Page 2 - Important; NGLISH; Dear Panasonic Customer:; Important Safety Notice
Important Safety Notice Important Information 2 - E NGLISH Dear Panasonic Customer: The following information should be read and understood as it provides details, which will enable you to operate the projector in a manner which is both safe to you and your environment, and conforms to legal require...
Page 3 - Important Information
Important Safety Notice Important Information E NGLISH - 3 WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi...
Page 4 - Contents; User logo display function; FUNCTION; Standby power reduction; Quick steps; Important Information; Read this first; Getting Started
4 - E NGLISH Contents User logo display function You can project your unique image such as your company’s logo when projection starts. ( Æ page 37) FUNCTION button You can assign almost all the items on the on-screen menu to the FUNCTION button of the remote control and control panel. You can displa...
Page 5 - Settings; NETWORK menu; Maintenance; Specifications; Informations importantes
Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix E NGLISH - 5 Settings Menu Navigation ...................................... 27 Navigating through the MENU .............................27ON-SCREEN MENU ............................................28Main...
Page 6 - WARNING; POWER; qualified technician.; Precautions with regard to safety
Precautions with regard to safety Important Information 6 - E NGLISH WARNING POWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems oc- cur. If the followings problems occur, cut off the power supply immediately. Continued us...
Page 7 - ACCESSORIES; If the battery fluid leaks, do not touch it; CAUTION
Precautions with regard to safety Important Information E NGLISH - 7 Do not look into or touch the lights emit- ted from the lens while the projector is being used. Doing so can cause burns or loss of sight. Strong light is emitted from the projector’s lens. Do z not look or place your hands directl...
Page 8 - Cautions when transporting; Do not use under the following
Precautions with regard to safety Important Information 8 - E NGLISH ON USE/INSTALLATION Do not put your weight on this projector. You could fall or the projector could break, and injury will result. Be especially careful not to let young children stand z or sit on the projector. Do not place the ...
Page 9 - Cautions on use
Precautions with regard to safety Important Information E NGLISH - 9 Cautions on use In order to get the picture quality Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Depending on where...
Page 10 - Accessories
Precautions with regard to safety Important Information 10 - E NGLISH Accessories Make sure the following accessories are provided with your projector. Remote control for PT-LB90NTU (×1) (N2QAYB000436) Remote control for PT-LB90U/LB78VU/ LB75VU (×1) (N2QAYB000262) Power cord (×1) (K2CG3DR00008) RGB ...
Page 11 - Preparation; LANGUAGE; Press ▲▼◄►buttons of the remote; Press the ENTER button to proceed to; Press ▲▼buttons to select the required; Press the ENTER button to finish.
Read this first Preparation E NGLISH - 11 Read this first When you start the projection for the first time or after the projector is initialised ( Æ page 42), the LANGUAGE menu and the INITIAL SETTING menu will be displayed. Set those menus according to the usage conditions and environment.The setti...
Page 12 - About Your Projector; Projector body; Top and front view; Control panel
About Your Projector Preparation 12 - E NGLISH About Your Projector Projector body Top and front view J Zoom ring Adjust the projection size. ( Æ page 23) Adjuster button ( Æ page 16) Remote control signal receptor Ambient Luminance Sensor (ALS) TEMP indicator Indicates the temperature status. ( Æ p...
Page 13 - Back and bottom view; Terminals
About Your Projector Preparation E NGLISH - 13 Back and bottom view J Lamp unit compartment ( Æ page 49) Terminals AC IN Connect the power cord to supply electronic power to the projector. ( Æ page 19) Security lock Attach the commercial shackle lock, manufactured by Kensington, to protect your proj...
Page 14 - Remote control; Top view
About Your Projector Preparation 14 - E NGLISH Remote control J Top view Remote control signal emitters Front view J POWER button Switch between stand-by mode and projection mode. ( Æ page 21, 22) Switch the required input signal button to select. (The NETWORK button is only for PT-LB90NTU) (See CD-...
Page 15 - Setting up; Screen size and throw distance
Setting up Getting Started E NGLISH - 15 Setting up Screen size and throw distance You can adjust the projection size with 1.2× zoom lens. Calculate and define the throw distance as follows. SD SW S H L (LW/LT) S H 88,6 m m L (LW/LT) S W Projected image Screen Screen (All measurements below are appr...
