Page 2 - Safety and Troubleshooting Information; Safety Precautions and Maintenance; Safety precautions and maintenance; RETURN TO TOP OF THE PAGE
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this doc...
Page 3 - About This Electronic User's Manual; About This Guide; Other Documents You May Need; Electronic User's Guide
About This Electronic User's Manual About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, opera...
Page 4 - Notational Descriptions
About This Electronic User's Manual RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in ital...
Page 6 - Product Information; Product Features; sRGB; Technical Specifications*
202P Product Information Product Information Product Features • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features Model Regulation Color 202P40 TCO'03 Gray 202P45 TCO'99 Silver/Black 202P4: ● 22-inch (20.0" VIS) Real Flat...
Page 7 - SCANNING
202P Product Information • Dot pitch / Grille pitch 0.24 mm • Horizontal pitch • Tube type Aperture grille, flat, high contrast, anti-glare, anti-static, anti reflection • Phosphor B22 • Recommended display area 15.4" x 11.6" / 392 x 294 mm • Maximum display area 16.0" x 12.0" / 406 ...
Page 8 - For more information on sRGB, please visit:; Automatic Power Saving; Power Management Definition
202P Product Information sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.) Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB e...
Page 9 - PHILIPS; Physical Specifications; * These information are subject to change without notice.
202P Product Information VESA's Mode Video H-sync V-sync Power Used Power Saving (%) LED color ON Active Yes Yes Typical 125 W 0 % Green OFF Blanked No No < 1W 99 % Yellow This monitor is E NERGY S TAR ® compliant. A s an E NERGY S TAR ® P artner, PHILIPS has determined that this product meets th...
Page 10 - Pin Assignment; Pin
202P Product Information RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No. Assignment Pin No. Assignment 1 Red video input 9 +5V (PC) 2 Green video input&SOG 10 Logic ground 3 Blue video input 11 Identical output - connected to ...
Page 11 - Views; Front View
202P Product Information Views Follow the links to see various views of the monitor and its components. Front View Rear View RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19/edoc/english/202P/PRODUCT/PRODUCT.HTM (6 of 6)7/19/2004 4:25:40 PM
Page 12 - Installing your Monitor; Power button switches your monitor on.
Installing your Monitor Installing your Monitor Front View • Rear View Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls file:///D|/EDFU/crt_19/edoc/english/INSTALL_4/INSTALL.HTM (1 of 4)7/19/2004 4:25:41 PM
Page 13 - Rear View
Installing your Monitor Contrast hotkey. When the UP arrow is pressed, the adjustment controls for the CONTRAST will show up. UP and DOWN buttons are used when adjusting the OSD of your monitor Brightness hotkey. When the RIGHT arrow is pressed ,the adjustment controls for BRIGHTNESS will show up. L...
Page 14 - Other end connects to your PC.
Installing your Monitor 1. D-Sub Port - Attach the D-Sub connector that comes with your monitor here. Other end connects to your PC. 2. Power in - Attach power cable here. file:///D|/EDFU/crt_19/edoc/english/INSTALL_4/INSTALL.HTM (3 of 4)7/19/2004 4:25:41 PM
Page 15 - BNC Connectors - Attach the connectors here to get the best video
Installing your Monitor 3. BNC Connectors - Attach the connectors here to get the best video performance from your monitor. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19/edoc/english/INSTALL_4/INSTALL.HTM (4 of 4)7/19/2004 4:25:41 PM
Page 16 - Description of the On Screen Display; Basic and simple instruction on the control keys.
On-Screen Display On-Screen Display Description of the On-Screen Display • The OSD Tree • The OSD Controls Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly though a...
Page 17 - The OSD Tree
On-Screen Display RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below....
Page 20 - Customer Care & Warranty
Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland...
Page 21 - Frequently Asked Questions; What is Philips Monitors USB hub solution?
Frequently Asked Questions Frequently Asked Questions 1. What does the "Designed for Windows" logo signify? The "Designed for Windows" logo means your Philips monitor fulfills the requirements and recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WH...
