Page 2 - Safety and Troubleshooting Information; Safety Precautions and Maintenance; Safety precautions and maintenance; RETURN TO TOP OF THE PAGE
Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this doc...
Page 3 - About This Electronic User's Manual; About This Guide; Other Documents You May Need; Electronic User's Guide
About This Electronic User's Manual About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, opera...
Page 4 - Philips Color Monitor Quick Start Guide; Notational Descriptions
About This Electronic User's Manual ● Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is included with this product. RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document. ...
Page 6 - Product Information; Product Features; LightFrameTM for Windows; Introduction
109F Product Information Product Information Product Features • LightFrame™ for Windows • Lead-free product • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features Model Regulation Color 109F51 MPRII Gray 109F57 MPRII Blue/Silver...
Page 7 - Language Selection
109F Product Information on the front of the monitor. This software is not designed for use with LCD flat screen monitors. LightFrame™ will work with true Windows-based programs and DOS-based programs that operate in a Windows environment. It will not work with DOS-based programs operating only in a...
Page 8 - Compatibility; Q:Can I upgrade my current Philips monitor to LightFrameTM 3?
109F Product Information Compatibility This version of LightFrame™ is compatible with Windows 95 Windows 98 Windows Me (Millenium Edition) Windows XP Windows 2000 Professional Edition. LightFrame™ 3 -- Frequently Asked Questions (and answers) LightFrame™ Q: Is LightFrame™ 2 compatible with LightFram...
Page 9 - Q:Can I install LightFrameTM 3 over an older version?
109F Product Information Q:Can I install LightFrame™ 3 over an older version? A: When you install LightFrame™ 3 the setup wizard will scan your system to check if you have an older version installed. If so, the setup wizard will remove that version before continuing with the installation of the new ...
Page 10 - Q:Can I activate LightFrameTM on my entire screen?
109F Product Information windows enhanced. You can only select windows with in the same application. The cross indicates that you move into an area where you cannot make a selection. Q:Can I use LightFrame™ with Netscape? A: You can use LightFrame™ with Netscape, but its functions are limited to man...
Page 11 - Technical Specifications*
109F Product Information RETURN TO TOP OF THE PAGE Lead-free product Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Philips compli...
Page 12 - WHITE COLOR TEMPERATURE
109F Product Information • Input signal levels 0.7 Vpp • Sync input signal Separate sync Composite sync • Sync polarities Positive and negative WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: • at 9300 degrees K x = 0.283 / y = 0.297 • at 6500 degrees K x = 0.313 / y = 0.329 sRGB sRGB is a sta...
Page 13 - Automatic Power Saving; Power Management Definition; Physical Specifications
109F Product Information Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will aut...
Page 14 - Pin Assignment; Pin; Views
109F Product Information RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No. Assignment Pin No. Assignment 1 Red video input 9 No pin 2 Green video input 10 Logic ground 3 Blue video input 11 Identical output - connected to pin 10 4 I...
Page 15 - Front View
109F Product Information Front View Rear View RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19_5/edoc/english/109F/PRODUCT/PRODUCT.HTM (10 of 10)2005-04-21 ¤W¤È 09:36:20
Page 16 - Installing your Monitor; Power button switches your monitor on.
Installing your Monitor Installing your Monitor Front View • Rear View • 6G3B11 Multimedia Base (option) Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the "-" button is pressed, the adjustment controls f...
Page 17 - Rear View
Installing your Monitor "-" and "+" buttons, are used for adjusting the OSD of your monitor. RETURN TO TOP OF THE PAGE Rear View file:///D|/EDFU/crt_19_5/edoc/english/install_6/INSTALL.HTM (2 of 3)2005-04-21 ¤W¤È 09:36:21
Page 19 - Description of the On Screen Display; Basic and simple instruction on the control keys.
On-Screen Display On-Screen Display Description of the On-Screen Display • The OSD Tree • The OSD Controls Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through ...
Page 20 - The OSD Tree
On-Screen Display RETURN TO TOP OF THE PAGE The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below....
