Page 2 - Important Safety Notice; Dear Panasonic Customer:
Important Information E NGLISH - 2 Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic DLP...
Page 3 - For business users in the European Union
Important Information Important Safety Notice E NGLISH - 3 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed ...
Page 5 - Contents; Quick steps; Connect with other devices; See “Setting up” on page 16.; Prepare the Remote control; See “Remote control” on page 14.
E NGLISH - 5 Important Information Getting Started Basic O p eration Maintenance Appendix Preparation Contents Quick steps Important Safety Notice ..............................................2Precautions with regard to safety .............................6 WARNINGS .................................
Page 6 - Precautions with regard to safety; WARNINGS
Important Information E NGLISH - 6 Precautions with regard to safety If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. Do not continue to use the projector in such cases, otherwise fire or electric shocks could result. Check ...
Page 7 - Important; CAUTIONS
Precautions with regard to safety E NGLISH - 7 Important Information Do not touch the leaked liquid from the batteries. If you touch the leaked liquid, it may hurt your skin. Immediately wash away the liquid with water and seek medical advice. If you get the leaked liquid in your eye, it may cau...
Page 9 - Cautions when transporting
Precautions with regard to safety E NGLISH - 9 Important Information Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens. Failure to observe this may cause injury. Replacement of the lamp unit should only be carried out after it has completely...
Page 10 - Others
Precautions with regard to safety E NGLISH - 10 Important Information The projector has a high pressure mercury lamp and that is characterised as follows. The brightness of the lamp depends on the duration of use. The lamp may explode or shorten the lamp life by shocks or chipping damage. The ...
Page 11 - Accessories
Precautions with regard to safety E NGLISH - 11 Important Information Make sure the following accessories are provided with your projector. * The protectors for enclosed products, such as a plug cover or foam cartons, must be treated properly.* Contact to an Authorised Service Centre for lost access...
Page 12 - Preparation; About Your Projector; Top, front and bottom view; Projector body
E NGLISH - 12 Preparation About Your Projector Top, front and bottom view Projector body NOTE: • Do not cover the ventilation openings or place anything within 50 cm (20") of them as this may cause damage or injury.• While the projector is not in use, keep the projector lens cover attached to ...
Page 14 - Remote control
Preparation About Your Projector E NGLISH - 14 Remote control POWER ON and POWER STANDBY buttons POWER ON : Starts the projection while in the standby mode. POWER STANDBY : Returns to the standby mode. (page 19) INPUT SELECT buttons These buttons select the RGB1 , RGB2 , DVI-D , VIDEO , S-VIDEO and ...
Page 15 - Using a wired remote control
Preparation About Your Projector E NGLISH - 15 Setting projector ID number to remote control Each projector can be assigned a unique 2 digits ID number, and the remote control 2 digits ID number must be set to match the intended projector. The default setting of the projector ID is ALL . Set the I...
Page 16 - Getting Started; Setting up; Cautions when setting the projectors; Projection method
Getting Started E NGLISH - 16 Setting up You can use the projector with any of the following 4 projection methods. To set the desired method in the projector, Cautions when setting the projectors When placing the projector in confined space, a ventilation or air conditioning system must be equippe...
Page 17 - Removing and attaching the projection lens
Getting Started Setting up E NGLISH - 17 Removing the projection lens from the projector 1. Switch off the POWER button on the projector. 2. Rotate the lens cover counterclockwise and remove. 3. While pressing the lens release button, rotate the projection lens counterclockwise, and remove the pro...
Page 18 - Disconnecting; Mains lead
Getting Started Setting up E NGLISH - 18 Connecting 1. Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in. 2. Align the side of the “power cord secure lock” with the side guide rail of the AC IN terminal of the project...
Page 19 - Projecting; Switching on the projector; Adjusting focus, zoom and shift; Projecting a image
E NGLISH - 19 Basic O p eration Projecting Switching on the projector When using an optional lens, install a projection lens before switch on the projector. 1. Connect the supplied mains lead (220 - 240 V AC, 50 Hz/60 Hz) to the AC IN terminal. 2. Remove the projection lens cover from the lens.3. ...
Page 20 - Direct power off function
Basic O p eration Projecting E NGLISH - 20 Switching off the projector 1. Press the POWER STANDBY button. The confirmation screen will be displayed. 2. Select OK and press the ENTER button, or press the POWER STANDBY button again. The projection of the image stops, and the power indicator of t...
Page 21 - Remote control operation; Facing to the projector; Operating range
E NGLISH - 21 Basic O p eration Remote control operation You can operate the projector with the remote control within the remote range 30 m (98'5"), approximately ± 30° horizontally and ± 15° vertically. Facing to the projector Ensure the remote control emitter is facing to the remote control ...
Page 22 - Appearance sample; Switching the input signal; Stopping the projection
Basic O p eration Remote control operation E NGLISH - 22 You can use the remote control to switch the signals that are being input and projected. If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is available that allows the user t...
Page 23 - Using an assigned function
Basic O p eration Remote control operation E NGLISH - 23 You can assign a selected function to the FUNCTION button. Following functions are assignable. Pressing this button displays several pages of projector status information. If an adjustment item is selected and press the DEFAULT button, the adj...
Page 24 - Menu Navigation; PICTURE; Main menu and Sub-menu
E NGLISH - 24 Basic O p eration Menu Navigation The menu options are structured and categorised. You can navigate through the menu with F G I H buttons. See “Navigating through the menu” on page 27. Some default settings vary by the selected input signal. Sub-menu items vary according to the sel...
