Page 2 - Enjoy rich multimedia
2 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. SDXC Logo is a trademark of SD-3C, LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are tradema...
Page 3 - Advanced Features; Please read before using the unit; Quick Start Guide; Contents
3 V iewing Advanced F AQs, etc. Quick Start Guide This product qualifies for ENERGY STAR in the factory default setting and this is the setting in which energy savings will be achieved. Any modifications to the factory default setting or other factory default settings could result in greater energy ...
Page 4 - Safety Precautions; Note to CATV System Installer; CAUTION; RISK OF ELECTRIC SHOCK
4 ANTENNALEAD-IN WIRE ANTENNADISCHARGE UNIT (NEC SECTION 810-20)GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) ELECTRIC SERVICE EQUIPMENT GROUND CLAMP EXAMPLE OF ANTENNA GROUNDING AS PER (NEC) NATIONAL ELECTRICALCODE Safety Prec...
Page 5 - FCC STATEMENT
5 19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines ...
Page 7 - Optional Accessory; Accessories/Optional Accessory; Accessories; Installing the remote’s batteries
7 Quick Start Guide Accessories/Optional Accessory Optional Accessory Wall-hanging bracket TY-WK3L2RW WARNING Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. Back of t...
Page 8 - Assembling the pedestal; Antenna terminal; Reference of connection; Attaching the pedestal to TV
8 Accessories Assembly screws (4 of each) A XSS4+16FJK M4 × 16 B XYN4+F12FJK M4 × 12 Bracket (1) Base (1) ■ Assembling the pedestal Fix securely with assembly screws A . (Total 4 screws) Tighten screws firmly. A Bracket Front Base (Image: TBL2AX0032) ■ Set-up Fix securely with assembly screws . (Tot...
Page 9 - Location; Adjust the stand to your desired angle.
9 Quick Start Guide Accessories/Optional Accessory Accessories A Screws (2) XSN3+4FJ M3 × 4 B Wood screw (4) THM2AB001 C Bit (for pedestal) (1) • Place the TV set in a position where it will not protrude from the table when swiveled. • Make sure there is enough space between the TV set and wall, so ...
Page 10 - Connections; Connection panel; Side panel
10 Connections Connection panel ■ Side panel ■ Back panel RF connection* * For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. th̲32̲37̲42̲lru20̲eng̲0589.indb 10 th̲32̲37̲42̲lru20̲eng̲0589.indb 10 2010/05/19 10:52:57 2010/05/19 1...
Page 11 - Example of connections; To use HDMI terminals; To use COMPONENT terminals; Connecting Antenna
11 Quick Start Guide Connections Note Not all cables and external equipment shown in this book are supplied with the TV. For more details on the external equipment’s connections, please refer to the operating manual for the equipment. Example of connections To use HDMI terminals HDMIAV OUT e.g. Blu-...
Page 12 - To use COMPOSITE terminals; To use AUDIO OUT terminals; To use DATA/MTI terminal; To use SERIAL terminal; To use PC terminal
12 To use COMPOSITE terminals L R or red red red e.g. VCR COMPOSITEOUT yellow white yellow white yellow white e.g. DVD Recorder AV Equipment Side panel Back panel To use AUDIO OUT terminals Connect a cable which matches the audio in terminal on the unit. OPTICAL IN Audio equipment AUDIO IN Audio cab...
Page 13 - Identifying Controls; TV controls/indicators; Remote control
13 Quick Start Guide Identifying Controls Connections Identifying Controls C.A.T.S (Contrast Automatic Tracking System) Power indicator ( on: red, off: no light) Note The TV consumes a small amount of electric energy even when turned off. Do not place any objects between the TV remote control sensor...
Page 14 - TV operation; Turn the TV On with the POWER button; Select a channel number
14 TV operation or Turn the TV On with the POWER button (TV) or (Remote) Input select: press (p. 15) Select a channel number up down or (Remote) To directly enter the digital channel number When tuning to a digital channel, press the button to enter the minor number in a compound channel number. exa...