Page 23 - Customer Care & Warranty
Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland...
Page 24 - Frequently Asked Questions; What is Philips Monitors USB hub solution?
Frequently Asked Questions Frequently Asked Questions 1. What does the "Designed for Windows" logo signify? The "Designed for Windows" logo means your Philips monitor fulfills the requirements and recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WH...
Page 26 - How do I enable the energy saving function?
Frequently Asked Questions Energy Saving: MPRII: No requirement. TCO92: Standby mode < 30W, Off mode < 8W TCO95: Standby mode < 30W, Off mode < 8W TCO99: Standby mode < 15W, Off mode < 5W TCO'03:Standby mode < 15W, Off mode < 5W Visual Ergonomics: MPRII: No requirement. TCO92...
Page 27 - Why does the picture on the screen appear to flicker?; Verify that the proper drivers are installed for your video card; How can I adjust the size, position and rotation of my screen?
Frequently Asked Questions "Refresh rate" describes the number of times an entire screen is vertically scanned each second. In other words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times per second. A higher the refresh rate means better imag...
Page 28 - , the user experiences TV quality; Why is LightFrame important to me?
Frequently Asked Questions Simply press OK button then select "Reset to factory settings" to restore all settings. 16. What is LightFrame ? LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor 's brightness and sharpness. Wit...
Page 29 - Will LightFrame shorten the life of a monitor?; will function properly.
Frequently Asked Questions 19. Will anyone else have this? LightFrame was invented, developed and patented by Philips. It is a unique feature that you will find exclusively in Philips monitors. 20. Will LightFrame shorten the life of a monitor? No. Extensive testing has confirmed LightFrame does not...
Page 30 - hardware equipped monitor; How did Philips achieve XtraSpace Design?
Frequently Asked Questions Philips exclusive LightFrame feature requires the combined operation of hardware that resides in your monitor and software installed on your system. It only works when a monitor with built-in hardware receives commands from system software. Without both the LightFrame TM h...
Page 31 - Which models can be incorporated with the Multimedia Base?; Please contact your dealer/reseller for details.
Frequently Asked Questions 26. Which models can be incorporated with the Multimedia Base? The following models can be incorporated with the Multimedia Base: 109B5, 109E5,109F5, 107B5, 107E5,107F5, 107S5, 107T5. 27. What are Philips Multimedia Base's specifications? See detailed Multimedia Base speci...
Page 32 - How does Philips Auto Calibrate feature benefit me?
Frequently Asked Questions number of years, the monitor's brightness deteriorates to below 50% of its original value. At this stage, the usable life of a monitor is considered ended. Auto Calibrate regularly readjusts color temperature and luminance to their original values. 31. How does Philips Aut...
Page 33 - My screen shows NO SYNC INPUT , how can I get rid of this?; Check the following for possible solutions:; What is Moire? Why does my monitor have this wavy phenomenon?
Frequently Asked Questions Auto Calibrate is currently available in the new 201P, 201B and 109P. 35. The Main Menu displays OSD MAIN MENU LOCKED . Pressing the front control panels hasno effect. How can I unlock this function? Press and hold the OSD menu key for about 10 seconds until picture displa...
Page 34 - Set color temperature to 9300 color coordination
Frequently Asked Questions ● Some monitors have a Moire cancellation feature, activate it to the on position or adjust the Moire cancellation function via the OSD on the monitor. ● Change resolution to the recommended standard for the specific monitor size. ● Change Window viewing pattern/scheme to ...
Page 35 - How do I adjust the picture on the screen?
Frequently Asked Questions 42. How do I adjust the picture on the screen? Please perform the following to correct the picture image: ● Reset your monitor via the OSD menu ● Adjust the Horz (width) and/or Vert size (height) in the OSD ● Change monitor timing to work at the recommended resolution 43. ...
Page 36 - How can I increase the color display of my monitor?; Check that the power button is switched on.
Frequently Asked Questions 45. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal? This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the...