Page 23 - How do I enable the energy saving function?
Frequently Asked Questions Energy Saving: MPRII: No requirement.TCO92: Standby mode < 30W, Off mode < 8WTCO95: Standby mode < 30W, Off mode < 8WTCO99: Standby mode < 15W, Off mode < 5WTCO'03:Standby mode < 15W, Off mode < 5W Visual Ergonomics: MPRII: No requirement.TCO92: No ...
Page 24 - Why does the picture on the screen appear to flicker?; Verify that the proper drivers are installed for your video card; How can I adjust the size, position and rotation of my screen?
Frequently Asked Questions "Refresh rate" describes the number of times an entire screen is vertically scanned each second. In other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times per second. A higher the refresh rate means better imag...
Page 25 - , the user experiences TV quality; Why is LightFrame important to me?
Frequently Asked Questions Simply press OK button then select "Reset to factory settings" to restore all settings. 16. What is LightFrame ? LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor 's brightness and sharpness. Wit...
Page 26 - Will LightFrame shorten the life of a monitor?; will function properly.
Frequently Asked Questions 19. Will anyone else have this? LightFrame was invented, developed and patented by Philips. It is a unique feature that you will find exclusively in Philips monitors. 20. Will LightFrame shorten the life of a monitor? No. Extensive testing has confirmed LightFrame does not...
Page 27 - hardware equipped monitor; How did Philips achieve XtraSpace Design?
Frequently Asked Questions Philips exclusive LightFrame feature requires the combined operation of hardware that resides in your monitor and software installed on your system. It only works when a monitor with built-in hardware receives commands from system software. Without both the LightFrame TM h...
Page 28 - Which models can be incorporated with the Multimedia Base?; Please contact your dealer/reseller for details.
Frequently Asked Questions 26. Which models can be incorporated with the Multimedia Base? The following models can be incorporated with the Multimedia Base: 109B5, 109E5,109F5, 107B5, 107E5,107F5, 107S5, 107T5. 27. What are Philips Multimedia Base's specifications? See detailed Multimedia Base speci...
Page 29 - How does Philips Auto Calibrate feature benefit me?
Frequently Asked Questions of years, the monitor's brightness deteriorates to below 50% of its original value. At this stage, the usable life of a monitor is considered ended. Auto Calibrate regularly readjusts color temperature and luminance to their original values. 31. How does Philips Auto Calib...
Page 30 - My screen shows NO SYNC INPUT , how can I get rid of this?; Check the following for possible solutions:; What is Moire? Why does my monitor have this wavy phenomenon?
Frequently Asked Questions Auto Calibrate is currently available in the new 201P, 201B and 109P. 35. The Main Menu displays OSD MAIN MENU LOCKED . Pressing the front control panels hasno effect. How can I unlock this function? Press and hold the OSD menu key for about 10 seconds until picture displa...
Page 31 - Set color temperature to 9300 color coordination
Frequently Asked Questions ● Some monitors have a Moire cancellation feature, activate it to the on position or adjust the Moire cancellation function via the OSD on the monitor. ● Change resolution to the recommended standard for the specific monitor size. ● Change Window viewing pattern/scheme to ...
Page 32 - How do I adjust the picture on the screen?
Frequently Asked Questions 42. How do I adjust the picture on the screen? Please perform the following to correct the picture image: ● Reset your monitor via the OSD menu ● Adjust the Horz (width) and/or Vert size (height) in the OSD ● Change monitor timing to work at the recommended resolution 43. ...
Page 33 - How can I increase the color display of my monitor?; Check that the power button is switched on.
Frequently Asked Questions 45. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the...
Page 34 - increase Contrast and then press and hold the
Frequently Asked Questions 49. Why is there no picture on my monitor even though the power LED is green? ● Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to increase Contrast and then press and hold the 4 (+) button to increase Brightness. These butt...
Page 35 - Glossary; J K; Balanced pincushion; See Geometric distortion; BNC connection
Glossary Glossary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus ope...