Page 15 - You can select the external equipment to access.; To return to TV; With the connected equipment turned On; Display the Input select menu; Watching Videos and DVDs
15 V iewing W atching V ideos and DVDs TV operation If you have applicable equipment connected to the TV, you can watch videos and DVDs on the TV screen. Input Select You can select the external equipment to access. To return to TV With the connected equipment turned On Display the Input select menu...
Page 16 - Displaying PC Screen on TV; PC menu setting; Picture; Select “PC”
16 Displaying PC Screen on TV The screen of the PC connected to the unit can be displayed on the TV.You can also listen to PC sound with the audio cable connected. To connect PC (p. 12) PC menu setting (change as desired) Making settings “How to Use Menu Functions” to (p. 19) Menu Item Adjustments/C...
Page 17 - Viewing from an SD card; Press to exit from; Insert the SD card; Manual operation; Select the data to be viewed; View
17 V iewing V iewing from an SD card Displaying PC Screen on TV Viewing from an SD card This function that lets you easily view still images on a television by simply inserting an SD card into the SD card slot.(Media other than SD Cards will not work.) Press to exit from a menu screen Press to retur...
Page 18 - Hotel Mode Setup; Display “Hotel Mode”; Select “Save” then press OK; Complete Hotel Mode setup; Hotel Mode menu
18 Hotel Mode Setup Display “Hotel Mode” Press MENU, G, Y and 0 remote button. Hotel Mode Mode Initial volume TA CtrlInitial inputInitial channel Max. volumeOSD Ctrl Save 1/2 HDMI 1 101-1 On Internal 1025 Off Hotel Mode Button lockPower ctrlRemoteCC resetLock reset 2/2 Pattern 1 On Panasonic OffOff ...
Page 19 - How to Use Menu Functions; Display the menu; Select the menu; Select the item; Adjust or select
19 Advanced How to Use Menu Functions Hotel Mode Setup How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Guest menu (p. 28) Press to exit from a menu screen Press to return to the prev...
Page 20 - Menu list; Audio
20 How to Use Menu Functions Menu list Menu Item Adjustments/Configurations (alternatives) Picture Reset to defaults* Resets all picture adjustments to factory default settings except for “Advanced picture”. Picture mode Basic picture mode (Vivid/Standard/Cinema/Custom) (p. 32) Back light Adjusts th...
Page 21 - Timer; Lock
21 Advanced How to Use Menu Functions (picture, sound quality , etc.) (Continued) Menu list Menu Item Adjustments/Configurations (alternatives) Timer Sleep The TV can automatically turn Off at the designated time (0/15/30/60/90) Lock Locks the programs. (p. 22) Closed caption Closed caption Displays...
Page 22 - Select the Lock mode; Set
22 You can lock specified channels or shows to prevent children from watching objectionable content. Press to exit from a menu screen Caution Make a note of your password in case you forget it. (If you have forgotten your password, consult your local dealer.) Note When you select a locked channel,a ...
Page 24 - Editing and Setting Channels; Select “ANT/Cable setup”; Select the function; To reset the settings of the Setup menu
24 Auto program Setautomatically Manual program Setmanually Signal meter Check signal strength Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions. Press to exit from a menu screen Display the menu Select “Setup” Menu Adjusts Chan...
Page 26 - Closed Caption; Closed caption; Select the item and set; To make more in-depth display settings in digital programs; Select “Digital setting” and press OK; To reset the settings; Select “Reset to defaults”. Confirmation screen is displayed.
26 Press to exit from a menu screen Display the menu Select “Closed caption” Menu Display broadcast TV’s Closed Caption (CC)text when available. Primary CC1 On Closed caption Digital Mode Analog Digital setting Reset to defaults next select Closed Caption Closed caption DisplayClosed caption The tel...