Page 37 - increase Contrast and then press and hold the
Frequently Asked Questions 49. Why is there no picture on my monitor even though the power LED is green? ● Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to increase Contrast and then press and hold the 4 (+) button to increase Brightness. These butt...
Page 38 - Glossary; J K; Balanced pincushion; See Geometric distortion; BNC connection
Glossary Glossary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus ope...
Page 39 - CE Mark
Glossary RETURN TO TOP OF THE PAGE C CE Mark CE mark is displayed on products per EMC and LV ( low Voltage Device ) directives in compliance with European Community safety, EMI and EMS requirements and is compulsory on products for sale in the European Community. Color temperature A way of describin...
Page 40 - Convergence error; Points where convergence error is specified; Convergence-error correction
Glossary a picture is set by the brightness of the unexcited phosphor, which is governed by the degree with which ambient light is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other ...
Page 42 - DDC 2Bi
Glossary DDC 1/2B See DDC. DDC 2Bi See DDC. Degaussing The procedure of demagnetizing the shadow mask and associated metal parts of a picture tube at switch-on to minimize picture distortion. This is usually accomplished by means of a special degaussing coil through which a decaying alternating curr...
Page 43 - Dot rate; Also known as video dot rate.; Electromagnetic radiation standards
Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to li...
Page 44 - TCO; Flicker
Glossary two important standards both derived from regulations originally laid down by Swedish authorities. MPR-II The standard originally proposed by the Swedish National Board of Measurement and Testing. It set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopt...
Page 45 - Hertz; INF File
Glossary problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age. RETURN TO TOP OF THE PAGE H Hertz The unit of frequency named after the physicist Heinri...
Page 47 - Linearity; See Horizontal scanning frequency.; Low-frequency electric and magnetic fields
Glossary L Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic...
Page 48 - See also; Moiré effect; See Electromagnetic radiation standards.; MultiSync monitor; See Autoscan monitor.
Glossary Alternating fields generated by the deflection yoke. These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the princip...
Page 49 - Overscan
Glossary N Non-interlaced See Interlaced/non-interlaced. RETURN TO TOP OF THE PAGE O OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan Th...
Page 50 - See Geometric distortion.
Glossary Parallelogram Distortion See Geometric distortion. Phosphor Generic name for the class of substances that exhibit luminescence. To produce a picture on screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into luminescence by the electron beam. Typical...
Page 51 - Raster; The area on screen that electron beam can reach.; Refresh rate; See Vertical scanning frequency.; Resolution; See also video graphic adapter.; Rotation function
Glossary Plug-and-Play See DDC. See USB section. RETURN TO TOP OF THE PAGE R Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number of pixels ...
Page 52 - Screen coatings
Glossary S Screen coatings Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a conductive coating deposited on the screen (or on a glass panel...
Page 53 - The ARAS coating reflects only about 0.5% of the incident light.; Shape
Glossary ARAS is one of the most effective anti-reflection/anti-static screen treatments currently available. It is composed of a multi-layer structure of transparent dielectric material that suppresses specular reflections by broadband interference effects at the screen surface. Anti-static propert...
Page 55 - Tilt function; See rotation function.; Trapezoid distortion; See Geometrical distortion.; TTL signal; USB or Universal Serial Bus; A smart plug for PC peripherals.
Glossary T TCO See Electromagnetic radiation standards. Tilt function See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue s...
Page 56 - Hub
Glossary ● USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals. ● USB does away with "port gridlock." Without USB, PCs are normally limited ...
Page 57 - Downstream
Glossary for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical. Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic f...
Page 59 - Super VGA
Glossary A card equipped with a character or graphic generator and video memory, which maps to the screen. A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor. These cards comply with various standards that determine the...
Page 60 - Download and Print; Adobe® Acrobat Reader for PC; Download instructions:; To download the file:; Printing instructions:
Download and Print Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe¨ Acrobat Reader installed, click on the link to install...
Page 62 - Troubleshooting; Common Problems
Troubleshooting Troubleshooting Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this problem? Check these items No Picture (Power LE...
