Page 2 - qualified service personnel.
2 WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a groun...
Page 4 - Dear Panasonic Customer; Trademark Credits; Macintosh is a registered trademark of Apple Computer, USA.; from your new Plasma TV.
4 For assistance, please call : 1-888-VIEW-PTV(843-9788) or send e-mail to : [email protected] visit us at www.panasonic.com (U.S.A.) For assistance, please call : 787-750-4300 or visit us at www.panasonic.com (Puerto Rico) For assistance, please call : 1-800-561-5505 or visit us at w...
Page 5 - Table of Contents
5 Table of Contents Important Safety Instructions ....................................... 3FCC STATEMENT ........................................................... 6Safety Precautions ......................................................... 7 Cleaning and maintenance .................................
Page 6 - FCC STATEMENT
6 FCC STATEMENT FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment gen...
Page 7 - Safety Precautions; WARNING; Set up; The Plasma TV may fall off or tip over.; AC Power Supply Cord; Doing so may cause electric shocks.; If problems occur during use
7 Safety Precautions WARNING Set up Do not place the Plasma TV on sloped or unstable surfaces. • The Plasma TV may fall off or tip over. Do not place any objects on top of the Plasma TV. • If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could resu...
Page 8 - CAUTION; Always be sure to ask a qualified technician to carry out set-up.; When using the Plasma TV; Be sure to disconnect all cables before moving the Plasma TV.; Electric shocks can result if this is not done.; Clean the power cable regularly to prevent it from becoming dusty.; Cleaning and maintenance; If the cabinet becomes dirty, wipe it with a soft, dry cloth.; to wipe the cabinet, and then wipe it dry with a dry cloth.
8 CAUTION This Plasma TV is for use only with the following optional accessories. Use with any other type of optionalaccessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pe...
Page 9 - Precaution on battery use; Observe the following precautions:; Installation; Receiver Location; you may; Remote Control Battery Installation
9 Precaution on battery use Incorrect installation can cause battery leakage and corrosion thatwill damage the remote control transmitter. Observe the following precautions: 1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set. 2. Do not combine a use...
Page 11 - Connection; – Cable fixing bands; – AC cord fixing
11 Connection 1 2 DEDICATED RECEIVER IN SERVICE USE 1 2 1 2 SPEAKERSTerminals (R) S P E A K E R STerminals (L) – Cable fixing bands Secure any excess cables with bands as required. Note: Please turn off the power of the Plasma Display unit and Digital Media Receiver when connecting or removing Displ...
Page 12 - connect the cable TV’s cable to ANTENNA; VHF; Connection to the display
12 • For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is recommended. • When you enjoy terrestrial TV programs only, connect the home antenna to ANTENNA (A).• When you enjoy cable TV programs only, connect the cable TV’s cable to ANTEN...
Page 13 - AV Connection; VCR Connection
13 Connection AV Connection CableCARD TM CARD TOP (Turn Card upside down and gently insert it.) AUDIO SERVICE ONLY L R Cable In DEDICATED DISPLAY OUT ANTENNA A B DIGITAL AUDIO OUT L L P B L P B P R R P R 2 AUDIO AUDIO OUT COMPONENT VIDEO INPUT PROG OUT INPUT DIGITAL AUDIO OUT AUDIO AUDIO L R VIDEO S...
Page 15 - Amplifier Connection; Procedure; Front AV Connection
15 Connection L L P B L P B P R R P R 2 AUDIO AUDIO OUT COMPONENT VIDEO INPUT PROG OUT INPUT DIGITAL AUDIO OUT AUDIO AUDIO L R VIDEO S VIDEO 1 Y Y R R 2 1 L AUDIO OUT DIGITAL AUDIO OUT R AUDIO INPUT OPTICAL IN R L Amplifier Connection For a full Home Theater sound experience, an external Dolby Digit...
Page 16 - HDMI Connection; Compatible VIDEO Signal
16 AUDIO L R SERVICE ONLY CableCARD TM CARD TOP (Turn Card upside down and gently insert it.) AUDIO Cable In DEDICATED DISPLAY OUT ANTENNA A B DIGITAL AUDIO OUT L R L L P B L P B P R R P R 2 AUDIO AUDIO OUT COMPONENT VIDEO INPUT PROG OUT INPUT AUDIO AUDIO L R VIDEO S VIDEO 1 Y Y R R 2 1 AUDIO OUTPUT...