Page 16 - Projection method; Front leg adjusters and throwing angle
Setting up Getting Started 16 - E NGLISH Projection method You can use the projector with any of the following 4 projection methods. To set the desired method in the projector, see “INSTALLATION” on page 39. Setting on a desk/floor and J projecting from front Mounting in the ceiling and J projecting...
Page 17 - Connections; Before connecting to the projector; Connecting example: AV equipment
Connections Getting Started E NGLISH - 17 Connections Before connecting to the projector Read and follow the operating instructions of each peripheral device. z The peripheral devices must be turned off. z One RGB cable is provided with the projector. If necessary, prepare commercial connecting cabl...
Page 18 - Connecting example: Computers
Connections Getting Started 18 - E NGLISH Connecting example: Computers Computer Audio system Computer Computer Computer (Controlling a projector) Note When connecting the RGB signal cable, be sure to securely tighten the fixing screws on the D-Sub (15-pin) z wall outlet. Remarks For the network con...
Page 19 - Basic Operation; Switching the projector on/off; Power cord; Connecting; Disconnecting; Direct power off function; Direct power on function
Switching the projector on/off Basic Operation E NGLISH - 19 Switching the projector on/off Power cord Be sure to fix the power cord to the projector with the provided “Power cord secure lock” to prevent the power cord from coming off. Connect the provided power cord securely. For details, see “Prec...
Page 20 - POWER and POWER LOCK indicators; POWER LOCK indicator status; POWER indicator status
Switching the projector on/off Basic Operation 20 - E NGLISH POWER and POWER LOCK indicators The POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the status of the RELEASE button. When the TEMP indicators are flashing, the POWER and POWER LOCK indicators will...
Page 21 - Switching on the projector; Connect the power cord.
Switching the projector on/off Basic Operation E NGLISH - 21 Switching on the projector Before switching on the projector, make sure the power cord and all the other devices are connected correctly. ( Æ page 17) INPUT SELECT RELEASE POWER indicator POWER LOCK indicator (2) (3) Connect the power cord...
Page 22 - Switching off the projector; Press the POWER button.; Press the POWER button again.
Switching the projector on/off Basic Operation 22 - E NGLISH Switching off the projector When operating the projector, check the status of the POWER indicator. ( Æ page 20) INPUT SELECT RELEASE POWER indicator POWER LOCK indicator (1), (2) Press the POWER button. 1 ) The confirmation screen will be ...
Page 23 - Projecting an image; Selecting the input signal; Positioning the image; ) Adjust the vertical angle of the projector.
Projecting an image Basic Operation E NGLISH - 23 Projecting an image Confirm the connections of the peripheral devices ( Æ page 17, 18) and power cord ( Æ page 19). Switch on the power ( Æ page 21) and the projector starts projecting. Select the input signal and adjust the image. Selecting the inpu...
Page 24 - Remote control operation; Capturing an image
Remote control operation Basic Operation 24 - E NGLISH Remote control operation Capturing an image You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the connected device. Press button. Press the FREEZE button again to escape. Stopping the proje...
Page 25 - Press
Remote control operation Basic Operation E NGLISH - 25 Setting up the image position automatically When a RGB signal is input, the projector adjusts the SHIFT , DOT CLOCK and CLOCK PHASE automatically. Press button. Screen Projected image Remarks The z SIGNAL SEARCH operation is also performed. (Whe...
Page 26 - Enlarging the image; Using an assigned function
Remote control operation Basic Operation 26 - E NGLISH Enlarging the image You can enlarge the projected image down to a cen- tered area for emphasizing within the range of 1× to 2×. Press button. Press the RETURN button to escape. J Button functions in digital zoom mode + button: zooms in - button:...
Page 27 - Menu Navigation; Navigating through the MENU; Operating procedure; Press the MENU button.; Press ▲▼ to scroll to the required; Press ▲▼ buttons to scroll to the; Resetting to the factory default
Menu Navigation Settings E NGLISH - 27 Menu Navigation Navigating through the MENU Operating procedure J Press the MENU button. 1 ) The main menu is displayed. PICTURE POSITIONLANGUAGEDISPLAY OPTION PROJECTOR SETUP SECURITYNETWORK PICTURE MODECONTRASTBRIGHTNESSCOLORTINTSHARPNESSCOLOR TEMPERATUREDAYL...
Page 28 - Main menu
Menu Navigation Settings 28 - E NGLISH The menu system allows you to access functions which do not have their own dedicated buttons on the remote control. The menu options are structured and categorized. For the menu operation, see “Navigating through the MENU”. ( Æ page 27) ON-SCREEN MENU Press but...