Page 36 - CE Mark
Glossary RETURN TO TOP OF THE PAGE C CE Mark CE mark is displayed on products per EMC and LV ( low Voltage Device ) directives in compliance with European Community safety, EMI and EMS requirements and is compulsory on products for sale in the European Community. Color temperature A way of describin...
Page 37 - Convergence error; Points where convergence error is specified; Convergence-error correction
Glossary a picture is set by the brightness of the unexcited phosphor, which is governed by the degree with which ambient light is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other ...
Page 39 - DDC 2Bi
Glossary DDC 1/2B See DDC. DDC 2Bi See DDC. Degaussing The procedure of demagnetizing the shadow mask and associated metal parts of a picture tube at switch-on to minimize picture distortion. This is usually accomplished by means of a special degaussing coil through which a decaying alternating curr...
Page 40 - Dot rate; Also known as video dot rate.; Electromagnetic radiation standards
Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to li...
Page 41 - TCO; Flicker
Glossary two important standards both derived from regulations originally laid down by Swedish authorities. MPR-II The standard originally proposed by the Swedish National Board of Measurement and Testing. It set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopt...
Page 42 - Hertz; INF File
Glossary problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age. RETURN TO TOP OF THE PAGE H Hertz The unit of frequency named after the physicist Heinri...
Page 44 - Linearity; See Horizontal scanning frequency.; Low-frequency electric and magnetic fields
Glossary L Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic...
Page 45 - See also; Moiré effect; See Electromagnetic radiation standards.; MultiSync monitor; See Autoscan monitor.
Glossary Alternating fields generated by the deflection yoke. These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the princip...
Page 46 - Overscan
Glossary N Non-interlaced See Interlaced/non-interlaced. RETURN TO TOP OF THE PAGE O OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan Th...
Page 47 - See Geometric distortion.
Glossary Parallelogram Distortion See Geometric distortion. Phosphor Generic name for the class of substances that exhibit luminescence. To produce a picture on screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into luminescence by the electron beam. Typical...
Page 48 - Raster; The area on screen that electron beam can reach.; Refresh rate; See Vertical scanning frequency.; Resolution; See also video graphic adapter.; Rotation function
Glossary Plug-and-Play See DDC. See USB section. RETURN TO TOP OF THE PAGE R Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number of pixels ...
Page 49 - Screen coatings
Glossary S Screen coatings Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a conductive coating deposited on the screen (or on a glass panel...
Page 50 - The ARAS coating reflects only about 0.5% of the incident light.; Shape
Glossary ARAS is one of the most effective anti-reflection/anti-static screen treatments currently available. It is composed of a multi-layer structure of transparent dielectric material that suppresses specular reflections by broadband interference effects at the screen surface. Anti-static propert...
Page 52 - Tilt function; See rotation function.; Trapezoid distortion; See Geometrical distortion.; TTL signal; USB or Universal Serial Bus; A smart plug for PC peripherals.
Glossary T TCO See Electromagnetic radiation standards. Tilt function See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue s...
Page 53 - Hub
Glossary ● USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals. ● USB does away with "port gridlock." Without USB, PCs are normally limited ...
Page 54 - Downstream
Glossary for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical. Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic f...
Page 56 - Super VGA
Glossary A card equipped with a character or graphic generator and video memory, which maps to the screen. A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor. These cards comply with various standards that determine the...
Page 57 - Download and Print; Adobe® Acrobat Reader for PC; Download instructions:; To download the file:; Printing instructions:
Download and Print Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe¨ Acrobat Reader installed, click on the link to install...
Page 59 - Troubleshooting; Common Problems
Troubleshooting Troubleshooting Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this problem? Check these items No Picture (Power LE...
Page 61 - For further assistance, refer to the
Troubleshooting For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19/edoc/english/202P/SAFETY/saf_troub.htm (3 of 3)7/19/2004 4:25:56 PM
Page 62 - Regulatory Information; Why do we have environmentally labeled computers?
