Page 3 - Contents
1 7 Connect devices 27 Back connector for 19-22 inch TV 27 Back connector for 26 inch TV and larger 29 Side connector 30 Connect a computer 31 Use a Conditional Access Module 32 Use Philips EasyLink 32 Use a Kensington lock 33 8 Product information 34 Suppor ted display resolutions 34 Multimedia 34 ...
Page 4 - Notice
2 bright points of light (red, green or blue) may appear constantly on the screen. This is a structural proper ty of the display (within common industry standards) and is not a malfunction. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at cons...
Page 6 - Important; Safety
4 Avoid force coming onto power • plugs. Loose power plugs can cause arcing or fire. Risk of injur y or damage to the T V! • Two people are required to lif t and • carr y a T V that weighs more than 25 kg.When stand mounting the T V, use • only the supplied stand. Secure the stand to the T V tightly....
Page 7 - Screen care
5 Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is at tached to a product it means that the product is covered by the European Directive 20 02...
Page 8 - Remote control; overview; Side controls and indicators
6 Remote control 1 22 45 7 6 10 11 12 13 14 8 9 2 3 21 18 17 16 15 20 19 3 TV overview This section gives you an over view of commonly used TV controls and functions. Side controls and indicators a POWER: Switches the product on or off. The product is not powered off completely unless it is physical...
Page 10 - Switch channels; your
8 Note If you cannot locate your remote control and • want to switch on the T V from standby, press P/CH +/- or SOURCE at the side of the T V. Switch channels Press • P +/- on the remote control or P/CH +/- on the side of the T V. Enter a channel number using the • Numeric buttons . Use the channel ...
Page 11 - Use teletext; Watch connected devices; Use the source button; Adjust TV volume
9 Press • to mute the sound. Press • again to restore the sound. Use teletext 1 Press MHEG/TELETEXT . The main index page appears. » 2 Select a page as follows: Press the • Numeric buttons to enter a page numberPress • P +/- or to view the nex t or previous pagePress the • Colour buttons to select a...
Page 12 - Use more of; Access TV menus
10 Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 Press MENU 2 Press to select a device to remove. 3 Press OPTIONS . The » [Remove device] list appears. 4 Press OK and select [Remove] to remove the device. The selected device is remove...
Page 13 - Change picture format; Manually adjust picture settings
11 • [Tint] Adjusts the colour balance in an image. • [Custom tint] Make a customised tint set ting. (Only available if [Tint] > [Custom] is selected) • [Digital Crystal Clear] Fine-tunes each pixel to match surrounding pixels. This produces a brilliant, high-definition image.• [Dynamic contrast] ...
Page 14 - Use smart sound; Adjust sound settings; Summary of picture formats
12 [Unscaled] For HD and PC mode only, and in selected models only. Allows maximum sharpness. Some distor tion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results. Use smart sound Use smar t sound to apply pre-defined sound set tings. 1 Press S...
Page 15 - Access the teletext options menu
13 • [Delta volume] Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume. Use advanced teletext features Access the teletext options menu Most of the advanced teletex t features are accessed via the teletex t options m...
Page 16 - View all channels; Add a channel to a favourite list; Select teletext subpages; Select a favourite list
14 3 Press to select [Show fav. ch.] and press OK . The favourite lists appear. » 4 Press to select a favourite list and press OK . Only channels in the favourite list » appear in the channel grid. Note The favourite channel grid is empty until you • add channels into the favourite lists. View all c...
Page 17 - Switch on EPG; Use EPG
15 Use the Electronic Programme Guide EPG is an on-screen guide available for digital channels. EPG allows you to: View a list of digital programmes being • broadcastView upcoming programmes • Group programmes by genre • Set reminders when programmes star t • Set up preferred EPG channels • Switch o...
Page 18 - Use the EPG options menu; Use timers
16 3 Press to set the sleep time. The sleeptimer can be up to 180 » minutes in steps of five minutes. If set to zero minutes, the sleeptimer is switched off. 4 Press OK to activate the sleeptimer. The TV switches to standby after the » pre-defined period of time. Automatically switch the TV on (on tim...
Page 19 - Lock one or more channels; Unlock one or more channels; Lock or unlock the TV
17 4 Press to select [Lock] or [Unlock] . 5 Press OK to confirm. All channels and connected devices are » locked or unlocked. Note If you selec t • [Lock] , you have to enter your code ever y time you tur n on your T V to access all channels and connec ted devices. Lock one or more channels 1 When wa...
Page 20 - Enable subtitles on digital TV channels; Set parental ratings; Use subtitles
18 3 Enter the three-digit page number of the subtitle page with the Numeric buttons . 4 Press MHEG/TELETEXT to switch off teletex t. 5 Press SUBTITLE . The » [Subtitle mode] menu appears. 6 Select [On] to display subtitles always or [On during mute] to display subtitles only when audio is muted. 7 ...
