Page 3 - Contents
1 EN EnglishEnglish Contents 1 Notice 2 2 Important 3 The most updated user manual on line 4 3 Get started and connect your devices 5 Back connector 5 Side connector 6 Use a Conditional Access Module 7 Use Philips EasyLink 7 4 Controls 9 Side control buttons 9 Remote control 10 5 Start to use 11 Swi...
Page 4 - Notice
2 EN Mains fuse (UK only) This TV monitor is fitted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). 1 Remove fuse cover and fuse. 2 The replacement fuse must comply with B...
Page 5 - Important; Safety
3 EN English 2 Important Read and understand all instructions before you use your monitor. If damage is caused by failure to follow instructions, the warranty does not apply. Safety • Risk of electric shock or fire! • Never expose the monitor to rain or water. Never place liquid containers, such as ...
Page 6 - Recycling; The most updated user; Screen care
4 EN Recycling Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program, please visit www.philips.com/about/ sustainability/recycling. When you see the crossed-out wheeled bin symbol attached to a product, it ...
Page 7 - Get started and; Back connector
5 EN English a TV ANTENNA Signal input from an antenna, cable or satellite. b SPDIF OUT Digital audio output to home theaters and other digital audio systems. c PC IN (VGA and AUDIO IN) Audio and video input from a computer. VGA The connection via VGA requires an additional audio cable. 3 Get starte...
Page 8 - Side connector
6 EN Side connector 1 2 3 a COMMON INTERFACE Slot for a Conditional Access Module (CAM). b USB For music, photo, and video. c HEADPHONE Audio output to your headphones. d HDMI Digital audio and video input from high- definition digital devices such as Blu-ray players. e SERV. U For use by ser vice p...
Page 9 - Use Philips EasyLink; Switch on or off EasyLink; Use a Conditional Access; Insert and activate a CAM; Access CAM services
7 EN English Note • This menu option is available only if the CAM is inser ted and activated correctly. Use Philips EasyLink Get the most out of your HDMI-Consumer Electronic Control (CEC) compliant device with Philips EasyLink enhanced control features. To enable Philips EasyLink, you need to: • Co...
Page 11 - Controls; Side control buttons
9 EN English a POWER: Switch the monitor on or off. The monitor is not powered off completely unless it is physically unplugged . b CH +/-: Switch to the next or previous channel. c SOURCE: Select an input source. Return to the previous screen or exit from the on-screen menu. d / : Increase or decre...
Page 12 - Remote control
10 EN Remote control 14 1 2 20 18 15 17 16 4 3 5 6 78 9 1011 12 13 19 a (Standby-On) • Switch the monitor to standby if the monitor is on. • Switch the monitor on if the monitor is in standby. b Play buttons Control video or music. c SOURCE Select connected devices. d (Home) Access the home menu. e ...
Page 13 - Start to use; Switch your monitor on/off
11 EN English To switch on • If the standby indicator is off, press POWER under the front bezel. • If the standby indicator is red, press ( Standby-On ) on the remote control. To switch to standby • Press ( Standby-On ) on the remote control. È The standby indicator switches to red. To switch off • ...
Page 14 - Watch connected devices; To select from the SOURCE button; Switch channels
12 EN Watch connected devices Note • Switch on the connected device before selecting it as a source on the monitor. To select from the SOURCE button TV SCART VGA HDMI 1 HDMI 2 1. Press SOURCE to display the source list. È The source list appears. 2. Press SOURCE , ▲ or ▼ to select a device. 3. Press...
Page 15 - Adjust monitor volume
13 EN English Adjust monitor volume To turn up or down the volume • Press +/- on the remote control. • Press / buttons at the front of the monitor To mute or restore the muted sound • Press to mute the sound. • Press again to restore the sound.
Page 16 - Product; Supported Display Resolution
14 EN Sound • Output power (RMS): 3W x 2 • Sound Enhancement: Incredible Surround, Smar t Sound • Sound System: Mono, Stereo, Nicam Stereo Convenience • Ease of Installation: Plug & Play, Automatic Tuning System (ATS) • Ease of Use: On Screen Display, Program List, Side Control • Remote control ...
Page 18 - Step 2: Select your country; Update the channel list; installation; Automatically install channels; Step 1: Select your menu language
16 EN Step 2: Select your country Select the countr y where you are installing the TV. The available channels for the countr y are installed on the TV. Select Re-install channels to search and store all channels. Select update channels to update your current list. Update channels Re-install Channels...
Page 19 - Rename channels; Manually install channels; Step 1: Select your system; Step 2: Search and store new TV
17 EN English 3. When the channel is found, select [Done] , then press OK . • To store the channel as a new number, select [Store as new channel] , then press OK . • To store the channel as the previously selected channel, select [Store current channel] , then press OK . Step 3: Fine-tune analogue c...