Page 64 - For further assistance, refer to the
Troubleshooting For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19_5/edoc/english/109F/SAFETY/saf_troub.htm (3 of 3)2005-04-21 ¤W¤È 09:36:33
Page 65 - Regulatory Information; CE Declaration of Conformity
Regulatory Information Regulatory Information CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S. Only) • Commission Federale de la Communication (FCC Declaration) • EN 55022 Compliance (Czech Republic Only) • VCCI Class 2 Notice (Japan Only)...
Page 66 - Energy Star Declaration; PHILIPS
Regulatory Information Energy Star Declaration PHILIPS 109F5* This monitor is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS to fulfill the req...
Page 67 - Reorient or relocate the receiving antenna.; Commission Federale de la Communication (FCC Declaration)
Regulatory Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate...
Page 68 - Réorienter ou déplacer l'antenne de réception.; EN 55022 Compliance (Czech Republic Only)
Regulatory Information Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installat...
Page 69 - Class B ITE; Class B Device
Regulatory Information RETURN TO TOP OF THE PAGE VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environ...
Page 70 - Polish Center for Testing and Certification Notice
Regulatory Information Please note that this device has been approved for non-business purposes and may be used in any environment, including residential areas. RETURN TO TOP OF THE PAGE Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached...
Page 71 - North Europe Information (Nordic Countries); Placering/Ventilation
Regulatory Information RETURN TO TOP OF THE PAGE North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. file:///D|/EDFU/crt_19_5/edoc/english/109F/SAFETY/regs/regulat.htm (7 of 11)2...
Page 73 - Reparaturen nur durch Fachpersonal durchgeführt werden.
Regulatory Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit...
Page 74 - Information for UK only
Regulatory Information RETURN TO TOP OF THE PAGE Information for UK only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which s...
Page 75 - or by the Earth symbol
Regulatory Information BROWN - "LIVE" ("L") GREEN & YELLOW - "EARTH" ("E") 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW. 2. The B...
Page 76 - Other Related Information
Other Related Information Other Related Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Information for Users in the U. S . • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consist...
Page 77 - Description of the Controls; Bass button
6G3B11 Multimedia Base (option) 6G3B11 Multimedia Base (option) Front View • Rear View • Technical Specifications • Description of the Controls • Installing your Multimedia Base • Power adapter Installation Technical Specifications* • Output power 2 x 1.5W RMS / 36W PMPO • Bass Boost • Headphone con...
Page 78 - Installing your Multimedia Pedestal
6G3B11 Multimedia Base (option) C. Headphone jack Attach your headphones here. The loudspeakers will automatically switch off once headphones are connected. D. Microphone jack Attach your microphone here. E. Audio In Connect this to the audio output of your PC. F. MIC Out Connect this to the microph...
Page 79 - Power adapter Installation; There are two (2) ways of installing the adapter
6G3B11 Multimedia Base (option) 1. To INSTALL ● Slide the pedestal, aligning with the holes on the side. ● Then click the back hook into the corresponding hole on the bottom plate of your monitor. 2. To UN-INSTALL ● Lift the back hook from the hole on the bottom plate of your monitor. ● Slide out th...
Page 82 - The OSD Controls; BRIGHTNESS; CONTRAST
The OSD Controls The OSD Controls Description of the On-Screen Display • The OSD Tree The OSD Controls : Brightness (HotKey) • Contrast (HotKey) • Language • Zoom • Adjust Horizontal • Adjust Vertical • Adjust Shape • Adjust Color • Reset to Factory Settings • Extra Controls • Close Main Controls BR...
Page 83 - LANGUAGE
The OSD Controls To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. 1) Press the button on the monitor. The CONTRAST window appears. 2) Press the or button to adjust the contrast. 3) Wh...
Page 84 - or; ZOOM
The OSD Controls 3) Press the or button until the desired language is highlighted. 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. RETURN TO TOP OF THE PAGE ZOOM file:///D|/EDFU/crt_19_5/edoc/english/OSD_3/osd_cont.htm (3 of ...