Page 21 - Change the time zone; Use daylight saving; Use the TV clock; Display the TV clock; Change the clock mode
19 Change the time zone 1 Press MENU . 2 Press to select [Setup] > [Installation] > [Clock] > [Time zone] . 3 Press to select your time zone. 4 Press OK to confirm. Note This option is only available if you selec t • [Auto clock] > [Manual] (In countries with clock tr ansmission data). Us...
Page 22 - Change slide show settings; Listen to music; View photos; View a slide show of your photos
20 2 Press: • OK to pause the slide show. The » icon appears. Press • to go back or move for ward to the nex t image. • BACK to stop the slide show. Change slide show settings 1 When viewing a slide show, press OPTIONS . The slide show options menu appears. » 2 Press to select one of the following. ...
Page 23 - Update the TV software; Check the current software version; Music settings
21 Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/suppor t for availability. Check the current software version 1 Press MENU . 2 Press to select [Setup] > [Software update...
Page 24 - Access decoder channel; Set decoder channel; Start a TV demo; Change TV preferences
22 Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1 (SCART). Set decoder channel Map channels from a decode...
Page 26 - Step 3 Install channels; Install; Automatically install channels; Step 1 Select your menu language
24 3 Press OK or to enter the menu. The countr y menu appears. » 4 Press to select your countr y. 5 Press OK to confirm your choice. The channel installation guide appears » on the screen. Step 3 Install channels Install the available analogue and digital T V channels and digital radio channels autom...
Page 27 - Step 4 Update the channel list; Manually install channels; Step 1 Select your system
25 3 Press OK or to enter [System] menu. 4 Press to select your countr y or region. 5 Press OK to confirm. 6 Press to return to [Channel install.] menu. Step 2 Search and store new TV channels 1 Press MENU . 2 Press to select [Setup] > [Installation] > [Channel install.] > [Analogue: Manual]...
Page 28 - Step 3 Fine-tune analogue channels; Rename channels
26 Reorder channels After you install channels, you can rearrange the order in which they appear. 1 When watching T V, press OK to display the channel grid . 2 Press OPTIONS . The channel options menu appears. » 3 Press to select [Reorder] and then OK to return to the channel grid. 4 Press to select...
Page 29 - Connect
27 a PC IN ( VGA and AUDIO IN) Audio and video input from a computer. b EXT 2 ( Y Pb Pr and AUDIO L /R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. VGA VGA PC IN(AUDIO) 7 Connect devices This section describes how to connect various devices w...
Page 32 - Side connector
30 a COMMON INTERFACE Slot for a Conditional Access Module (CAM). b AUDIO L /R Audio input from analogue devices connected to VIDEO . c VIDEO Composite video input from analogue devices such as VCRs. d USB Data input from USB storage devices. d T V ANTENNA Signal input from an antenna, cable or sate...
Page 33 - Connect a computer
31 • DVI-HDMI cable • HDMI cable and HDMI-DVI adaptor • VGA cable DVI LEFT / RIGHTHDMI 1 / DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger For TV of size 19-22 inch DVI LEFT / RIGHTHDMI 1 / DVI AUDIO IN : PC IN(AUDIO) For TV of size 26 inch and larger For TV of size 19-22 inch VGA VGA ...
Page 34 - Access CAM services; Use Philips EasyLink; Enable or disable EasyLink; Insert and activate a CAM
32 Access CAM services 1 Af ter inser ting and activating the CAM, press MENU . 2 Press to select [Setup] > [Features] > [Common interface] . Applications provided by the digital TV » ser vice operator appear on the screen. Note This menu option is available only if the CAM • is inser ted and ...
Page 35 - Use one-touch standby; Use a Kensington lock
33 Use one-touch standby 1 Press and hold Standby on the T V ’s or device’s remote control for at least three seconds. The TV and all connected HDMI » devices switch to standby. Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington loc...
Page 36 - Supported TV mounts; Product; Supported display resolutions; Multimedia
34 Tuner/Reception/Transmission Aerial input: 75ohm coaxial (IEC75) • DVB: DVB Terrestrial, DVB -T MPEG4 • (only in some models)T V system: DVB COFDM 2K /8K; PAL I, • B/G , D/K; SECAM B/G , D/K , L /L’ Video playback : NTSC , SECAM, PAL • Tuner Bands: Hyperband, S -channel, UHF, • VHF Remote control...
Page 37 - Troubleshooting; General TV issues
35 TV channel issues Previously installed channels do not appear in the channel list: Check that the correct channel list is • selected. No digital channels were found during the installation: Check that the T V suppor ts DVB -T or • DVB -C in your countr y. See the listed countries on the back of t...
Page 38 - Computer connection issues; Contact us; Sound issues; HDMI connection issues
36 If a HDMI-to-DVI adaptor or HDMI to • DVI cable is used, check that an additional audio cable is connected to AUDIO L /R or AUDIO IN (mini-jack only). Computer connection issues The computer display on the TV is not stable: Check that a suppor ted resolution and • refresh rate is selected on the ...
