Page 2 - is a registered trademark of Perreaux Industries Ltd.
Perreaux Industries Limited makes no warranty for the use of its products, other than those expressly contained in the warranty detailed herein. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change products or specifications detailed he...
Page 3 - This page has intentionally been left blank.
Page 4 - Key Features; The Perreaux “Silhouette” series takes you even closer to the
i Introducing the Perreaux Silhouette Series Designed as a range of high quality, yet affordable modules; the ‘Silhouette’ series will compliment and enhance your existing system. Drawing on our extensive knowledge gained from more than a quarter of a century of developing highest quality audio prod...
Page 6 - ii
iii Table of Contents i Introducing the Perreaux Silhouette Series.................................... 3 ii Important Safety Instructions............................................................ 4 iii Table of Contents..................................................................................
Page 7 - Unpacking and Placement; Note: Please retain all packaging material for future transport.
1 Unpacking and Placement Unpacking Procedure The SX60m is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed. Pull the foam protecting end-caps off either side of the unit and remove the black material cove...
Page 8 - Note: Please take the time to read the SX60m manual thoroughly
2 Instant Install If you are like us, the first thing you will want to do is to play your favourite piece of music through your new SX60m. The following instructions are written to enable you to achieve this as quickly as possible. These are not comprehensive instructions, but are designed to enable...
Page 10 - Front Panel Functions; Power LED
3 Front Panel Functions Power LED This blue LED indicates the power status of your SX60m Mono-Aural Power Amplifier. 9
Page 11 - Rear Panel Functions; Unbalanced Input and Output
4 Rear Panel Functions Unbalanced Input and Output Unbalanced Input from preamplifier, accepts a standard ection is the uppermost unbalanced input ( RCA ). The input conn connector, indicated by red inner ring. Line Output to other amplifiers (e.g. bi-amping), accepts a standard unbalanced input ( R...
Page 12 - Balanced Output; Speaker Binding Posts
ne input specifications, please refer to hapter 11. For more information on liC Please refer to the operating manual of your preamplifier to verify that the pin assignments of the balanced output connectors Note: correspond to the SX60m balanced inputs. In the event that they are not compatible, the...
Page 13 - Serial Number/Voltage Label; ONLY; AC Mains Input
X60m. Please record this ed product serial number to Serial Number/Voltage Label The serial number is unique to your Snumber and store it in a safe place. For any service relatenquiry, please be prepared to quote thePerreaux personnel or their service representative. The voltage displayed in this ar...
Page 14 - Special Design Philosophies; Minimalist
5 Special Design Philosophies Perreaux has been designing and manufacturing only the highest quality audio componentry for more than a quarter of a century. Technology has continued to evolve rapidly over that time and our knowledge and application of design, materials and manufacturing techniques h...
Page 16 - Special Design Features; Capable of continuously delivering 60W into an 8
6 Special Design Features Construction The SX60m is stylish and unobtrusive. The front panel is made from high quality solid 6.0mm (0.2”) thick aluminium extrusion featuring our trademark machined Perreaux logo and large volume control knob. These are finished in durable and stylish satin chrome fin...
Page 18 - Care and Maintenance; Note: Please switch the unit off and remove the cord set from the
7 Care and Maintenance Note: Please switch the unit off and remove the cord set from the rear of the Amplifier before attempting to clean your SX60m in the manner described below. Never apply liquid directly to the SX60m. Never use abrasives. Never rub in a circular motion. Cover The cover features ...
Page 19 - Perreaux
8 Warranty Information 1 Year Limited Warranty The Perreaux SX60m is warranted free from defects in material and workmanship under normal use for a period of 1-year (365 days) from the date of purchase. To extend the warranty of the Perreaux SX60m to three (3) years from date of purchase, please ret...
Page 20 - Industries; S I L H O U E T T E S
9 Extended Warranty Registration Form Please complete this form and either fax, mail or e-mail it, along with a copy of the original receipt, to Perreaux Industries Ltd. Fax: +64 3 489 2976 Mail: Perreaux Industries Ltd PO Box 305 Mosgiel Dunedin 9032 New Zealand E-mail: [email protected] Alternativ...
Page 21 - Troubleshooting Guide; There is no
10 Troubleshooting Guide Please use this guide if you are experiencing any problems with the SX60m in your system. It will provide possible solutions for some given symptoms. There is no output from my system SX60m not turned on Make sure the SX60m power switch is in the DOWN position. AC cord not p...
Page 23 - 1 Specifications; Specifications; Audio Connections
11 Specifications The correlation between published specifications and sonic quality can be unreliable. A list of numbers reveals virtually nothing. All technical measurements must be subject to qualitative as well as quantitative interpretation. Measurements of the SX60m reveal excellent results by...
Page 24 - IEC AC mains input receptacle; x 2SB 4A normal blow
Other Connections IEC AC mains input receptacle Mains Input Voltage 115V or 230V AC at 50Hz/60Hz (Set within the SX60m at time of manufacture) Internal Mains Fuse Rating 1 x 2SB 500mA slow blow (NOT user serviceable) Internal Output Fuse Rating 2 x 2SB 4A normal blow (NOT user serviceable) Overall D...
Page 25 - into 8
Input Sensitivity ................................................................... 0.37V RMS The Input Sensitivity figure indicates the input voltage required to achieve “rated” output (60W RMS into 8 Ω ). Gain .........................................................................................
Page 26 - Dimensions
Page 27 - Details
13 Contact Details For more information please contact your Perreaux dealer, or contact: Perreaux Industries Ltd PO Box 305 Mosgiel Dunedin 9032 New Zealand Ph: +64 3 489 2975 Fax: +64 3 489 2976 E-mail: [email protected] Internet: www.perreaux.com 26