Page 27 - Select “Connected devices”; Select “Input labels” or “Audio out”; Input Labels; Select the terminal and label of the external equipment; Select the terminal and set “Off”
27 Advanced Input Labels Closed Caption Press to exit from a menu screen Display the menu Select “Setup” Menu Adjusts Channels, Inputs, and other settings. Setup 1/2 Advanced setupAboutReset to defaults ECO/energy saving Connected devices Ant/Cable Setup next select Select “Connected devices” Menu C...
Page 28 - Guest Menu; Guest menu
28 Press to exit from a menu screen Display the menu Shows the functions that can be adjusted. Some functions will be disabled depending on the type of input signal. Select the item Menu LockClosed caption SD card Input select Audio mode FULL Screen format 0 Sleep (minutes) Audio track 1 of 2 (Engli...
Page 29 - Ratings List for Lock
29 Advanced F AQs, etc. Ratings List for Lock Guest Menu Ratings List for Lock “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. (p. 23) U.S. MOVIE RATINGS (MPAA) NR NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie...
Page 30 - Technical Information
30 Technical Information Closed caption (CC) For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; characters might be cut off). The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On ...
Page 31 - Cautions in handling SD Card:
31 F AQs, etc. T echnical Information Message Meaning Please insert SD memory card into the SD slot at the side of the TV. The card is not inserted. No photos The card has no data or this type of data is not supported. Cannot read file The file is broken or unreadable. The TV does not support the fo...
Page 32 - HDMI connection; DIGITAL AUDIO OUT terminals
32 HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the devices.HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connect...
Page 33 - PC Input Terminals Connection
33 F AQs, etc. T echnical Information 1 6 7 8 3 9 4 5 10 15 14 13 12 11 2 Input signal that can be displayed * Mark: Applicable input signal for Component (Y, P B , P R ), HDMI and PC horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC 525 (480) / 60i 15.73 59.94 * * 525 (480) /60p ...
Page 34 - Basic format for control data
34 Technical Information (Continued) SERIAL CRTL (RS232C (M3)) terminal connection PC Control of the TV Communication parameters The TV can be controlled by a personal computer when connected through an RS232C cable (not supplied). The computer will require software which allows sending and receivin...
Page 35 - Functions of gray part are not available during online mode.
35 F AQs, etc. T echnical Information SERIAL CTRL (RS232C) command list Functions of gray part are not available during online mode. Control Command Inquiry Command Call back Command Parameter STANDARDCONTROL POWER ON PON QPW QPW:* “0”(OFF)/“1”(ON) POWER OFF POF VOL level AVL:** QAV QAV:*** “000” ~ ...
Page 36 - FAQ
36 FAQ Before requesting service or assistance, please follow these simple guides to resolve the problem.If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. White spots or shadow images (noise) Check the position, direction, and conne...
Page 37 - Screen; Black Box appears; cabinet; The main unit is hot.
37 F AQs, etc. Frequently Asked Questions Problem Actions Screen Sound Other If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the ...
Page 38 - Care and Cleaning; First, unplug the Power cord plug from the wall outlet.; Display panel; Pedestal; Power cord plug
38 Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth. If the surface is particularly dirty, soak a soft, lint-free clot...
Page 39 - Specifications
39 F AQs, etc. Specifications Care and Cleaning Specifications Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. * Based on IEC 62087 Ed.2 section 11.6.1 measurement method. TH-32LRU20 TH-37LRU20 TH-42LRU20 Power Source AC 110-127 V, 60 H...
Page 40 - LIMITS AND EXCLUSIONS; In the USA and Puerto Rico
40 Panasonic Solutions CompanyUnit of Panasonic Corporation of North AmericaThree Panasonic Way, 2F-5, Secaucus, NJ 07094 Panasonic Hospitality LCD HDTV Limited Warranty Models or Parts Part Warranty Labor Warranty Professional FlatPanel Display LIMITS AND EXCLUSIONS There are no express warranties ...