Page 17 - PC Connection; Signal Names for D-sub 15P Connector
17 Connection PC Connection Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The maximum resolution: I...
Page 18 - Cable cover removal and fitting
18 Connection CableCARD TM Connection CableCARD TM allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable company on the availability of CableCARD TM . Notes: • If you experience keyboard or remote control function hang-up when using CableCARD TM ...
Page 20 - POWER; Turn the TV ON or OFF.; SD; Access Photo Viewer; Mode Selection buttons
20 TV MENU R-TUNE PIP MIN REW PIP MAX FF PLAY PROG EXIT VCR DVD DBS RCVR CBL LIGHT TV/VIDEO A -ANTENNA - B SAP 1 2 3 4 5 6 7 8 0 9 AUX AS PECT M U TE RE CA LL BBE STOP PAUSE FREEZE TV/VCR PIP SPLIT MOVE SWAP SEARCHOPEN/CLOSE SPLIT CH DVD/VCR CH REC CH VOL CH VOL OK POWER Component 2 HDMI TV Componen...
Page 21 - Location of Controls; Add FAV
21 SAP • Digital channel Select the audio track (if available). • Analog channel Cycle through different audio modes.e.g. Stereo SAP Mono LIGHT Light the remote control buttons. The selected button blinks when lit. A -ANTENNA - B Switch to (A or B) RF antenna input. Audio Track 1 of 1 (English) Loca...
Page 22 - Language; First Time Setup; To return to the previous menu; To exit the menu screen; Input Setup
22 Language First Time Setup For your convenience, First Time Setup menu will be displayed on screen when theset is turned on for the first time. If needed, follow the menus and procedures displayedon-screen for setting up the features.You can also make the settings in Setup menu (see pages 36-38). ...
Page 23 - Watching TV programs
23 Watching TV programs MENU R-TUNE PIP MIN REW PIP MAX FF PLAY EXIT VCR DVD DBS RCVR LIGHT SAP AUX AS PECT M U TE RE CA LL BBE STOP PAUSE FREEZE TV/VCR PIP SPLIT MOVE SWAP SEARCHOPEN/CLOSE SPLIT CH DVD/VCR CH REC CH VOL CH VOL OK TV/VIDEO TV CBL A -ANTENNA - B POWER 1 2 3 4 5 6 7 8 9 PROG 0 1 Press...
Page 25 - To return to the previous screen; Press to return to normal picture.; To exit menu; Menu Navigation; Press to select the menu.; Enter password and repeat step 2.
25 Press to return. To return to the previous screen Press to return to normal picture. To exit menu MENU EXIT Menu Navigation [Channel / Setup] CH VOL CH VOL OK Press to select the menu. Press to enter the sub-menu field. P r o c e e d t o a d j u s t m e n tand setting. Password Enter Password - -...
Page 26 - Picture; Pic Mode; Item
26 CH VOL CH VOL OK Press to select Pic Mode. Press to select the picture mode. • Vivid (default) : Provides enhanced picture contrast and sharpness for viewing in a well-lit room. • Standard : Recommended for normal viewing conditions with subdued room lighting. • Cinema : For watching movies in a ...
Page 28 - Audio; AI Sound; Other Adjust
28 CH VOL CH VOL OK Press to select AI Sound. Press to select On or Off. Audio CH VOL CH VOL OK Press to select the sub-menu. Press to adjust or activate the sub-menu. 1 CH VOL CH VOL OK Press to select Other Adjust. Press to display the sub-menu. 2 Press to select the sub-menu. Press to select or a...
Page 29 - Surround
29 Press to select Surround. Press to select On or Off. The benefits of Surround sound are enormous.You can be completely enveloped in sound; just as if you were at a concert hall or cinema.The Surround effect can be obtained without the use of external Ambience speakers. CH VOL CH VOL OK Press to s...
Page 30 - Channel; Surf Mode; Favorite
30 Channel Press to select Surf Mode. Press to select Favorites or All Channels. Press to enter your selection. 1 Press to select Channel. Press to select the channel. Press to add the channel. To delete the channel, press again while the channel number is displayed.• Repeat step 2 to program up to ...
