Philips 105S7 - Manual

Regulatory Information Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre...

Other Related Information Other Related Information Safety Precautions and Maintenance • Troubleshooting • Regulatory Information • Information for Users in the U. S . • Information for Users Outside the U.S Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consist...

About This Electronic User's Manual About This Electronic User's Manual About This Guide • Other Documents You May Need • Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, opera...

About This Electronic User's Manual RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in ital...

105S7 Product Information Product Information Product Features • Technical Specifications • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views Product Features Model Color 105S79 Gray 105S78 Black 105S7S Siver/black 105S7 ● 15-inch (13.8" VIS) color monitor with exc...

105S7 Product Information 640 x 480 @ 75 Hz 800 x 600 @ 75 Hz 800 x 600 @ 85 Hz 1024 x 768 @ 60 Hz * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor ...

105S7 Product Information • Dimensions 14.0" x 14.2" x 14.7" / 357 x 362 x 373 mm (including base) 14.0" x 11.8" x 14.7" / 357 x 300 x 373 mm (excluding base) • Weight 14.8kg • Power supply 100 - 240 VAC, 60-50Hz(Please refer to rating label) • Temperature (operating) 0° to 4...

107E Product Information 4 Ground 12 Serial data line(SDA) 5 Ground 13 H. Sync / H+V 6 Red video ground 14 V. Sync (VCLK for DDC) 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components....

Installing your Monitor Installing your Monitor Front View • Rear View • Base installation Front View To switch monitor's power power ON and OFF. file:///C|/Documents%20and%20Settings/lynn/My%20Doc...20manual/multi_manual/ENGLISH/install_5/INSTALL.HTM (1 / 4) [2004/9/24 ÿdUÿdÿˆ 11:42:28]

Installing your Monitor To adjust the OSD items. To select the OSD items. RETURN TO TOP OF THE PAGE Rear View file:///C|/Documents%20and%20Settings/lynn/My%20Doc...20manual/multi_manual/ENGLISH/install_5/INSTALL.HTM (2 / 4) [2004/9/24 ÿdUÿdÿˆ 11:42:28]

Installing your Monitor 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. RETURN TO TOP OF THE PAGE Base installation file:///C|/Documents%20and%20Settings/lynn/My%20Doc...20manual/multi_manu...

Installing your Monitor 1. To INSTALL ● Slide in and click into place. 2. To UN-INSTALL ● Presses down tab and slide out. RETURN TO TOP OF THE PAGE file:///C|/Documents%20and%20Settings/lynn/My%20Doc...20manual/multi_manual/ENGLISH/install_5/INSTALL.HTM (4 / 4) [2004/9/24 ÿdUÿdÿˆ 11:42:28]

The OSD Controls The OSD Controls The OSD Controls : Picture • Geometry • Degaussing • Color Management • Language • Other • Exit Picture If necessary, please follow such steps to take • Picture • . 1 • Press any one of • • • buttons. The • Picture • screen is displayed and highlighted. 2 • Press th...

The OSD Controls Contrast Brightness H- Position H-Size V-Position V-Size Pincushion Trapezoid Parallel Bow Top Corner Bottom Corner Recall Exit 4 • If desired values are reached, stop pressing the button or the button. Press the button or the button to select and press the button or the button to r...

The OSD Controls 4. If desired values are reached, stop Pressing the button or the button. Press the button or the button to select and press the button or the button to return to • Geometry • screen that will be highlighted. Or, stop pressing any button, and the OSD window will disappear 12 seconds...

The OSD Controls 3.When the image does not jiggle, the degaussing is finished and the Degaussing item is highlighted. Press the button or the button to select other desired items. Or, select and presss the button or the button, and the OSD window will disappear. RETURN TO TOP OF THE PAGE Color Manag...

The OSD Controls 5.2 After the • Red • adjustment is finished, press the button or the button to highlight the • Green •. Then, Press the button or the button to adjust the Green. 5.3 After the • Green • adjustment is finished, press the button or the button to highlight the • Blue • . Then, press t...

The OSD Controls RETURN TO TOP OF THE PAGE Other Others can help you to select • OSD H-Location • , • OSD V-Location • , • Message • or • Smart Settings • . 1.Press any one of • • • buttons and the OSD main image is displayed. Press the button or the button to select • Other • that will be highlight...

The OSD Controls 5. After all adjustments are finished, Press the button or the button to select and press the button or the button to return to • Other • that will be highlighted. Or, stop pressing any button, and the OSD window will disappear 12 seconds later. New settings are stored. RETURN TO TO...

Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: PACIFIC: Australia • New Zealand ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia • Pakistan • Philippines • Singapore • Taiwan • Thailand AFRICA: ...

International Guarantee Your International Guarantee Dear Customer, Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and repl...

Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia • Bangladesh • Brasil • Canada • Chile • China • Colombia • Czech Republic • Dubai • Egypt • Hong Kong • Hungary • Slovakia • Slovenia • India • Indonesia • Japan • Korea • Malaysia • Mexico • Morocco • New Ze...

Consumer Information Centers SLOVENIA PC HAND Brezovce 10 SI - 1236 Trzin Tel: +386 1 530 08 24Email: [email protected] POLAND Zolterul.Zytnia 1 PL - 05-500 Piaseczno Tel:+48 22 7501766Email: [email protected] RUSSIA Tel: +7 095 961-1111Tel: 8-800-200-0880 Web-site: www.phili...

Consumer Information Centers PARAGUAY Philips del Paraguay S.A.Avenida Artigas 1513Casilla de Correos 605AsuncionPhone: (021)-211666Fax : (021)-213007 PERU Philips Peruana S.A.Customer DeskComandante Espinar 719Casilla 1841Limab18Phone: (01)-2136200Fax : (01)-2136276 URUGUAY Ind.Philips del Uruguay ...

