Philips 21PV548/07 - Manual

Initial installation a After you have connected the aerial, confirm the pictureon the TV screen with OK on the remote control. ’Autoinstall’ starts. This picture will appear on the screen: AUTO INSTALL SEARCHING ƒƒƒƒƒƒƒ__________________ PLEASE WAIT... Wait until all TV channels have been found. Thi...

Manual TV channel search In certain cases the ’Automatic TV channel search’ may not beable to find all of the TV channels (e.g. coded TV channels). Inthat case, use this manual method to set the channels. a Press the MENU button on the remote control. The main menu will appear. b Select the line ’ M...

Selecting a TV channel Select the required TV channel (= the programme number)with the ; P q , = P r buttons or with the digit buttons 0..9 on the remote control. D The connected decoder can only be used for one TVprogramme. If you would like to switch to a differentTV channel which also requires th...

Automatic volume control(Automatic Volume Leveller AVL) The function ’Automatic Volume Leveller’ (AVL) regulates thevolume automatically. This will minimise sudden changes in TVvolume, e.g. when commercial spots are being transmitted orwhen switching TV channels. a To switch this function on, select...

General information E We suggest that, from now on, you switch off yourTV-Video Combi with the m button on the front of the set or with the STANDBY m button on the remote control. When the set is in the standby mode, a small red lamp( STANDBY 5 ) at the front of the set will be alight. E You can swi...

Summary of user guide The OSD menu offers the following functions. More details on each can be found in the appropriate chapter. MAIN MENU TV SETTINGS X SPECIAL SETTINGSCLOCKAUTO INSTALLMANUAL SEARCHTV CHANNEL ALLOC.WAKE UP EXIT: MENU CONTINUE: p Main menu User guide (OSD) The OSD (On-screen display...

Playing a pre-recorded cassette a Put a cassette into the cassette slot (see illustration). Thecassette will be pulled in automatically. b Press the button PLAY G to play the cassette. The screen displays for example: 0:00 TIME USED c To stop, press the STOP h button. d To eject the cassette, press ...

Searching for tape position with the picture(picture search) a While a cassette is playing, press the H (reverse) or I (forward) button once or several times. The screen displays for example: 0:00 TIME USED b To stop at the desired position, press the PLAY G button. D The picture quality is lessened...

Eliminating picture interference (tracking) If the picture quality is poor during playback, you can manuallyadjust the tracking. a Press and hold the button ; P q or = P r during playback until the playback quality reaches its best.’ T+ ’ will appear on the screen when the button ; P q is pressed. ’...

Use the ’Manual recording’ function to spontaneously startrecording (e.g. to record a TV show already in progress). E Please refer to section ’Recording without automatic switch-off’ , if you want to manually start and stop your own recording. E Please refer to section ’Recording with automatic swit...

Programming a recording(without ’VIDEO Plus+’) a Press the TIMER k button on the remote control twice . The free TIMER block will be highlighted. b Press the TIMER k button. The current information will appear on the screen. TIMER PROGRAMMING VPS DATE REP. PROG. START PDC END 01 ONCE 01 20:15 ] 21:3...

Parental control (Child lock) This function protects your TV-Video Combi from unwanteduse. All button functions on the front of the machine areblocked. D Programmed recordings will still be recorded (inspite of the parental control) and cannot beinterrupted. a Please make sure the TELETEXT decoder i...

Continuous playback of a cassette You can play a cassette continuously. As soon as the end ofthe cassette or end of the recording is reached (30 seconds ofblank tape), it is rewound to the beginning and the playbackstarts over again. D Please make sure the TELETEXT decoder isswitched off using the b...

If you encounter problems with your TV-Video Combi, thesecould be caused by one of the following. You can also call the customer service centre in your country. The telephone number is listed in the enclosed warrantyinformation packet or on the last page of the manual cover.Have the model number (MO...

’Smart Clock’ setting does not work: • You have stored a TV channel on programme number ’ P01 ’ that does not transmit TELETEXT: On ’ P01 ’ store a TV channel that transmits TELETEXT. • Poor TELETEXT reception: Store a TV channel on ’ P01 ’ with good TELETEXT reception. • You have not activated the ...

Technical terms used Current tape position The part of the tape currently being played. External source A device connected via a socket (e.g.: scart socket) whichtransmits audio/video signals to the TV-Video Combi. Index code A code which is automatically recorded on the tape at thebeginning of ever...