Page 2 - IMPORTANT SAFETY INSTRUCTIONS; Unit
2 RQT9670 Table of contents IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these inst...
Page 3 - Precautions; CAUTION: TO REDUCE THE RISK OF ELECTRIC; CAUTION; RISK OF ELECTRIC SHOCK
RQT9670 3 Precautions THE FOLLOWING APPLIES ONLY IN THE U.S.A. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference ...
Page 4 - Before use
4 RQT9670 Table of contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 2 Before use Supplied items ................................................................................................... 5 System (SC-HTB350/SC-HTB351) .........................
Page 5 - Supplied items; Check the supplied accessories before using the system.; Accessories
Precautions Reference Getting started Before use Operations RQT9670 5 Before use Supplied items Check the supplied accessories before using the system. ≥ Product numbers are correct as of December 2011. These may be subject to change. ≥ To order accessories, refer to “Accessory Purchases (United Sta...
Page 6 - Control reference guide; Main unit
6 RQT9670 Control reference guide 1 Standby/on switch ( Í /I ) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 2 Adjust the volume of the speakers 3 Select the input source“TV” # “BD/DVD” # “AUX” ^------------- “ ”...
Page 7 - Remote control; To replace a button-type battery; The remote control signal sensor is located on the main unit.
Before use RQT9670 7 1 Turn the main unit on or off ( > 22) 2 Adjust the dialog effect level ( > 22) 3 Adjust the output level of the active subwoofer (bass sound) ( > 22) 4 Adjust the volume of this system ( > 22) 5 Mute the sound ( > 22) 6 Select the TV as the source ( > 22) 7 Se...
Page 8 - Step 1 Selecting the placement method; Choose a placement method that suits you best.; When attaching the speakers to a wall
8 RQT9670 Getting started Step 1 Selecting the placement method ≥ Choose a placement method that suits you best. When attaching the speakers to a wall When placing the speakers on a table Place the speakers horizontally Page 10 Place the speakers vertically Place the speakers using the stands Place ...
Page 9 - Caution; If the stands are being used; Active subwoofer; Main unit/active subwoofer
Getting started RQT9670 9 ≥ Use a screwdriver ( i ) for assembling the speakers. ≥ Do not hold the speakers in one hand to avoid injury, you may drop the speakers when carrying them. When carrying the active subwoofer To avoid interference, maintain the following distances between the main unit/acti...
Page 10 - Step 2 Assembling the speakers; Assemble the speakers.; Place the speakers horizontally; Speakers; “ ” shaped slit
10 RQT9670 Step 2 Assembling the speakers ≥ For a safety measure to prevent the speakers from falling, refer to page 17. ≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers. ≥ The two speakers are interchangeable. When attaching the speakers ...
Page 11 - Connect the speaker cables.; RED; to; White; Push
Getting started RQT9670 11 Connect the speaker cables. ≥ Use the “Panasonic” logo to identify the left and right speakers, then connect the cables (as illustrated). ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. Drive a screw into the wall. ≥ Use the measurements indi...
Page 12 - Attach the front ornaments.; Place the speakers vertically
12 RQT9670 Fit the speaker securely onto the screw(s). ≥ For a safety measure to prevent the speakers from falling, refer to page 17. ≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Attach the front ornaments. ≥ The two speakers are interchangeable. ≥ Keep the...
Page 14 - When placing the speakers on a table; Place the speakers using the stands; Screw hole
14 RQT9670 ≥ For a safety measure to prevent the speakers from falling, refer to page 17. ≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” ( > 10). Attach the stands. ≥ Use th...
Page 15 - Attach the support legs and speaker feet.; Place the speakers using the support legs and
Getting started RQT9670 15 ≥ For a safety measure to prevent the speakers from falling, refer to page 17. ≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following steps 1 and 2 of “Place the speakers horizontally” ( > 10). Attach the ...
Page 16 - Place the speakers using the speaker; Threading hole
16 RQT9670 ≥ For a safety measure to prevent the speakers from falling, refer to page 17. ≥ To prevent damage or scratches, lay down a soft cloth and perform the assembly on it. Assemble the speakers following step 1 of “Place the speakers vertically” ( > 12). Insert the speaker cable through the...
Page 17 - Additional speaker fall prevention measures; Back of the base; Horizontal placement
Getting started RQT9670 17 Connect the speaker cables. ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. ≥ Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect with the speaker cable with a white connector o...