Regulatory Information Regulatory Information TCO'99 Information • TCO'99 Environmental Requirements • TCO'03 Information • Recycling Information for Customers • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale ...
Page 63 - What does labeling involve?; TCO Development
Regulatory Information recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) ...
Page 64 - Environmental Requirements; Flame retardants
Regulatory Information Current information regarding TCO' 99 approved and labeled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ RETURN TO TOP OF THE PAGE Environmental Requirements Flame retardants Flame retardants are present in printed circuit boards, ...
Page 66 - Some of the features of the TCO'03 Display requirements.
Regulatory Information Some of the features of the TCO'03 Display requirements. Ergonomics ● Good visual ergonomics and image quality in order to improve the working environmentfor the user and to reduce sight and strain problems. Important parameters are luminance,contrast, resolution, reflectance,...
Page 67 - For more information, please visit; Recycling Information for Customers; For help and service, please contact
Regulatory Information For more information, please visit www.tcodevelopment.com RETURN TO TOP OF THE PAGE Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activ...
Page 68 - CE Declaration of Conformity
Regulatory Information Ms. Delmer F. TeglasPhilips Electronics North AmericaE-mail: [email protected] Tel: +1 865 521 4322 RETURN TO TOP OF THE PAGE CE Declaration of Conformity ● Philips Consumer Electronics declare under our responsibility that the product is in conformity with the followin...
Page 69 - Energy Star Declaration
Regulatory Information Energy Star Declaration PHILIPS 202P4* This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the req...
Page 70 - Reorient or relocate the receiving antenna.; Commission Federale de la Communication (FCC Declaration)
Regulatory Information harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the ...
Page 71 - corriger la situation en prenant les mesures suivantes:; EN 55022 Compliance (Czech Republic Only)
Regulatory Information corriger la situation en prenant les mesures suivantes: ● Réorienter ou déplacer l'antenne de réception. ● Augmenter la distance entre l'équipement et le récepteur. ● Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur. ● Demander l'aide du marchand o...
Page 72 - Class B ITE; Class B Device
Regulatory Information VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio I...
Page 73 - environment, including residential areas.; Polish Center for Testing and Certification Notice
Regulatory Information environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor...
Page 74 - North Europe Information (Nordic Countries); Placering/Ventilation
Regulatory Information RETURN TO TOP OF THE PAGE North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. file:///D|/EDFU/crt_19/edoc/english/202P/SAFETY/regs/regulat.htm (13 of 17)7/...
Page 77 - Information for UK only
Regulatory Information Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. RETURN TO TOP OF THE PAGE Information for UK only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug...
Page 78 - How to connect a plug; or coloured GREEN or GREEN AND
Regulatory Information How to connect a plug The wires in the mains lead are coloured in accordance with the following code: BLUE - "NEUTRAL" ("N") BROWN - "LIVE" ("L") GREEN & YELLOW - "EARTH" ("E") 1. The GREEN AND YELLOW wire must be connected t...
Page 79 - Other Related Information
Other Related Information Other Related Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Information for Users in the U. S . • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consist...
Page 80 - The OSD Controls; BRIGHTNESS; Smart
The OSD Controls The OSD Controls Description of the On-Screen Display • The OSD Tree The OSD Controls : Brightness (HotKey) • Contrast (HotKey) • Language • Input Signal Selection • Zoom • Adjust Horizontal • Adjust Vertical • Adjust Shape • Adjust Color • Reset to Factory Settings • Extra Controls...
Page 81 - CONTRAST
The OSD Controls RETURN TO TOP OF THE PAGE CONTRAST To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. 1) Press the or button on the monitor. The CONTRAST window appears. 2) Press the o...
Page 82 - LANGUAGE; button on the monitor. The MAIN CONTROLS window appears. LANGUAGE
The OSD Controls LANGUAGE The ON SCREEN DISPLAY shows its settings in one of five languages. The default is English, but you can select French, Spanish, German, or Italian. 1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE should be highlighted. 2) Press the button again...