Page 30 - PICTURE menu
PICTURE menu Settings 30 - E NGLISH PICTURE menu Navigating through the MENU ( Æ page 27), select PICTURE from the main menu and then select the required item from the sub-menu. Set the selected item with ◄►buttons. z Remote control Control panel PICTURE MODE Depending on the projection environment,...
Page 31 - DAYLIGHT VIEW; STILL MODE; NOISE REDUCTION
PICTURE menu Settings E NGLISH - 31 DAYLIGHT VIEW You can keep the projected image bright and vivid even in well-lit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight. Change setting Change setting AUTO ON OFF AU...
Page 32 - POSITION menu
POSITION menu Settings 32 - E NGLISH POSITION menu Navigating through the MENU ( Æ page 27), select POSITION from the main menu and then select the required item from the sub-menu. Set the selected item with ▲▼◄► buttons. z Remote control Control panel REALTIME KEYSTONE If the projector is aligned n...
Page 33 - OVER SCAN; ASPECT; AUTO; H FIT
POSITION menu Settings E NGLISH - 33 OVER SCAN Use this function when characters or pictures are cropped near the periphery of the projected image. (Available with signals of S-VIDEO/VIDEO/RGB (Moving image)/ YP B P R only) Zoom out Zoom in Setting range: 0 to +3 z Remarks OVER SCAN z is not availab...
Page 34 - THROUGH; FRAME LOCK
POSITION menu Settings 34 - E NGLISH S4:3 J When a standard signal * 1 is input, the input signal will be sized down 75% and projected. S4:3 mode is effective when projecting 4:3 image onto a 16:9 screen. Input signal: XGA z Image: Panel: Screen: THROUGH J The image will be projected without any siz...
Page 35 - LANGUAGE menu
LANGUAGE menu Settings E NGLISH - 35 LANGUAGE menu Navigating through the MENU ( Æ page 27), select LANGUAGE from the main menu and then display the sub-menu. Select the required language with▲▼buttons z and press the ENTER button to set. Remote control Control panel PICTUREPOSITION DISPLAY OPTIONPR...
Page 36 - DISPLAY OPTION menu; INPUT GUIDE; Computer connection guidance; OSD DESIGN; CLOSED CAPTION SETTING; CLOSED CAPTION
DISPLAY OPTION menu Settings 36 - E NGLISH DISPLAY OPTION menu Navigating through the MENU ( Æ page 27), select DISPLAY OPTION from the main menu and then select the required item from the sub-menu. Set the selected item with◄►buttons. z Remote control Control panel ON-SCREEN DISPLAY You can set the...
Page 37 - Editing the original text; Press◄►buttons to select TEXT and; Press▲▼◄►buttons to select the; Select OK and press the ENTER button; AUTO SETUP; BACK COLOR
DISPLAY OPTION menu Settings E NGLISH - 37 STARTUP LOGO You can set to display the Panasonic logo, your own image or Pre-set letters, when starting up the projector. Change setting Change setting ON Display “ Panasonic ” logo TEXT Display the original text USER Display the image registered by user O...
Page 38 - WIDE MODE
DISPLAY OPTION menu Settings 38 - E NGLISH WIDE MODE When projecting WIDE signals, switch to ON to display the image in well adjusted size (16:9, 16:10, 15:9). Change setting Change setting AUTO Automatic setting OFF For 4:3 signals ON For WIDE signals SXGA MODE Switch to the SXGA setting when input...
Page 39 - PROJECTOR SETUP menu; STATUS; SIGNAL; INITIAL START UP
PROJECTOR SETUP menu Settings E NGLISH - 39 PROJECTOR SETUP menu Navigating through the MENU ( Æ page 27), select PROJECTOR SETUP from the main menu and then select the required item from the sub-menu. Set the selected item with◄►buttons. z Remote control Control panel STATUS You can check the using...
Page 40 - STANDBY MODE; LAMP RUNTIME; EMULATE
PROJECTOR SETUP menu Settings 40 - E NGLISH STANDBY MODE You can change the standby mode setting. Change setting Change setting ECO The standby power is reduced to 0.9 W to save power. NORMAL The power of the projector can be turned ON and the audio output can be set active from controlling the comp...