Page 31 - OK; Captions
31 To enter preset and manual labels to desired stations. Also to enter input label to video inputs. Menu Navigation Select the channel (refer to your local TV guide). 4 1 Press to select Preset Labels. Press to enter the sub-menu field. Note: Only inputs with a signal will be selectable. 3 Press to...
Page 32 - Manual Labels
32 1 Press to select Manual Labels. Press to enter the sub-menu field. 3 Press to select Channel. Press to select the available channel number. 4 Press to select Caption. 5 Press to select the character position. Press to select the character (refer to your local TV guide).• Repeat until all charact...
Page 33 - Timer; Input Labels; Clock Set
33 1 Press to select Input Labels. Press to enter the sub-menu field. 2 Press to select the video input. Press to select the preset input label.• To delete Input labels, press until no label is displayed, and then press OK button to enter your selection. • To skip the input, select ‘‘ SKIP ’’. The i...
Page 34 - Set; Day
34 Press to select Set. Press to select Yes or No. CH VOL CH VOL OK Press to select the hour (AM or PM ) or the minutesposition. Press to set the hour (AM or PM) and the minutes. 2 Notes: • The TV automatically turns Off after 90 minutes when turned On by the Timer. It will be cancelled if the Off T...
Page 35 - Select the channel and turn off the TV.; Press to select Sleep.; Sleep
35 To return to the previous screen Press to return. To activate Timer Select the channel and turn off the TV. MENU Menu Navigation Press to select Sleep. Press to select the desired sleep time (No, 30, 60 or 90).• To turn off the timer, select No.• To confirm the remaining time, press RECALL button...
Page 36 - Setup; Program CH
36 Setup CH VOL CH VOL OK Press to select the menu. Press to display the sub-menu. Press to select the antenna mode. Press to enter your selection.• The confirmation message appears. CH VOL CH VOL OK Input Setup Cable/Antenna Auto Scan Setting Manual Program Signal Meter Language Program Channel 1 2...
Page 37 - Manual Program
37 1 3 CH VOL CH VOL OK 1 CH VOL CH VOL OK CH VOL CH VOL OK Press to select Auto Scan. Press to enter the sub-menu field. CH VOL CH VOL OK Press to select the sub-menu. Press to start Auto Scan.• After Auto Scan is completed, press MENU to return to the previous screen. Program Channel Input Setup S...
Page 38 - Signal Meter
38 CH VOL CH VOL OK 1 Press to select Signal Meter. Press to enter the sub-menu field. Press to select the channel. Press to display the Signal Strength.• The color of the signal bar usually indicates the strength of the received signal. Green - Adequate signal for a good reception.Yellow - Poor sig...
Page 39 - Press to select Analog.
39 Press to select Analog. Press to enter the sub-menu field. Closed Caption CC Mode CC1 Analog
Page 40 - Digital
40 Menu Navigation Press to select Digital. Press to enter the sub-menu field. CH VOL CH VOL OK CH VOL CH VOL OK Press to select the sub-menu. Press to select the setting. • Service : Primary, Secondary, Service 3, Service 4, Service 5, Service 6 • Font : Automatic, Default, Mono-serif, Pro-serif, M...
Page 42 - Lock; New Password / Enter Password
42 Lock Enter a 4-digit password. After entering your password for the first time, “NewPassword” will change to “Enter Password”. Notes: • Use a code that is easy to remember and record it in a safe place.• If Always is selected in How Long? (see page 45) and you forget your secret code, the TV must...
Page 43 - RF Input
43 This television incorporates V-CHIP technology to block the viewing of movies and television programs according to therating category. There are four (4) Content Advisory Categories: MPAA (Motion Picture Association of America) and TVParental Guidelines Ratings. These categories are used as guide...
Page 44 - CANADIAN ENGLISH RATINGS CHART
44 U.S. MOVIES RATINGS CHART U.S. TV PROGRAMS RATINGS CHART Menu Navigation CANADIAN ENGLISH RATINGS CHART Description Not Rated. See CUSTOMER CAUTION on page 45. All children. The themes and elements in this program are specificallydesigned for a very young audience, including children from ages 2-...
Page 45 - The Lock settings remain for the selected duration.; Blocking Messages; Message; Lock All is selected.
45 Various Blocking messages are displayed on-screen depending upon the type of blocking you have selected in the Lockmenu. Note: Entering the password will override the block condition. However, the ratings selection will be retained. Press to select How Long? Press to select 12 hours, 24 hours, 48...