Page 83 - button until; INPUT SIGNAL SELECTION; button on the monitor. The MAIN CONTROLS window appears.
The OSD Controls 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted... Smart Help After returning to MAIN CONTROLS . . . . . . to continue to INPUT SIGNAL SELECTION, press the button until INPUT SIGNAL SELECTION is highlighted. N...
Page 84 - button. The INPUT SIGNAL SELECTION window appears.; button until ZOOM is highlighted.
The OSD Controls 3) Press the button. The INPUT SIGNAL SELECTION window appears. 4) Press the or button to highlight INPUT B or INPUT A. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN C...
Page 85 - ZOOM
The OSD Controls RETURN TO TOP OF THE PAGE ZOOM ZOOM increases or decreases the size of the images on your screen. To adjust the ZOOM follow the steps below. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button. The ...
Page 86 - or; button until ADJUST; ADJUST HORIZONTAL
The OSD Controls 4) Press the or button to adjust ZOOM. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST HORIZONTAL, press the button until ADJU...
Page 88 - ) To adjust the horizontal size, press the; ADJUST VERTICAL
The OSD Controls 6) To adjust the horizontal size, press the or button. 7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST VERTICAL, press the button ...
Page 90 - press the; ADJUST SHAPE; ADJUST SIDE CURVE
The OSD Controls press the to highlight SIZE. 6) To adjust the vertical size, press the or button. 7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST ...
Page 93 - ADJUST SIDE ANGLES
The OSD Controls Smart Help After returning to MAIN CONTROLS . . . ...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDE ANGLES and follow the directions. ...to exit completely, press the button twice. ...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then pres...
Page 95 - the; ROTATE IMAGE
The OSD Controls 8) To adjust the parallelogram, press the or button. 9) When the parallelogram is adjusted, press the button to return to the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted. 10) Press the button to return to the MAIN CONTROLS window, or press the button until ROTATE I...
Page 97 - ADJUST COLOR
The OSD Controls 6) To adjust the rotation, press the or button. 7) When the rotation is adjusted, press the button to return to the ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted. 8) Press the button to return to MAIN CONTROLS. Smart Help After returning to MAIN CONTROLS . . . . ....
Page 100 - button; RESET TO FACTORY SETTINGS
The OSD Controls Smart Help After returning to MAIN CONTROLS. . . . . . to continue to RESET TO FACTORY SETTINGS, press the button until RESET TO FACTORY SETTINGS is highlighted. Next, start with step 3 under RESET TO FACTORY SETTINGS. . . . to exit completely, press the button. RETURN TO TOP OF THE...
Page 101 - button. The RESET TO FACTORY SETTINGS window appears.; button until EXTRA
The OSD Controls 3) Press the button. The RESET TO FACTORY SETTINGS window appears. 4) Press the or button to select YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLO...
Page 102 - EXTRA CONTROLS; DEGAUSS
The OSD Controls . . . to exit completely, press the button. RETURN TO TOP OF THE PAGE EXTRA CONTROLS DEGAUSS EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen. 1) Press the button on the monitor. The M...
Page 103 - button to highlight DEGAUSS.; ADJUST MOIRE
The OSD Controls 4) Press the button to highlight DEGAUSS. 5) To degauss your screen, press the button. Your screen will be degaussed, then the MAIN CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted. Smart Help After returning to MAIN CONTROLS . . . . . . to continue to ADJUST M...
Page 104 - button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be
The OSD Controls 2) Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted. 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted. file:///D|/EDFU/crt_19/edoc/english/OS...
Page 106 - CLOSE MAIN CONTROLS
The OSD Controls CLOSE MAIN CONTROLS RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19/edoc/english/OSD/osd_cont.htm (27 of 27)7/19/2004 4:26:17 PM
Page 107 - Your Philips F1rst Choice Warranty; Thank you for purchasing this Philips monitor.; Warranty coverage begins as from the day you buy your monitor.
F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while install...
