Peavey PCX-U302 - Manual
Peavey PCX-U302 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – INTRODUCTION; Thank you for selecting a Peavey Pro Comm PCX-; True Diversity Receiver; The Peavey Pro Comm PCX-U302 quartz controlled; UNIT FEATURES AND FUNCTIONS
- Page 4 – Selects a group of frequencies.; RF Signal Level Indicator:; Adjusts the AF output level of the receiver.
- Page 7 – GND PIN 1
- Page 10 – INSTRUCTIONS; Figure 9
- Page 11 – RECEIVER AND AMPLIFIER VOLUME ADJUSTMENT:; The level switch does
- Page 13 – SELECTING A FREQUENCY CHANNEL ON THE RECEIVER; Your local dealer/distributor should be able to advise
- Page 14 – HANDHELD WIRELESS MICROPHONE TRANSMITTER; Like the receiver, the hand held microphone features; Unit Features and Functions
- Page 17 – BELT PACK TRANSMITTER; Like the receiver, the belt pack transmitter features
- Page 19 – OPERATION OF THE BELT PACK TRANSMITTER
- Page 21 – AF 4-PIN INPUT CONNECTION METHODS; -Wire Electret condenser microphone Capsule
- Page 22 – SPECIFICATIONS
- Page 23 – TROUBLESHOOTING GUIDE; MULITPLE SYSTEM
- Page 26 – PEAVEY ELECTRONICS CORPORATION LIMITED WARRANTY
- Page 28 – Features and specifications subject to change without notice.
P
C
X
-
U
3
0
2
P
C
X
-
U
3
0
2
PLL True
diversity
UHF
wireless
receiver
PLL True
diversity
UHF
wireless
receiver
O P E R A T I N G G U I D E
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INTRODUCTION Thank you for selecting a Peavey Pro Comm PCX- U302 quartz controlled single channel true diversity wirelessmicrophone system. Before operating and installing thissystem please read this instruction manual carefully andthoroughly in order to attain the correct operatingprocedures and to...
1. Antenna Input Connector A 2. Power Switch and Indicator: When the switch is turned on the red indicator illuminates to denote normal power status. 3. Group Selector: Selects a group of frequencies. 4. Channel Selector: Selects a channel within a group. There are six group numbers available. Group...
desired device. Make sure the unbalanced level switch is in the proper position before applying power. c. Balanced Output: Connect the male XLR connector into the balanced output connector on the back of the receiver. Connect the other end of the cable into the “Mic/Balanced” input of the desired de...