Page 41 - FUNCTION BUTTON; AUDIO SETTING; VOLUME; POWER BUTTON BEEP
PROJECTOR SETUP menu Settings E NGLISH - 41 FUNCTION BUTTON You can select a useful function from the list and assign it to the FUNCTION button as a short-cut. Press the MENU button of the control 1 ) panel or remote control to display the on screen menu (main menu, sub- menu or detailed menu). For ...
Page 42 - TEST PATTERN; INITIALIZE ALL
PROJECTOR SETUP menu Settings 42 - E NGLISH TEST PATTERN You can use the 7 different test patterns to adjust the focus of the image. Press the ENTER button to display the test pattern. Change pattern Change pattern Press the MENU or RETURN button to return to the PROJECTOR SETUP menu, or press repea...
Page 43 - SECURITY menu; PASSWORD; PASSWORD CHANGE; Press▲▼◄►buttons to change the; TEXT DISPLAY; Press▲▼◄►buttons to select the required; Press▲▼◄►buttons to select OK and
SECURITY menu Settings E NGLISH - 43 SECURITY menu Navigating through the MENU ( Æ page 27), select SECURITY from the main menu and then select the required item from the sub-menu. When you apply to the z SECURITY menu for the first time, you will be asked to perform the password operation. Input th...
Page 44 - MENU LOCK; MENU LOCK PASSWORD; CONTROL DEVICE SETUP; CONTROL PANEL
SECURITY menu Settings 44 - E NGLISH MENU LOCK Press the MENU button to display the menu. You can lock or unlock the menu operation. Change setting Change setting OFF Unlock the menu operation ON Lock the menu operation Remarks Once z MENU LOCK is set to ON , you cannot use the MENU button unless yo...
Page 46 - LAMP and TEMP Indicators; Managing the indicated problems; LAMP indicator; TEMP indicator
LAMP and TEMP Indicators Maintenance 46 - E NGLISH LAMP and TEMP Indicators Managing the indicated problems If a problem should occur with the projector, the LAMP and/or TEMP indicators will inform you. Manage the indicated problems as follows. Note When managing a problem, be sure to turn off the p...
Page 47 - Care and Replacement; Before Care and Replacement; Cabinet; Air filter; ) Turn the projector upside down and place
Care and Replacement Maintenance E NGLISH - 47 Care and Replacement Before Care and Replacement Before cleaning, be sure to turn off the power and disconnect the power plug from the wall outlet. z ( Æ page 19) Be sure to turn off the power as described in “Switching off the projector”. z ( Æ page 22...
Page 48 - Replacing the Lamp unit; Lamp unit replacement time
Care and Replacement Maintenance 48 - E NGLISH Replacing the Lamp unit Air filter J The air filter should be replaced when cleaning is ineffective and when replacing the lamp unit. A replacement air filter is provided with a replacement lamp unit (ET-LAB80). Contact an Authorized Service Center for ...
Page 49 - Lamp replacement procedure; page 22), wait for at least 1 hour, and check if the lamp unit bottom is; used lamp unit gently from the projector.
Care and Replacement Maintenance E NGLISH - 49 J Lamp replacement procedure When the projector is mounted in the ceiling, do not work directly under the projector or put your face close z to the projector. Be sure to install the lamp unit and attach the lamp unit cover securely. If they are not inst...
Page 50 - Press the POWER button and the projection starts.; press▲▼buttons to select LAMP RUNTIME.
Care and Replacement Maintenance 50 - E NGLISH Attach the lamp unit cover and tighten the 2 lamp unit cover fixing screws securely 5 ) with a Phillips-head screwdriver.Connect the power cord to a wall outlet. 6 ) Press the POWER button and the projection starts. 7 ) Remarks If z INITIAL START UP in ...
Page 51 - Troubleshooting
Troubleshooting Maintenance E NGLISH - 51 Troubleshooting Confirm the following problem and cause. Should any problem persist, contact an Authorized Service Center. Problem Cause Page Power does not turn on. The power cord may not be connected securely. z 19 No electric supply at the wall outlet. z ...
Page 52 - Appendix; Technical Information; List of compatible signals
Technical Information Appendix 52 - E NGLISH Technical Information List of compatible signals This projector can project the following image signals. Mode Display resolution (dots) * 1 Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP availability * 3 Terminals H (kHz) V (Hz) NTSC...
Page 53 - Serial terminal; Connection; Communication settings
Technical Information Appendix E NGLISH - 53 Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specifi - cations, so that the projector can be controlled by a personal computer which is connected to this connector. Connection J Co...
