Page 2 - NGLISH; Important; Important Safety Notice; Dear Panasonic Customer:; Do not remove; Important Information
2 - E NGLISH Important Information Important Safety Notice Dear Panasonic Customer: The following information should be read and understood as it provides details, which will enable you to operate the projector in a manner which is both safe to you and your environment, and conforms to legal require...
Page 3 - Important Information; - Reorient or relocate the receiving antenna.; Declaration of Conformity; Environment care information for users in China
Important Safety Notice E NGLISH - 3 Important Information WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi...
Page 4 - Quick steps; See “Setting up” on page 14.; Lens Memory
4 - E NGLISH Quick steps J Set up your projector 1. See “Setting up” on page 14. Connect with other devices 2. See “Connections” on page 15. Prepare the remote control 3. See “Remote control” on page 11. Start projecting 4. See “Switching the projector on/off” on page 16. Adjust the image 5. See “Me...
Page 5 - Contents
E NGLISH - 5 Important Information Preparation Settings Maintenance Appendix Getting Started Basic Operation Contents Important Information Important Safety Notice ................................ 2 Precautions with regard to safety ................ 6 WARNING ...........................................
Page 6 - Precautions with regard to safety; WARNING; POWER
6 - E NGLISH Important Information Precautions with regard to safety WARNING POWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use o...
Page 7 - ACCESSORIES; CAUTION
Precautions with regard to safety E NGLISH - 7 Important Information Do not place your hands or other objects close to the air outlet port. Doing so will cause burns or damage your hands or other objects. Heated air comes out of the air outlet port. Do not z place your hands or face, or objects whic...
Page 8 - Cautions when transporting
Precautions with regard to safety 8 - E NGLISH Important Information ON USE/INSTALLATION Do not put your weight on this projector. You could fall or the projector could break, and injury will result. Be especially careful not to let young children stand z or sit on the projector. Do not place the ...
Page 9 - Cautions on use; Cleaning and maintenance; Disposal
Precautions with regard to safety E NGLISH - 9 Important Information Cautions on use In order to get the picture quality Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Depending on where...
Page 10 - Accessories
Precautions with regard to safety 10 - E NGLISH Important Information Accessories Make sure the following accessories are provided with your projector. Remote control for N2QAYB000450 Safety cable TTRA0141 Attachment screw (x1) Safety cable (x1) Lens cover (x1) TXFKK01REGZ (Attached to the projector...
Page 11 - About Your Projector; Preparation
E NGLISH - 11 Preparation About Your Projector Remote control Power button While MAIN POWER is on, switch between standby mode and projection mode. Button backlight When any button is pressed, the button backlight is lit. Without any operation, it gets darker after 5 seconds and goes off after next ...
Page 12 - Projector body; Top and front view
About Your Projector 12 - E NGLISH Preparation Projector body Top and front view J Air exhaust port Heated air comes out of this opening. Lens shift dials • Vertical Lens shift dials • Horizontal Projection lens Power/LAMP/TEMP indicators Air filter MAIN POWER Switch the projector on/off. Lens cover...
Page 13 - Back and bottom view
About Your Projector E NGLISH - 13 Preparation Back and bottom view J Air intake port Security lock Attach the commercial shackle lock which is provided with the projector. Compatible with the Kensington MicroSaver Security System. Front leg adjusters Screw up/down to adjust the projection angle. Le...
Page 14 - Getting; Setting up; Screen size and throw distance; Projection method; Getting Started
14 - E NGLISH Getting Started Setting up Screen size and throw distance You can adjust the projection size with 2 × zoom lens. Calculate and define the throw distance as follows. Projected image SD SW S H Screen Screen All measurements and the calculation results below are approximate and may differ...
Page 15 - Lens shift and positioning; Adjusting the lens shift dials; Horizontal shift; Vertical shift; Connections; Before connecting to the projector
Setting up E NGLISH - 15 Getting Started Lens shift and positioning If the projector is not positioned right in front of the center of the screen, you can adjust the projected image position by moving the lens shift dials within the shift range of the lens. Adjusting the lens shift dials J Horizonta...
Page 16 - Basic; Switching the projector on/off; Basic Operation; Power cord; Connecting; Disconnecting; Power indicator
16 - E NGLISH Basic Operation Switching the projector on/off Basic Operation Power cord Connecting J Make sure the shape of the power plug and the 1. AC IN terminal on the back of the projector match, then push the plug all the way in. Align the side of the 2. power cord secure lock with the side gu...
Page 17 - Switching on the projector; Switching off the projector
Switching the projector on/off E NGLISH - 17 Basic Operation Switching on the projector (2) (3) (1) Power indicator Remove the lens cover from the lens. 1. Switch 2. MAIN POWER on. The power indicator lights up in red. Press the power button. 3. The power indicator lights up in green after flashing ...
Page 18 - Projecting an image; Selecting the input signal; Positioning the image
18 - E NGLISH Basic Operation Projecting an image Selecting the input signal Switch on the connected devices. 1. Press the play button of the required device. Press the 2. INPUT SELECT button to select the required input method if needed. See “Switching the input signal” of the functional instructio...
Page 19 - Settings; Settings; Navigating through the MENU
Menu Navigation E NGLISH - 19 Settings Menu Navigation Settings Navigating through the MENU J Displaying the main menu Press the MENU button to display the main menu and the operating guidance. Main menu Operating guidance Contains the required buttons to adjust the settings. Sub-menu Current settin...