Page 86 - ADJUST HORIZONTAL; button on the monitor. The MAIN CONTROLS window appears.
The OSD Controls RETURN TO TOP OF THE PAGE ADJUST HORIZONTAL ADJUST POSITION under ADJUST HORIZONTAL shifts the image on your screen either to the left or right. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST HORIZONTAL expands or controls the image on your screen,...
Page 88 - ADJUST VERTICAL
The OSD Controls ADJUST VERTICAL ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL expands or controls the image on your screen, pushing it out toward the top or bottom o...
Page 90 - ADJUST SHAPE; ADJUST SIDE CURVE
The OSD Controls RETURN TO TOP OF THE PAGE ADJUST SHAPE ADJUST SIDE CURVE ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use these features only when the picture is not square. 1) Press the but...
Page 91 - Press
The OSD Controls 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. Press to confirm. 5) To adjust the pincushion, press the or button,press the to confirm. 6) When the pincushion is adjusted, press the button to highlight BALANCED. Press to confirm. file:///D|/EDF...
Page 92 - ADJUST SIDE ANGLES
The OSD Controls 7) To adjust the balanced pincushion, press the or button.Press to confirm. 8) When the balanced pincushion is adjusted, press the button to return to the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or pre...
Page 93 - button to highlight ADJUST SIDE ANGLES.
The OSD Controls 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button to highlight ADJUST SIDE ANGLES. 5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted, press to confirm. file:///D|/EDFU/crt_19_5/edoc/e...
Page 95 - ROTATE IMAGE is highlighted.; ROTATE IMAGE
The OSD Controls ROTATE IMAGE is highlighted. ROTATE IMAGE (Not available in all models) ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use this feature only when the picture is not square. 1) Press...
Page 96 - ADJUST COLOR
The OSD Controls 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. 6) To adjust the rotation, press the or button. 7) When the rotation is adjusted, press the button to confirm. Press to return to the ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted....
Page 99 - RESET TO FACTORY SETTINGS
The OSD Controls 6a) If USER PRESET is highlighted, press the button to highlight RED. Next, press the to confirm. Press or button to adjust the color red. 6b) When finished with RED, press to confirm. Press the button to highlight GREEN. press to confirm.Next, press the or button to adjust the colo...
Page 101 - EXTRA CONTROLS; DEGAUSS
The OSD Controls EXTRA CONTROLS DEGAUSS EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS ...
Page 102 - button. Your screen will be degaussed, then the MAIN; ADJUST MOIRE
The OSD Controls 5) To degauss your screen, press the button. Your screen will be degaussed, then the MAIN CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted. ADJUST MOIRE (Not available in all models) EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a ...
Page 103 - button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be
The OSD Controls 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted, file:///D|/EDFU/crt_19_5/edoc/english/OSD_3/osd_cont.htm (22 of 26)2005-04-21 ¤W¤È 09:36:45
Page 105 - Turn on LightFrame
The OSD Controls Turn on LightFrame (Not available in all models) EXTRA CONTROLS is a set of three features, including LIGHTFRAME. This feature allows the user to turn on the LIGHTFRAME function to activate in full screen mode. 1) Press button on the monitor. The MAIN CONTROLS window appears. 2) Pre...
Page 106 - button to go back to MAIN CONTROLS. Press; CLOSE MAIN CONTROLS
The OSD Controls 5) Pess the button. LIGHTFRAME will be activated. 6) Press button to go back to MAIN CONTROLS. Press button again to exit the OSD. RETURN TO TOP OF THE PAGE CLOSE MAIN CONTROLS file:///D|/EDFU/crt_19_5/edoc/english/OSD_3/osd_cont.htm (25 of 26)2005-04-21 ¤W¤È 09:36:45
Page 108 - Your Philips F1rst Choice Warranty; Thank you for purchasing this Philips monitor.; Warranty coverage begins as from the day you buy your monitor.
F1rst Choice Warranty Your Philips F1rst Choice Warranty Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties while install...
