVD (digital videodiscs), video games, and S-VHS VCR(video cassette recorde...
Page 10 - SECOND VCR CONNECTION:
M ONITOR O UT ( PUT ) C ONNECTIONS 8 T he Audio/Video (Monitor) Outputjacks are great for recording with a VCR or used to connect an exter-nal audio system for better soundreproduction. AUDIO SYSTEMCONNECTION: 1 Connect one end of theR(ight) and L(eft) AUDIO(Monitor Out) jacks on the TV to the R and...
Page 12 - POWER Button; Press to turn the TV on or off.; FROWNIE Button; or CURSOR
R EMOTE C ONTROL B UTTON D ESCRIPTIONS 10 VOL POWER Button Press to turn the TV on or off. A/CH Button (Alternate Channel) Press to toggle between the last viewed channeland the channel presently being viewed. FROWNIE Button Allows you to delete channels from the “QuadraSurf” lists for the colored b...
Page 13 - OW TO
VOL Main Picture Sound Features Install Brightness Color Picture Sharpness Tint More... Main Picture Sound Features Install Language Tuner Mode Auto Program Channel Edit Install Language Tuner Mode Auto Program Channel Edit English OR Instalar Idioma Sinton a Auto Programa Editar Canal Espa ol 6 2 4...
Page 15 - buttons are
A UTOMATICALLY P ROGRAM 13 Auto Program Channel 12 Main Picture Sound Features Install Brightness Color Picture Sharpness Tint More... Main Picture Sound Features Install Language Tuner Mode Auto Program Channel Edit Install Language Tuner Mode Auto Program Channel Edit Auto Program Channel 13 Auto ...
Page 16 - list of channels stored in the TV’s memory.
C HANNEL E DIT 14 C hannel Edit makes it easy for you toADD or DELETE channels from the list of channels stored in the TV’s memory. 1 Press the MENU button on the remote control to show the on-screen menu. 2 Press the CURSOR UP 3 or DOWN 4 buttons to scroll though the on-screen menu until the word I...
Page 17 - o adjust your TV picture controls,
P ICTURE M ENU C ONTROLS 15 Picture Brightness Color Picture Sharpness Tint Color Temp. 50 Brightness 65 Color 50 Picture 50 Sharpness 50 Color Temp. Normal Warm or Cool DNR On Off Tint 0 Contrast + On Off T o adjust your TV picture controls, select a channel and use the Picture Menu Controls listed...
Page 18 - o adjust your TV sound, select and
S OUND M ENU CONTROLS 16 T o adjust your TV sound, select and use the Sound Menu Controls listed below: 1 Treble: Press the CURSOR RIGHT 2 or LEFT 1 buttons to adjust the control. The control will enhance the high frequency sounds. 2 Bass: Press the CURSOR RIGHT 2 or LEFT 1 buttons to adjust the con...
Page 19 - Press the CURSOR UP
VOL 1 1 4:3 Expand 4:3 M any times while watching movies from a DVD player the image is shown in “letter box” for- mat. This is the format that is shown in movie theaters. when shown on a TV screen, the image will have areas of black on top and bottom of the screen. 1 Press the CURSOR UP 3 or DOWN 4...
Page 20 - ETTING THE; TV C; LOCK; NOTE: Active Control will only
S ETTING THE TV C LOCK U SING T HE T IMER C ONTROL 18 Y our television comes with anon-screen clock. During nor- mal operation, the clock appearson the screen when theSTATUS/EXIT button is pressed orif the Timer Display control isturned On. 1 Press the MENU button on the remote to show the on-screen...
Page 22 - ETTING; TO; ou can select a specific channel
S ETTING TV TO S TARTUP ON A S PECIFIC C HANNEL 20 Y ou can select a specific channel that the television will tune to when the timer turns the set On. Follow these steps to select the channel. 1 Press the MENU button on the remote to show the on- screen menu. 2 Press the CURSOR UP 3 or DOWN 4 butto...
Page 23 - fter you have set the Time, Start
A CTIVATE C ONTROL 21 A fter you have set the Time, Start Time, Stop Time, and Start Channel, the timer must be set to come on Once or Daily, or turned Off through the Activate control. 1 Press the MENU button on the remote to show the on-screen menu. 2 Press the CURSOR UP 3 or DOWN 4 buttons to scr...