Page 108 - Just a click away
F1rst Choice Warranty ● Repairs or product modifications and alterations have been executed by unauthorized service organizations or persons; ● Damage is caused by accidents including but not limited to lightning, water or fire, misuse or neglect; ● Reception problems caused by signal conditions or ...
Page 109 - F1rst Choice Contact
F1rst Choice Warranty Having the following information available will also help speed up the process: ● Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. ● The full address to which the faulty monitor has to be collected and the swap model should be d...
Page 110 - Your International Guarantee; The Philips guarantee may not apply if:
International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and repl...
Page 112 - Philips F1rst Choice Warranty; Click here to access the; Warranty coverage begins the day you buy your product.
United States Guarantee Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while installing...
Page 113 - Your warranty does not cover:; Where IS SERVICE AVAILABLE?
United States Guarantee When the warranty on the original product expires, the warranty on all replaced and repaired products and parts also expires. WHAT IS EXCLUDED? Your warranty does not cover: ● labor charges for installation or setup of the product, adjustment of customer controls on the produ...
Page 114 - Philips Customer Care Center
United States Guarantee TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS... Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing: Philips Customer Care Center (877) 835-1838 or (919) 573-7855 (In U.S.A., Puerto Ri...
Page 115 - Philips type number; Just a phone call away
United States Guarantee This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Before contacting Philips, please prepare the following details so we can solve your problem quickly. ● Philips type number ● Philips serial number ● Pur...
Page 116 - F1rst Choice Contact Information
F1rst Choice Contact Information F1rst Choice Contact Information Telephone numbers: Austria 01 546 575 603 Belgium 02 275 0701 Cyprus 800 92256 Denmark 35 25 87 61 France 03 8717 0033 Germany 0696 698 4712 Greece 00800 3122 1223 Finland 09 2290 1908 Ireland 01 601 1161 Italy 02 48 27 11 53 Luxembou...
Page 117 - Consumer Information Centers; Eastern Europe; CZECH REPUBLIC
Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Brasil • Canada • Chile • China • Colombia • Czech Republic • Dubai • Egypt • Hong Kong • Hungary • Slovakia • Slovenia • India • Indonesia • Japan • Korea • Malaysia • Mexico • Morocco • New Ze...
Page 118 - SLOVENIA; Latin America; ANTILLES
Consumer Information Centers SLOVENIA PC HAND Brezovce 10 SI - 1236 Trzin Tel: +386 1 530 08 24Email: [email protected] POLAND Zolterul.Zytnia 1 PL - 05-500 Piaseczno Tel:+48 22 7501766Email: [email protected] RUSSIA Tel: +7 095 961-1111Tel: 8-800-200-0880 Web-site: www.phili...
Page 119 - ARGENTINA
Consumer Information Centers ARGENTINA Vedia 3892 Capital FederalCP:1430 Buenos AiresPhone: (011)-4544 2047Fax: (011)-4544 2928 BRASIL Philips da Amazonia Ind. Elet.Ltda. Av.Luis Carlos Berrini,1400-Sao Paulo-SPPhone: 0800-7010-203 CHILE Philips Chilena S.A.Avenida Santa Maria 0760P.O. box 2687Santi...
Page 120 - PARAGUAY; Canada
Consumer Information Centers PARAGUAY Philips del Paraguay S.A.Avenida Artigas 1513Casilla de Correos 605AsuncionPhone: (021)-211666Fax : (021)-213007 PERU Philips Peruana S.A.Customer DeskComandante Espinar 719Casilla 1841Limab18Phone: (01)-2136200Fax : (01)-2136276 URUGUAY Ind.Philips del Uruguay ...
Page 121 - CANADA; Pacific; AUSTRALIA; Asia; BANGLADESH
Consumer Information Centers CANADA Philips Electronics Ltd.281 Hillmount Road Markham Ontario,L6C 2S3Phone: 800- 479-6696Fax:905-887-3974 Pacific AUSTRALIA Philips Consumer Service.Customer Information Centre.3 Figtree DriveHomebush Bay NSW 2140Phone: CIC:1300 363 391, PCE Service:1 300-361 392Fax:...