Page 54 - Cable specifications; LAN terminal; Name and function of LAN terminal
Technical Information Appendix 54 - E NGLISH J Cable specifications (When connected to a personal computer) Control commands J The following commands are used for control of the projector with a computer. (Operation commands) Command Control contents Remarks PON Power on The PON command is ignored d...
Page 57 - Ceiling mount bracket safeguards
Appendix E NGLISH - 57 Ceiling mount bracket safeguards Installation work of the ceiling mount bracket should only be carried by a qualified technician. z Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused z by using a ceiling mount bracket wh...
Page 58 - Dimensions
Dimensions Appendix 58 - E NGLISH Dimensions Unit: mm 233 (9 - 5/32") 97 3 - 13/16" 88 3 - 7/16" 93 3 - 21/32" - 3/16" 5 4 - 5/32" 9 - 1 1/32" 2 - 1/8" 54.5 3 - 3/32" 368 (14 - 15/32") 3 - 15/32" 88.6 103.6 4 - 1/16" 194.4 7 - 5/8" Trademark acknow...
Page 59 - Index
Index Appendix E NGLISH - 59 Index A Accessories ...................................10 ASPECT ........................................33 AUDIO SETTING ...........................41 AUTO SETUP ..........................25, 37 AV MUTE .......................................24 B BACK COLOR ...............
Page 60 - RANÇAIS; Informations; Cher client Panasonic:; Avis important concernant la sécurité
Avis important concernant la sécurité 60 - F RANÇAIS Informations importantes Cher client Panasonic: Il est important de lire et comprendre les informations suivantes car elles fournissent des détails qui vous permettront d’utiliser le projecteur sans danger pour vous et votre environnement, conform...
Page 61 - Informations importantes
Avis important concernant la sécurité F RANÇAIS - 61 Informations importantes AVERTISSEMENT: Cet équipement a été soumis à des tests qui ont démontré que celui-ci respectait les limites spécifiées pour les appareils numériques de la classe B aux termes de la partie 15 des règles de la FCC (Federal C...
Page 62 - Précautions de sécurité; AVERTISSEMENT; ALIMENTATION
62 - F RANÇAIS Informations importantes Précautions de sécurité AVERTISSEMENT ALIMENTATION La prise de courant ou le disjoncteur doivent être installés à proximité de l’appareil et doivent être d’accès facile en cas de problèmes. Si les problèmes suivants surviennent, coupez immédiatement l’alimen...
Page 63 - Ne jamais entreprendre toute modification; ACCESSOIRES; Si le fluide de la pile fuit, ne pas le toucher; MISE EN GARDE; tenir la fiche et non pas le cordon.
Précautions de sécurité F RANÇAIS - 63 Informations importantes Veillez à ce que le faisceau lumineux n’éclaire pas directement votre peau pendant que vous utilisez le projecteur. Cela peut entraîner des brûlures ou une perte de la vue. Une lumière intense est émise par l’objectif du z projecteur. S...
Page 64 - Précautions lors du transport
Précautions de sécurité 64 - F RANÇAIS Informations importantes LORS DE L’UTILISATION/INSTALLATION Ne pas peser de tout son poids sur ce projecteur. On risque de tomber ou de casser l’appareil, ce qui peut causer des blessures. Veiller tout particulièrement à ce que les enfants ne z se tiennent pa...
Page 65 - Précautions lors de l’utilisation; Afin d’obtenir la meilleure qualité; Sécurité
Précautions de sécurité F RANÇAIS - 65 Informations importantes Précautions lors de l’utilisation Afin d’obtenir la meilleure qualité d’image Fermer les rideaux ou les volets de toutes les fenêtres et éteindre les lampes fluorescentes situées à proximité de l’écran afin que la lumière extérieure o...
Page 66 - Remplacement de l'unité de la lampe; Filtre à air; Quand changer l’unité de la lampe
Remplacement de l'unité de la lampe 66 - F RANÇAIS Informations importantes Remplacement de l'unité de la lampe Filtre à air J Le filtre à air doit être remplacé lorsque le nettoyage ne donne pas de bons résultats ou lors du remplacement de l’unité de lampe. Un filtre à air ainsi qu’une lampe de rec...
Page 67 - Procédure de remplacement de la lampe
Remplacement de l'unité de la lampe F RANÇAIS - 67 Informations importantes Procédure de remplacement de la lampe J En cas d’installation du projecteur au plafond, ne jamais travailler directement dessous et éloigner le visage z du projecteur. S’assurer d’installer l’unité de la lampe et de fixer la...