Page 26 - he AutoLockTM feature is an integrat-
U NDERSTANDING A UTO L OCK C ONTROLS 24 T he AutoLock™ feature is an integrat- ed circuit that receives and processes data sent by broadcasters, or other pro-gram providers, that contain programcontent advisories. When programmedby the viewer, a TV with AutoLock™ canrespond to the content advisories...
Page 28 - Block Channel; Enter your
B LOCK C HANNELS 26 A fter your personal access codehas been set (see previous page), you are now ready to selectthe channels or the A/V Inputs youwant to block out or censor.Once you’ve entered your accesscode and the AutoLock™ featuresare displayed on the screen: 1 Press the CURSOR UP 3 or DOWN 4 ...
Page 29 - Clear All
BLOCK / CLEAR ALL CHANNELS AT THE SAME TIME 27 A fter blocking specific channelsthere may come a time when you want to block or clear all thechannels at the same time. Once you’ve entered your accesscode and the AutoLock™ featuresare displayed on the screen: 1 Press the CURSOR UP 3 or DOWN 4 buttons...
Page 30 - he AutoLockTM feature can
M OVIE R ATINGS 28 T he AutoLock™ feature can block programming based on the Movie Industry ratings. Once you’ve entered your accesscode and the AutoLock™ featuresare displayed on the screen: 1 Press the CURSOR UP 3 or DOWN 4 buttons to high- light the words Movie Rating. 2 Press the CURSOR RIGHT 2 ...
Page 31 - TV R; ATINGS; MA; On
TV R ATINGS 29 T he AutoLock™ feature can block programming based on the TV Industry ratings. Once you’ve entered your accesscode and the AutoLock™ featuresare displayed on the screen: 1 Press the CURSOR UP 3 or DOWN 4 buttons to high- light the words TV Rating. 2 Press the CURSOR RIGHT 2 button to ...
Page 32 - BLOCKING OPTIONS; or the; EMO
BLOCKING OPTIONS 30 A utoLock™ offers the viewer other block- ing features as well. With these Blocking Options, the censoring can be turned ON or OFF. Once you’ve entered your access code and the AutoLock™ features are displayed on the screen: 1 Press the CURSOR UP 3 or DOWN 4 buttons until the wor...
Page 33 - Press the CC button; CC Mute; CC Off; Press the SLEEP button; Sleep off; LEEPTIMER
C LOSED C APTIONING 31 C losed Captioning (CC) allowsyou to read the voice content of television programs on the TVscreen. Designed to help the hear-ing impaired, this feature uses on-screen “text boxes” to show dia-logue and conversations while theTV program is in progress. 1 Press the CC button on...
Page 34 - - Preset picture options; he Auto Sound feature allows; - Preset sound options
A UTO P ICTURE 32 A UTO S OUND W hether you’re watching amovie or a sporting event, your TV has automatic video con-trol settings matched for your cur-rent program source or content. 1 Press the AUTO PICTUREbutton on the remote control. The current Auto Picture set-ting will be displayed on thescree...
Page 35 - Press the SMILEY; to add the channel
Q UADRA S URF 33 T he QuadraSurf™ control allowsyou set up four different person- al channel Surf lists using the col-ored buttons (on the remote con-trol), each holding up to ten chan-nels in its quick viewing“list.” 1 Press the CHANNEL (+) or(–) buttons (or the NUMBER buttons) to select a channel ...
Page 36 - on the remote to; pressing the “frownie”; will allow you to
Q UADRA S URF 34 T he Quadra Surf buttons on yourremote control allow you to store up to 10 channels per button (40total). You can even program theA/V Input channels for each buttonmaking them a “source” button. Assuming channels have now beenadded to the four Quadra Surf lists(the four colored butt...
Page 37 - ROUBLESHOOTING; No Power
T ROUBLESHOOTING No Power • Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. • Check that the outlet is not on a wall switch. • Be sure the fuse is not blown on the AC power strip, if one is being used. No Picture • Chec...
Page 39 - OTES
Page 40 - PHILIPS LIMITED WARRANTY
EL6588E002 / 07-04 Printed in U.S.A. PHILIPS CONSUMER ELECTRON- ICS warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to receive warranted repair on the product. A sales rece...