Page 109 - Just a click away
F1rst Choice Warranty ● Repairs or product modifications and alterations have been executed by unauthorized service organizations or persons; ● Damage is caused by accidents including but not limited to lightning, water or fire, misuse or neglect; ● Reception problems caused by signal conditions or ...
Page 110 - F1rst Choice Contact
F1rst Choice Warranty Having the following information available will also help speed up the process: ● Your proof of purchase indicating: date of purchase, dealer name, model and product serial number. ● The full address to which the faulty monitor has to be collected and the swap model should be d...
Page 111 - Your Guarantee in Central and Eastern Europe
Your Guarantee in Central and Eastern Europe Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips gu...
Page 112 - website for additional support.; Just a phone call away; Philips Service and Consumer Information Centers
Your Guarantee in Central and Eastern Europe Please note that the product is not defective under this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not origin...
Page 113 - Your International Guarantee; The Philips guarantee may not apply if:
International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and repl...
Page 115 - Click here to access the; Warranty coverage begins the day you buy your product.
United States Guarantee Philips F1rst Choice Warranty (USA / Canada) Thank you for purchasing this Philips monitor. All Philips monitors are designed and manufactured to high standards and deliver high-quality performance, ease of use and ease of installation. Should you encounter any difficulties w...
Page 116 - Your warranty does not cover:; Where IS SERVICE AVAILABLE?
United States Guarantee When the warranty on the original product expires, the warranty on all replaced and repaired products and parts also expires. WHAT IS EXCLUDED? Your warranty does not cover: ● labor charges for installation or setup of the product, adjustment of customer controls on the produ...
Page 117 - discussed there may save you a service call.
United States Guarantee discussed there may save you a service call. TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS... Contact the Philips Customer Care Center phone number listed below for product assistance and procedures for servicing: Philips Customer Care Center (877) 835...
Page 118 - Philips type number
United States Guarantee This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Before contacting Philips, please prepare the following details so we can solve your problem quickly. ● Philips type number ● Philips serial number ● Pur...
Page 119 - F1rst Choice Contact Information
F1rst Choice Contact Information F1rst Choice Contact Information Country Telephone number Tariff Austria 0820 901115 0.20 Belgium 070 253 010 0.17 Cyprus 800 92256 Free of Charge Denmark 3525 8761 Local call tariff Finland 09 2290 1908 Local call tariff France 08 9165 0006 0.23 Germany 0180 5 007 5...
Page 120 - Consumer Information Centers; Eastern Europe; BELARUS
Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Belarus • Brasil • Bulgaria • Canada • Chile • China • Colombia • Croatia • Czech Republic • Dubai • Estonia • Hong Kong • Hungary • India • Indonesia • Korea • Latvia • Lithuania • Malaysia • M...
Page 121 - CROATIA
Consumer Information Centers CROATIA Renoprom d.o.o. Mlinska 5, Strmec HR - 41430 Samobor +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: i...
Page 122 - ROMANIA
Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel.:+40 21 2101969 SERBIA&MONTENEGRO Tehnicom Service d.o.o.Bulevar Vojvode Misica 37B YU – 11000 BelgradeTel: +381 11 3060 886 SLOVAKIA Datalan Servisne Stredisko Puchovs...
Page 123 - RUSSIA; Latin America; ANTILLES
Consumer Information Centers RUSSIA Tel: +7 095 961-1111 Tel: 8-800-200-0880 Web-site: www.philips.ru TURKEY Türk Philips Ticaret A.S. Yukari Dudullu Org.San.Bolgesi 2.Cadde No:22 34776-Umraniye/Istanbul Tel: (0800)-261 33 02 UKRAINE Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562...
Page 124 - BRASIL
Consumer Information Centers BRASIL Philips da Amazonia Ind. Elet.Ltda. Rua Verbo Divino, 1400 -Sao Paulo-SP CEP-04719-002Phone: 11 2121 0203 - São Paulo & 0800-701-0203 - Other Regions without São Paulo City. CHILE Philips Chilena S.A.Avenida Santa Maria 0760P.O. box 2687Santiago de ChilePhone:...