Page 25 - Basic O; DISPLAY OPTION
Menu Navigation E NGLISH - 25 Basic O p eration DISPLAY OPTION PROJECTOR SETUP TEST PATTERN SIGNAL LIST COLOR MATCHING * OFF 3 COLORS 7 COLORS MEASURED COLOR CORRECTION OFF USER CONTRAST MODE * NORMAL HIGH SCREEN SETTING SCREEN FORMAT 16:10 16:9 4:3 SCREEN POSITION AUTO SIGNAL ON OFF AUTO SETUP DEFA...
Page 26 - Settings; SECURITY PASSWORD; NETWORK SETUP
Settings Menu Navigation E NGLISH - 26 SECURITY NETWORK SECURITY PASSWORD OFF ON SECURITY PASSWORD CHANGEDISPLAY SETTING OFF TEXT LOGO1 LOGO2 TEXT CHANGEMENU LOCK OFF ON MENU LOCK PASSWORDCONTROL DEVICE SETUP CONTROL PANEL ENABLE DISABLE REMOTE CONTROLLER ENABLE DISABLE NETWORK SETUP HOST NAME DHCP ...
Page 27 - Displaying the Main menu; Returning to the previous menu; Operating procedure; Navigating through the menu
Menu Navigation E NGLISH - 27 Basic O p eration Displaying the Main menu Press the MENU button to display the main menu. Adjusting with the bar scale items The triangle mark under the bar indicates factory default setting and the square indicates the current setting. Returning to the previous ...
Page 28 - Maintenance; Monitor Lamp indicators; LAMP1/LAMP2 indicator; Managing the indicated problems
E NGLISH - 28 Maintenance Monitor Lamp indicators If a problem should occur with the projector, the indicators will inform you. Manage the indicated problems as follow. 1. Confirm the status of all indicators and projector, and switch off the projector in proper way.2. Find out the cause of the prob...
Page 29 - FILTER indicator
Monitor Lamp indicators E NGLISH - 29 Maintenance FILTER indicator The FILTER indicates the Auto Cleaning Filter (ACF) unit status. Lamp indication Information Check point Remedial measure Lighting in red The ACF unit has run out. • Check the REMAINING FILTER of STATUS in PROJECTOR SETUP menu. • R...
Page 30 - Replacement; Before replacing the Lamp unit; When to replace the lamp unit; Replacing the Lamp unit; LAMP
E NGLISH - 30 Maintenance Replacement Before replacing the Lamp unit T urn off the POWER switch of the projector in proper way and disconnect the mains plug from the mains socket. Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough. Prepare a Phillips...
Page 31 - Replacement procedure; Removing and replacing the lamp unit
Replacement E NGLISH - 31 Maintenance Replacement procedure Removing and replacing the lamp unit 1. Use a Phillips-head screwdriver to loosen the “lamp unit cover fixing screw” (1 screw) on the back of the projector until the screws turn freely, and remove the lamp unit cover. Slide the lamp u...
Page 33 - Troubleshooting
E NGLISH - 33 Maintenance Troubleshooting Should any problem persist, contact your dealer. Problem Cause Reference page *1 *1. CD-ROM: See the functional instructions in the provided CD-ROM. Power does not turn on. The mains lead may not be connected. The POWER switch is turned off. No electri...
Page 34 - Appendix; Technical Information; List of compatible signals
E NGLISH - 34 Appendix Technical Information List of compatible signals Mode Display resolution (dots) *1 Scanning frequency Dot clock frequency Picture quality *2 PnP *3 Format *4 H (kHz) V (Hz) (MHz) RGB2 DVI-D EIDI1 DVI-D EIDI2 NTSC/NTSC 4.43/ PAL-M/PAL60 720 x 480i 15.7 59.9 - A V/S PAL/PAL-N/SE...
Page 35 - Display dots of each model
Technical Information E NGLISH - 35 Appendix Display dots of each model WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 A D/R 1 920 x 1 080 *9 1 920 x 1 080 66.6 59.9 138.5 AA *5 WUXGA *9 1 920 x 1 200 74.0 60.0 154.0 AA *8 D D *1. The “i” appearing after the resolution indicates an interlaced signal. Flicke...
Page 36 - Specifications
Appendix Technical Information E NGLISH - 36 Specifications Power supply AC 220 - 240 V 50 Hz/60 Hz Power consumption • PT-DZ6710E/PT-DZ6700E: 800 W• PT-DW6300E/PT-D6000E: 750 W• PT-D5000E: 600 W During standby (when fan is stopped): Approx. 9 W *1 Amps • PT-DZ6710E/PT-DZ6700E: 4.3 A• PT-DW6300E/PT-...
Page 38 - Ceiling mount bracket safeguards
Appendix Technical Information E NGLISH - 38 The projector and the ceiling mount bracket are designed sufficiently safety though, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mounting in the ceiling for safety and security. In...
Page 39 - Dimensions
Technical Information E NGLISH - 39 Appendix Microsoft and Microsoft logos, Windows, Windows ® XP, and Windows Vista ® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other types of names such as company names and product names ap...
Page 40 - Index
E NGLISH - 40 Appendix Index A Accessories .................................................................... 11 Air exhaust port .............................................................. 12 Air intake port ................................................................. 13 ASPECT Remote con...