Consumer Information Centers Pacific AUSTRALIA Philips Consumer Service.Customer Information Centre.3 Figtree DriveHomebush Bay NSW 2140Phone: CIC:1300 363 391, PCE Service:1 300-361 392Fax:+61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd.Consumer Help Desk2 Wagener Place, Mt.AlbertP.O. box 1041A...

Consumer Information Centers TAIWAN Philips Taiwan Ltd.Consumer Information Centre13F, No. 3-1 Yuan Qu St., Nan Gang Dist.,Taipei, 115, TaiwanPhone: 0800-231-099 Fax:(02)-3789 2641 THAILAND Philips Electronics (Thailand) Ltd.Philips Service Centre209/2 Sanpavut Road,Bangna, Bangkok 10260Phone : (02)...

Frequently Asked Questions Frequently Asked Questions 1. What does the "Designed for Windows" logo signify? The "Designed for Windows" logo means your Philips monitor fulfills the requirements and recommendations of the PC9x (97, 98, or 99) System Design Guide and passes stringent WH...

Frequently Asked Questions Ecology: MPRII: No requirement.TCO92: No requirement.TCO95: Set general ecological standards including recycling preparation, environmental policy and environmental certification.TCO99: Further tightened TCO95 norms.TCO'03:Require the recycling information to users. 6. How...

Frequently Asked Questions 8. Why does the picture on the screen appear to flicker? A low refresh rate or electrical interference typically causes flickering in the picture. Possible solutions include the following: ● Verify that the proper drivers are installed for your video card ● Make sure that ...

Frequently Asked Questions Press and hold the OSD menu key for about 15 seconds until picture displays "OSD MAIN MENU UNLOCKED" 12. My screen shows NO SYNC INPUT , how can I get rid of this? Check the following for possible solutions: ● Bent pins on the video cable ● Make sure the computer i...

Frequently Asked Questions ● Change resolution to the recommended standard for the specific monitor size. ● Change Window viewing pattern/scheme to a pattern where the Moire is less visible. ● Change horizontal and vertical size to optimize the reduction of the Moire effect. 15. My monitor appears t...

Frequently Asked Questions ● If the OSD menu is also dim, please contact service for repair ● Reset the monitor via the OSD menu ● Change the color temperature settings to 9300 color coordination via the OSD menu ● Set the Contrast to maximum level (100) and Brightness to middle level (50) 20. How c...

Frequently Asked Questions 23. Why is there no picture on my monitor even though the power LED is green? ● Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 (-) button to increase Contrast and then press and hold the 4 (+) button to increase Brightness. These butt...

Glossary Glossary A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus ope...

Glossary RETURN TO TOP OF THE PAGE C CE Mark CE mark is displayed on products per EMC and LV ( low Voltage Device ) directives in compliance with European Community safety, EMI and EMS requirements and is compulsory on products for sale in the European Community. Color temperature A way of describin...

Glossary is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other tubes. Convergence error Bean misalignment causing one or more of the three beams passing through the wrong aperture in...

Glossary See DDC. DDC 2Bi See DDC. Degaussing The procedure of demagnetizing the shadow mask and associated metal parts of a picture tube at switch-on to minimize picture distortion. This is usually accomplished by means of a special degaussing coil through which a decaying alternating current is pa...

Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. RETURN TO TOP OF THE PAGE E Electromagnetic radiation standards International standards set to li...

Glossary MPR-II The standard originally proposed by the Swedish National Board of Measurement and Testing. It set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopted as a world standard. MPR-II defines maximum permitted electrostatic, magnetic and electric field...

Glossary RETURN TO TOP OF THE PAGE H Hertz The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to 1 cycle/second. Horizontal dot pitch See Dot pitch. Horizontal scanning frequency Also called line frequency and expressed in kHz, it is the number of video...

Glossary Interlaced/non-interlaced Interlaced. The method of writing a picture on the screen by initially writing all even lines and subsequently writing all odd lines of the picture. Result: The complete picture is composed of two interlaced half pictures (or fields). With interlacing, a vertical (...

Glossary The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic radiation s...

Glossary M Moiré effect A fringe pattern arising from the interference between two superimposed line patterns. In a monitor it comes from the interference between the shadow mask pattern and the video information (video moiré), and between the shadow mask pattern and the horizontal line pattern (sca...

Glossary RETURN TO TOP OF THE PAGE O OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan The practice in which areas without useful video i...

Glossary Pin-cushion Distortion See Geometric distortion. Pixel Abbreviation for picture element, the smallest element of the picture that can be displayed on the screen. The smaller the pixel size, the better the resolution of the monitor. Pixel size is determined by the size of the electron spot o...

Glossary The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number of pixels in a line multiplied by the number of horizontal lines. See also video grap...

Glossary The ARAS coating reflects only about 0.5% of the incident light. AGARAS (Anti-Glare Anti-Reflection Anti-Static) coating . A combined anti-reflection, anti-glare, anti-static coating. Self-test function A monitor equipped with hardware or software to automatically detect cable connection st...

Glossary TCO See Electromagnetic radiation standards. Tilt function See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue sig...

Glossary Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic. Upstream The direction of data flow towa...

Glossary See Dot pitch. Vertical scanning frequency Expressed in Hz, this is the number of fields written to the screen every second in interlaced mode. In non-interlaced mode vertical scanning frequency is the number of frames (complete pictures) written to the screen every second (also known as re...

Download and Print Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe® Acrobat Reader installed, click on the link to install...