Parrot Uncle F6253110V - User Manual

F6253

Installation & Operating Instructions for the

Parrotuncle Owner’s Installation ,Manual

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

1.

To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or before servicing
the fan or installing accessories.

2.

Read all instructions and safety information carefully before installing your fan and save these instructions.

3.

Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are unfamiliar with electric
wiring, please use a qualified and licensed electrician.

4.

Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven

(7) feet

of clearance

between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls or other upright structures.

5.

WARNING:

The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least

100 pounds

. To reduce

the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting screws provided
with the outlet box. The box must be supported directly by the building structure.

6.

WARNING:

To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use mounting

screws provided with the outlet box most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may
need to be replaced. Consult a qualified electrician if in doubt.

7.

Electrical diagrams are for reference only. Light kits that are not packed with the fan must

UL

listed and marked suitable for use with the model

fan you are installing. Switches must be

UL

. general use switches. Refer to the instructions packaged with the light kits and switches for proper

assembly.

8.

After installation is complete, check that all connections are absolutely secure.

9.

After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be
spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

10.

WARNING:

To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.

11.

Do not separate the reverse switch until the fan has come to a complete stop.

12.

Do not insert anything into the fan blades while they are rotating.

13.

WARNING:

To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after installation. Do

not insert objects in the path of the blades.

14.

To avoid personal injury or damage to the fan and other items, be cautious when

working around or cleaning the fan.

15.

Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most

cleaning.

NOTE:

The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations that

may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of this fan.

NOTE:

This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities are different or are

impaired, or lack of experience or knowledge, unless such persons are supervised or trained to operate the appliance by a person responsible for their
safety.

NOTE:

Children should be supervised to ensure that they do not use appliances as a toy.

THANK YOU FOR YOUR PURCHASE

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the
product

SAFETY TIP

TECHNICAL INFORMATION

SKU

Rated Voltage

Rated power(motor)

Light

F6253

110-120 VAC

55W

4

XE

12

MAX.25W

（

EXCLUDE

）