Page 46 - Photo Viewer
46 Photo Viewer Photo Viewer lets you display JPEG images recorded by digital camera on SD card or other types of memory card whenit is inserted in the proper card slot. DIGITAL MEDIA RECEIVER TU-PT700U SD CARD PC CARD MENU OK TV/VIDEO VOLUME CHANNEL INPUT 3 PC S VIDEO VIDEO L-AUDIO10-R
Page 47 - Created automatically; Example folder structure; JPEG images in all the folders are displayed sequentially.; Reformatting the card will erase the images stored in it.; Refer to your camera manual for more information.; Folders and Files
47 ROOT DCIM P1000001.jpgP1000002.jpgP1000003.jpgP1000004.jpg P1010001.jpgP1010002.jpgP1010003.jpgP1010004.jpg 100_PANA 101_PANA Created automatically Folder names consist of a 3-digit folder number which is followed by five arbitrary characters. File names consist of four arbitrary characters follo...
Page 48 - Thumbnail Mode; OR; Press to display the thumbnail screen.; To rotate the picture; to return to the thumbnail screen.; Single picture view mode
48 Notes: • You can also enter the thumbnail screen from MENU screen (see page 24).• It may take long time to display the thumbnail if there are lots of files or the file size is large. • The video disappears from the screen while the Photo Viewer access the information from the card. After accessin...
Page 49 - Photo Viewer Setup Menu; ASPECT; Slide Show; Press to adjust or activate the sub-menu.; Interval
49 Photo Viewer Setup Menu This menu allows you to customize features in the Photo Viewer Setup Menu. While in the thumbnail mode or the single picture view mode (see page 48) 1 2 Press to select the sub-menu. Press to adjust or activate the sub-menu. CH VOL CH VOL OK Press to display the Setup Menu...
Page 50 - (While in the single picture view mode only); Rotate
50 Photo Viewer Press to select Rotate. Press to select Left or Right. Press to activate the setting. To access menu see page 49.Allows you to rotate the image (see also page 48). CH VOL CH VOL OK To access menu see page 49. (While in the single picture view mode only) Lets you select the magnificat...
Page 51 - Thumbnail and main picture cannot be shown.; Photo Viewer Troubleshooting
51 Symptom Cannot read the content of the card. PC card cannot be ejected. Poor picture quality. Long time to display. The screen turns black. Cause and remedy • Incompatible format. Must be formatted with FAT 12 or FAT 16. • The extension is not “JPG”.• The folders not under DCF standard. Push the ...
Page 52 - To cancel the PIP operation; In the Main picture; In the PIP frame; To swap the pictures
52 : smaller : larger PIP (Picture in Picture) Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at thesame time with or without an external video source such as a VCR, cable box, etc. 1 Press to display the PIP frame. N...
Page 53 - PIP frame; • Press again to cancel Freeze.; Main Picture; While PIP frame is not displayed; To freeze the picture
53 PIP (Picture in Picture) Operation The input mode changes in PIP frame. (For analog channels only) 1 2 PIP Frame Press to select the channel.• You can also use the numbered buttons. Search frames TV/VIDEO CH # CH # Comp 1 Comp 2 HDMI Video 1 Video 2 Video 3 CH10 CH11 CH12 CH13 CH VOL CH VOL OK SE...
Page 54 - SPLIT Operation; To cancel the SPLIT operation.
54 CH10 CH5 CH5 CH10 SPLIT Operation This feature lets you watch two different channels side by side with or without an external video source. 1 Press to display the SPLIT frame. Notes: • Audio is from Main picture only.• SPLIT frame displays analog channel signal of ANTENNA (A) only, and cannot dis...
Page 55 - SPLIT frame; While SPLIT frame is not displayed; Search frames
55 CH10 TV/VIDEO Notes: • The Main picture and the SPLIT frame are processed by individual circuits, and may have a slight difference in image quality. • You cannot display the same picture in the Main picture and the SPLIT frame at the same time.• While Main picture freeze frame is displayed, you c...
Page 56 - Aspect Controls; Press to change the aspect mode.; Mode; Zoom; The available aspect modes depend on the receiving signal.