Page 122 - CHINA
Consumer Information Centers CHINA SHANHAINo. 1102 wuding road, jing an district,200040 Shanghai,P.R. ChinaPhone: 800 820 5128 (Toll Free)Fax:21-65610647 NANJINGNo. 12-2 dong da ying bei, zhu jiang road,210018 Nanjing,P.R. ChinaPhone: 800 820 5128 (Toll Free)Fax:21-65610647 HANGZHOUNo. 20 jiao gong ...
Page 123 - HONG KONG
Consumer Information Centers 510070 Guangzhou,P.R. ChinaPhone: 800 820 5128 (Toll Free)Fax:21-65610647 SHENZHENRoom 603, electronic BLD, No. 30 Shen nan zhong road,518031 Shenzhen,P.R. ChinaPhone: 800 820 5128 (Toll Free)Fax:21-65610647 CHANGSHARoom 18, He yi computer city, chao yang road,Changsha,P...
Page 124 - INDIA
Consumer Information Centers INDIA BOMBAYPhilips IndiaCustomer Relation CentreBandbox House254-D Dr. A Besant Road, WorliBombay 400 025Phone: (020)-712 2048 ext 2765 Fax: (020)-712 1558 CALCUTTACustomer Relation Centre7 justice Chandra Madhab RoadCalcutta 700 020Phone: (020)-712 2048 ext 2765 Fax: (...
Page 125 - JAPAN
Consumer Information Centers JAPAN Philips Consumer Electronics1-11-9,EbisuminamiShibuya-KuTokyo 150Phone: (03)-3719-2235Fax : (03)-3715-9992 KOREA Philips Korea Ltd.Philips HouseC.P.O. box 3680260-199, Itaewon-Dong.Yongsan-Ku, Seoul 140-202Phone: 080 600 6600 (Toll Free)Fax:(02)709 1245 MALAYSIA Ph...
Page 126 - PHILIPPINES; Africa
Consumer Information Centers Fax:(021)-772 1167 PHILIPPINES Philips Electronics and Lighting Inc.106 Valero St., Salcedo VillageMakati, Metro Manilla.Phone: (02)-888 0572 , Domestic Toll Free:1-800-10-PHILIPS or 1-800-10-744 5477Fax:(02)-888 0571 SINGAPORE Philips Singapore Private Ltd.Consumer Serv...
Page 127 - MOROCCO; Middle East; DUBAI
Consumer Information Centers MOROCCO Philips Electronique Maroc304,BD Mohamed VCasablancaPhone: (02)-302992Fax : (02)-303446 SOUTH AFRICA South African Philips.S.V. Div. 195 Main R.D.Martindale., JohannesburgP.O.box 58088Newville 2114Phone: (011)-4715000Fax : (011)-4715020 Middle East DUBAI Philips ...
Page 129 - It Takes Only A Moment To; PROTECT YOUR INVESTMENT.; SIMPLY MAIL THE CARD BELOW TO RECEIVE ALL; WARRANTY VERIFICATION; OWNER CONFIRMATION; MODEL REGISTRATION; WARRANTY; IMPORTANT - RETURN WITHIN TEN DAYS
It Takes Only A Moment To PROTECT YOUR INVESTMENT. Congratulations on investing in a Philips product. It’s an important and intelligent decision that’s sure to reward youfor many years to come. To ensure you’ll get all of the privileges and protection that come with your purchase,please complete you...
Page 130 - Warranty Verification; See Inside For; Warranty; MATERIAL; IMPORTANT
RETURN THE ATTACHED CARD WITHIN TEN DAYS TO ENSURE YOUR: ✓ Warranty Verification ✓ Owner Confirmation ✓ Model Registration See Inside For ValuableBenefits! Warranty Registration Card PO BOX 1533 DEPOSIT NY 13754-1533 PLEASE APPLY FIRST CLASS STAMP TIME-DATED MATERIAL Please Open Promptly! a !1375415...