Perlick 95010REVC - Manual
Perlick 95010REVC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – STACKING KIT INSTALLATION; Step 2: Lay upper cabinet on its back and remove leg levelers and
- Page 3 – sheet metal screws (where the rivets were drilled out in step 1).; pointing away from the bottom of the unit.
- Page 4 – Move stacked assembly into final position by pushing lower unit.; Orient tabs vertically. Attach grille assemby to upper unit.
48" & 72" Mounting Plate
15" & 24" Mounting Plate
Phillips
Screwdriver
Grille
BUMPER, ADHESIVE POLY
LATCH STRIKE
Drill
5/32" Drill Bit
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com
Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning
95010 REV C
Never install if used with caster kits or
Tools Required
1/4-20 X 1/2" MACHINE SCREW
STACKING KIT INSTALLATION
#10 X 1/2" SHEET METAL SCREW
manual that came with the cabinet.
per the installation and operating
Ensure the anti-tip brackets are installed
For built-in applications only!
IMPORTANT
extended leg kits.
-1-
Parts Required
MODEL
Part Number
Description
HP15
HP24 &
HC24
HH24 &
HA24-18
HP48
HP72
63965
LATCH STRIKE
2
2
2
4
6
65700-2
15" Grille
1
65733-4
24" Grille
1
1
2
3
68094-15
15" Mounting Plate
1
68094-24
24" Mounting Plate
1
68094-24x18 24"x18" Mounting Plate
1
68094-48
48" Mounting Plate
1
68094-72
72" Mounting Plate
1
C31323
Bumper, Adhesive Poly
4
4
4
8
12
M00885-189
1/4-20 X 1/2" MACHINE
SCREW
4
4
4
6
6
M50050-466
#10 X 1/2" SHEET METAL
SCREW
2
2
2
5
5
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning so that it can be done safely and without damage. 95010 REV C Step 1: Drill out top r...
NOTE: EXTENSION OF LEG LEVELERS WILL INCREASE ASSEMBLY HEIGHT 68 78 " 95010 REV C sheet metal screws (where the rivets were drilled out in step 1). in step 2) by using 1/4-20 machine screws . Flange should be STACKING KIT INSTALLATION pointing away from the bottom of the unit. Step 3: Attach mou...
8300 W. Good Hope Rd. Milwaukee, WI 53223 Phone: (414)353-7060 Fax: (414)-353-7069 perlick.com Perlick is comitted to continuous improvement. Therefore, we reserve the right to change specifications without warning Move stacked assembly into final position by pushing lower unit. 95010 REV C STACKING...