Page 20 - Test digital reception; Rearrange channels
18 EN Test digital reception You can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish.1. Press .2. Select [Setup] > [Channel settings] > [Channel installation] > [Digital: Reception test] , then press OK . 3. En...
Page 21 - Change picture and sound; Manually adjust picture settings; Settings; Access TV menus
19 EN English Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Note • While you watch TV or ex ternal devices, press ADJUST , then select [Smart picture] or [Smart sound] for quick access to ...
Page 22 - Change picture format; Summary of picture formats
20 EN Change picture format 1. Press ADJUST . 2. Select [Picture format] , then press OK . 3. Select a picture format, then press OK . Summary of picture formats The following picture settings can be configured. Note • Depending on the format of the picture source, some picture settings are not avai...
Page 23 - Use the universal access; Manually adjust sound settings
21 EN English • [Surround]: Switch on spatial sound. • [Headphone volume]: (For models with headphones) Adjust headphone volume. • [Auto volume levelling]: Automatically reduce sudden volume changes, for example when switching channels. • [Balance]: Adjust the balance of the right and left speakers....
Page 24 - Access the teletext options menu; Select teletext subpages
22 EN Use advanced teletext features Access the teletext options menu Access the teletext features through the teletext options menu.1. Press TEXT . È The teletext screen appears. 2. Press OPTIONS . È The teletext options menu appears. 3. Select one of the following options, then press OK . • [Freez...
Page 25 - Create and use lists of; View only the list of favourite; View all channels; Manage the favourites list
23 EN English Select T.O.P. teletext broadcasts Jump from one subject to another without entering page numbers with Table Of Pages (T.O.P.) teletext broadcasts. T.O.P. teletext broadcasts are available on selected TV channels.1. Press TEXT . È The teletext screen appears. 2. Press OPTIONS . 3. Selec...
Page 26 - Switch on EPG; Change programme guide options; Display the TV clock; Set the TV clock manually
24 EN Use the Electronic Programme Guide The programme guide is an on-screen guide available for digital channels. It allows you to: • View a list of digital programmes being broadcast • View upcoming programmes • Group programmes by genre • Set reminders when programmes star t • Setup preferred pro...
Page 27 - Change the clock mode; Use daylight saving; Use timers; Automatically switch the TV to
25 EN English Display the TV clock 1. While you watch TV, press OPTIONS . È The options menu is displayed. 2. Select [Clock] . 3. Press OK . Note • To disable the clock, repeat the procedure. Change the clock mode 1. Press .2. Select [Setup] > [TV settings] > [Preferences] > [Clock] > [A...
Page 28 - Set parental ratings; Change language; Change menu language; Lock unsuitable content; Set or change code; Lock or unlock one or more channels
26 EN 5. To activate the locks, switch the TV on and off. È When you access the locked channels from the channel grid, you are prompted to enter your PIN code. Set parental ratings Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with a...
Page 29 - Update the TV software
27 EN English Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Ways to update the TV software You can update the TV software in one of the following ways: A: with a USB storage device, or B: after b...
Page 30 - Change TV preferences
28 EN 5. Connect the USB storage device to your computer, then double-click the file. È A Web page is launched. 6. Follow the instructions in the Web page. • If the current software version matches the latest software update file, you do not need to update your TV software. • If the current software...
Page 31 - Start a TV demo; Reset the TV to factory
29 EN English Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on cer tain models. Available demos are displayed in the menu list.1. While you watch TV, press .2. Select [Setup] > [Watch demo] , OK . 3. Select a demo and press O...
Page 32 - Multimedia; on USB storage devices; View photos
30 EN 9 Multimedia This chapter describes how to use the multimedia function. Play photos, music, and video on USB storage devices Suppor ted video formats on the USB device: • Suppor ted storage device: USB (only FAT or FAT 32 USB storage devices are suppor ted.) • Compatible multimedia file format...
Page 34 - 0 Pixel policy; Types of Pixel Defects
32 EN 10 Pixel policy Philips strives to deliver the highest quality products. We use some of the industr y's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on a flat monitor panel are sometimes unavoidable. No manufacturer can guara...
Page 37 - 1 Troubleshooting; General monitor issues
11 Troubleshooting This section describes commonly encountered issues and suggested solutions. General monitor issues The monitor does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The rem...
Page 38 - Sound issues; HDMI connection issues
36 EN Computer connection issues The computer display on the monitor is not stable: • Check that a suppor ted resolution and refresh rate is selected on the computer. • Set the monitor picture format to unscaled. Contact us If you cannot resolve your problem, refer to the FAQs for this monitor at ww...