56 Aspect Controls Lets you choose the aspect depending on the format of the received signal and your preference. Press to change the aspect mode. Displays a 4:3 picture at its standard 4:3 size withgray side bars. (It may create an after-image onscreen if displayed for a prolonged period of time.) ...
Page 57 - PC MENU; Press to display the PC MENU.
57 CH VOL CH VOL OK PC MENU 1 Press to display the PC MENU. 2 Press to select the sub-menu. Press to display the sub-menu screen. TV VCR DVD DBS RCVR CBL LIGHT TV/VIDEO A -ANTENNA - B SAP 1 2 3 AUX AS PECT M U TE RE CA LL BBE CH VOL CH VOL OK OK
Page 58 - SIGNAL
58 Adjust the horizontal size. Adjust the vertical size. Adjust the horizontal position. Adjust the vertical position. Note: If a “Cue” or “Rew” signal from a VCR or may DVD player is received, the pictureposition may shift up or down despite of the PICTURE POS./SIZE settings. PC MENU NORMAL NORMALI...
Page 59 - Operating peripheral equipment; Programming the remote control code; To find a code not listed in the index
59 Operating peripheral equipment Programming the remote control code You can operate other manufacturers’ components using this TV’s remote control. Preparation: • Connect the plug of the external component to the wall outlet. • Make sure the component is turned off. 1 TV VCR DVD DBS RCVR CBL AUX 2...
Page 60 - Infrared Code Index; Infrared Remote Codes for Specific Components; Codes for VCR; Brand
60 Operating peripheral equipment Infrared Code Index Infrared Remote Codes for Specific Components Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a handy reference whenever you need to reprogram your remote control. CABLE Cable Box DBS ...
Page 61 - Codes for CD; Codes for Cassette Deck
61 Brand Code Panasonic Replay TV 100Philips Tivo 101 Sony Tivo 102 Codes for Personal Video Recorders Brand Code Denon 100 Ferguson 101 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips 103 Pioneer 102 RCA 101 Codes for DVD DVD Brand Code Saba 101 Samsung 110 Sharp 108 Sony 104 Technics 10...
Page 62 - Codes for Receivers; Codes for Cable Box; Codes for DBS
62 Brand Code Admiral 120 Aiwa 125, 126 Denon 134, 135, 136 Fisher 104 Garrard 113 Harman Kardon 115, 123 Jensen 129 JVC 132, 133 Kenwood 100, 108 Magnavox 127 Marantz 124 Mclntosh 116 Nakamichi 106 Onkyo 109, 114 Codes for Receivers Brand Code Optimus 103, 127, 130, 131 Panasonic 118, 119, 121 Phil...
Page 63 - Mode Operational Key Chart; KEY NAME
63 Operating peripheral equipment Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote controlmode, DTV, CABLE, DBS, VCR, DVD ...etc. KEY NAME DTV MODE CABLE MODE DBS MODE POWER POWER POWER NAVIGATION UP/DOWN CABLE ...
Page 64 - AUX MODE
64 POWER POWER POWER POWER POWER POWER POWER - - - - - - RCVR MUTE TV INPUT SW - - - TV INPUT SW - RCVR INPUT SW - - - - - - - - - TUNER +/- - - - - - - - - - - - VOLUME +/- RCVR VOLUME +/- - - - PVR MENU - - - DVD DISPLAY TIME FORMAT - - - - - - EXIT PVR MENU - - - - - - Select Channel - - - - - - ...
Page 65 - Troubleshooting Chart; Symptoms
65 Troubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions. 12, 13 12, 1312, 13 - 2321 11 2923 36 12, 13 19 26,28,29 23 13-1859-6259-64 16 26, 27 23 - 38 21 - 29 39, 40 9 36 Digitalizationof imageImage freeze up Audio Break up Symptoms Solutions VIDEO ...
Page 66 - An after-image appears; Plasma Display panel
66 Troubleshooting Chart Symptoms Some parts of the screendo not light up. An after-image appears Whirring sounds can beheard from the display unit. Plasma Display panel Check • The plasma display panel is manufactured using an extremely high level of precision technology, however, sometimes some pa...
Page 67 - Specifications; Plasma Display unit; Digital Media Receiver
67 Specifications Note: Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate. Power SourcePower Consumption Maximum Stand-by condition Power off condition Display panel Contrast Ratio Screen size (No.of pixels) Dimensions (W × H × D) Display uni...