Page 125 - PERU; Canada; CANADA; Pacific
Consumer Information Centers PERU Philips Peruana S.A.Customer DeskComandante Espinar 719Casilla 1841Limab18Phone: (01)-2136200Fax : (01)-2136276 URUGUAY Rambla O'Higgins 5303 MontevideoUruguayPhone: (598)-619 66 66Fax : (598)-619 77 77Customer Desk:Phone: 0004054176 VENEZUELA Industrias Venezolanas...
Page 126 - AUSTRALIA; Asia; BANGLADESH
Consumer Information Centers AUSTRALIA Philips Consumer ElectronicsCustomer Care Centre.Level 1, 65 Epping RdNorth Ryde NSW 2113Phone: 1300 363 391Fax:+61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd.Consumer Help Desk2 Wagener Place, Mt.AlbertP.O. box 1041AucklandPhone: 0800 477 999 (Toll Free)F...
Page 127 - HONG KONG
Consumer Information Centers HONG KONG Philips Electronics Hong Kong LimitedConsumer ServiceUnit A, 10/F. Park Sun Building103-107 Wo Yi Hop RoadKwai Chung, N.T.Hong KongPhone: (852) 2619-9663Fax: (852) 2481 5847 INDIA Phone: (020)-712 2048 ext 2765 Fax: (020)-712 1558 BOMBAYPhilips IndiaCustomer Re...
Page 128 - INDONESIA
Consumer Information Centers INDONESIA Philips Group of Companies in IndonesiaConsumer Information CentreJl.Buncit Raya Kav. 99-10012510 JakartaPhone: (021)-7940040 Ext 2100Fax : (021)-7947511 / 7947539 KOREA Philips Korea Ltd.Philips HouseC.P.O. box 3680260-199, Itaewon-Dong.Yongsan-Ku, Seoul 140-2...
Page 129 - PAKISTAN
Consumer Information Centers PAKISTAN Philips Consumer Information CentreMbuarak manzil,39, Garden Road, Saddar,Karachi-74400Phone: (9221)-2737 411-16 Fax:(9221)-2721 167 E-Mail:[email protected]:www.philips.com.pk PHILIPPINES Philips Electronics&Lighting, Inc.Consumer Electronics48F PBCO...
Page 130 - THAILAND; Africa; MOROCCO; Middle East; DUBAI
Consumer Information Centers THAILAND Philips Electronics Thailand Ltd.26-28th floor, Thai Summit Tower1768 New Petchburi RoadKhwaeng Bangkapi, Khet HuaykhwangBangkok 10320 ThailandPhone : (66) 2-652 8652email:cic [email protected] Africa MOROCCO Philips Electronique Maroc304,BD Mohamed VCasablancaPh...
Page 132 - It Takes Only A Moment To; PROTECT YOUR INVESTMENT.; SIMPLY MAIL THE CARD BELOW TO RECEIVE ALL; WARRANTY VERIFICATION; OWNER CONFIRMATION; MODEL REGISTRATION; WARRANTY; IMPORTANT - RETURN WITHIN TEN DAYS
It Takes Only A Moment To PROTECT YOUR INVESTMENT. Congratulations on investing in a Philips product. It’s an important and intelligent decision that’s sure to reward youfor many years to come. To ensure you’ll get all of the privileges and protection that come with your purchase,please complete you...
Page 133 - Warranty Verification; See Inside For; Warranty; MATERIAL; IMPORTANT
RETURN THE ATTACHED CARD WITHIN TEN DAYS TO ENSURE YOUR: ✓ Warranty Verification ✓ Owner Confirmation ✓ Model Registration See Inside For ValuableBenefits! Warranty Registration Card PO BOX 1533 DEPOSIT NY 13754-1533 PLEASE APPLY FIRST CLASS STAMP TIME-DATED MATERIAL Please Open Promptly! a !1375415...