Page 18 - Cord
18 RQT9670 When placing the speakers on a table Horizontal placement Vertical placement A Cord § B Screw eye ≥ Depending on the placement of the speakers, the screwing position of the screw eye may differ. C Wall D Approx. 150 mm (5 29 / 32 q ) § If the cord cannot be threaded through the holes, try...
Page 19 - Step 3 Connections; Connection with the TV; Connection with other devices
Getting started RQT9670 19 Step 3 Connections ≥ Turn off all equipment before connection and read the appropriate owner’s manual. Do not connect the AC power supply cord until all other connections are complete. You can direct the audio signal from the connected Blu-ray Disc player TM , DVD player, ...
Page 20 - To a household AC outlet; The main unit will automatically switch to standby mode; when
20 RQT9670 Match the connector shape and connect to the terminals of the same color. ≥ Connect only after all other connections are complete. ≥ The main unit and active subwoofer consume a small amount of AC power, even when it is turned off (this unit: approx. 0.1 W, active subwoofer: approx. 0.1 W...
Page 21 - BÍ C; WIRELESS LINK indicator lights; Preparation; Pairing a device
Getting started RQT9670 21 Preparation ≥ Turn on the main unit. Press [ BÍ C I]. Check that the wireless link is activated. WIRELESS LINK indicator lights ≥ Red: The wireless link is not activated. ≥ Green: The wireless link is activated. The unit will still consume a small amount of power even when...
Page 22 - Using this unit; Press; Indication
22 RQT9670 Operations Using this unit Preparation ≥ Turn on the TV and/or connected device. Press [ Í ] to turn on the main unit. Select the source. ≥ This remote control cannot be used to control the operations of the connected devices. ∫ When “ ” is selected as the source On the Bluetooth ® device...
Page 23 - While the indicator is blinking, press; D sound; To change the audio output
Operations RQT9670 23 This system provides a feeling that the sound and the image are as one. The 3D sound effect will be applied to Multi-channel audio sources as a factory preset. Dolby Virtual Speaker and the 3D surround effects can be turned off and on by changing the audio output mode settings....
Page 24 - Advanced operations; Auto gain control is on.
24 RQT9670 Advanced operations Change the dual audio from main to secondary. Confirm the digital audio output setting on the connected TV or player, etc. is set to “Bitstream”.Press and hold [TV] for more than 2 sec.While the indicator of the current setting is blinking, press [TV] to change the set...
Page 25 - Remote control code; Change the remote control code to code 2:; control for more than 4 sec.; To reduce the clear-mode dialog effect; To turn off the volume limitation
Operations RQT9670 25 ∫ Remote control code When other Panasonic devices respond to this system’s remote control, change the remote control code on the main unit and the remote control. Preparation ≥ Turn off all other Panasonic products. ≥ Turn on the main unit. Change the remote control code to co...
Page 26 - Troubleshooting; The remote control code will return to “1” when; General operation
26 RQT9670 Reference Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to “Customer Services Directory (United States and Puerto Rico)” on page...
Page 27 - About Bluetooth; Active Subwoofer
Reference RQT9670 27 The dialog is too persistent or the dialog does not sound natural. This system has a function to make the dialog stand out when the volume is low. ( > 25) There is no audio.The power of the main unit turns off automatically. (When the main unit detects a problem, a safety mea...
Page 28 - Indicator illumination; 6) if the indicators do not light up as illustrated below.
28 RQT9670 Indicator illumination The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” ( > 26) if the indicators d...
Page 29 - Specifications; AMPLIFIER SECTION; Impedance; GENERAL; Active subwoofer: 21 W
Reference RQT9670 29 Specifications AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Subwoofer ch 120 W per channel (100 Hz, 8 ≠ ) Front ch (L, R ch) 60 W per channel (1 kHz, 6 ≠ ) Total RMS Dolby Digital mode power 240 W FTC output power 1.0 % total harmonic distortion Subwoofer ch...
Page 31 - Limited Warranty; Panasonic Home Audio Products Limited Warranty; Limited Warranty Limits And Exclusions
Reference RQT9670 31 Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO) Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Home Audio Products Limited Warranty Limited Warranty Coverage(For...
Page 32 - Printed in Malaysia; Panasonic Consumer Marketing; Unit care; Clean the system with a soft, dry cloth
Panasonic Corporation 2011 Printed in Malaysia One Panasonic Way, Secaucus, New Jersey 07094 http://www.panasonic.com Panasonic Consumer Marketing Company of North America, Division of Panasonic Corporation of North America RQT9670-2P F1211RK2032 -If you see this symbol- Unit care ∫ Clean the system...