Page 20 - Menu list
Menu Navigation 20 - E NGLISH Settings Menu list The menu options are structured and categorized. You can navigate through the menu with ▲ ▼ ◄ ► buttons. NOTE: The underlined items are factory default settings. • Some default settings vary by the selected input signal. • Sub-menu items vary accordin...
Page 21 - LANGUAGE; LENS CONTROL; FUNCTION BUTTON; VIERA LINK
Menu Navigation E NGLISH - 21 Settings POSITION It is possible to adjust the image size and position. H-POSITION (Default: 0) V-POSITION (Default: 0) DOT CLOCK (Default: 0) CLOCK PHASE (Default: 0) ASPECT 4:3 16:9 s16:9 14:9 ZOOM ZOOM1 ZOOM2 JUST AUTO H-FIT V-FIT WSS ON OFF OVER SCAN KEYSTONE (Defau...
Page 22 - OPTION
Menu Navigation 22 - E NGLISH Settings OPTION It is possible to change the option settings. INPUT GUIDE DETAILED OFF SIMPLE OSD DESIGN TYPE1 TYPE2 TYPE3 OSD POSITION CENTER LOWER LEFT LOWER CENTER LOWER RIGHT UPPER LEFT UPPER CENTER UPPER RIGHT BACK COLOR BLUE BLACK STARTUP LOGO ON OFF AUTO SEARCH O...
Page 23 - VIERA LinkTM; VIERA Link Control; Access and operate the menu of the equipment
E NGLISH - 23 Settings VIERA Link™ Using the Link functions (VIERA Link) VIERA Link Control J You can control some functions of the connected equipment with this projector remote control. If you cannot operate, check the settings and the equipment. For details of the operations for the connected equ...
Page 24 - Speaker control; Access and operate the speaker volume; MUTE setting; Other manufacturer’s equipment control; Access and operate the menu of the other manufacturer’s equipment
VIERA Link™ 24 - E NGLISH Settings Speaker control J You can control the theater speaker with this projector remote control. If you cannot operate, check the settings and the equipment. Access and operate the speaker volume Q Select 1. HOME THEATER VOLUME in the VIERA LINK menu and press the ENTER b...
Page 25 - TEMP and LAMP Indicators; Managing the indicated problems; TEMP indicator; LAMP indicator; Maintenance
E NGLISH - 25 Maintenance TEMP and LAMP Indicators Managing the indicated problems If a problem should occur with the projector, the LAMP and/or TEMP indicators will inform you. Manage the indicated problems as follows. Confirm the status of all indicators and projector, and switch off 1. the projec...
Page 26 - Care and Replacement; Cleaning the projector; Before cleaning the projector; Cleaning the outer surface of the projector; Cleaning the lens surface; Cleaning the air filter; Replacing the air filter
26 - E NGLISH Maintenance Care and Replacement Cleaning the projector Before cleaning the projector J Switch off MAIN POWER in proper way and disconnect the power plug from the wall outlet. Unplug all the cables from the projector. Cleaning the outer surface of the projector J Wipe off dirt and dust...
Page 27 - Replacing the lamp unit; Before replacing the lamp unit; NOTE: When the projector is mounted on
Care and Replacement E NGLISH - 27 Maintenance Replacing the lamp unit Before replacing the lamp unit J Switch off MAIN POWER in proper way and disconnect the power plug from the wall outlet. Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough. Unplug all the...
Page 28 - Removing and replacing the lamp unit
Care and Replacement 28 - E NGLISH Maintenance Removing and replacing the lamp unit J Use a Phillips screwdriver to loosen the 3 lamp 1. unit fixing screws until the screws turn freely. Lamp unit lock Lamp unit fixing screws Hold the handle of the lamp unit and release the 2. lamp unit lock in the d...
Page 29 - Troubleshooting
E NGLISH - 29 Maintenance Troubleshooting Should any problem persist, contact your dealer. Problem Cause Reference page Power does not turn on. The power cord may not be connected. 16 MAIN POWER is turned off. 17 No electric supply is at the wall outlet. 16 TEMP indicator is lit or flashes. 25 LAMP ...
Page 30 - Technical Information; Appendix; Ceiling mount bracket safeguards; Installing the safety cable
30 - E NGLISH Appendix Technical Information Appendix Ceiling mount bracket safeguards The projector and the ceiling mount bracket are designed for sufficient safety. However, make sure the safety cable provided with the projector is installed and attached to the bottom of the projector when mountin...
Page 31 - List of compatible signals
Technical Information E NGLISH - 31 Appendix List of compatible signals Mode Display Display resolution (dots) *1 Scanning frequency Dot clock frequency (MHz) Picture quality *2 Format H (kHz) V (Hz) NTSC/NTSC 4.43/ PAL-M/PAL60 - 720 × 480i 15.7 59.9 - A VIDEO/S-VIDEO PAL/PAL-N/SECAM - 720 × 576i 15...
Page 34 - Trademark acknowledgements; Dimensions
Technical Information 34 - E NGLISH Appendix Trademark acknowledgements HDAVI Control™ and VIERA Link™ are trademarks. VGA and XGA are trademarks of International Business Machines Corporation. S-VGA is a registered trademark of the Video Electronics Standards Association. HDMI, the HDMI logo and Hi...
Page 35 - Index
E NGLISH - 35 Appendix Index A Accessories .................................. 10 AC IN ........................................... 13 Air exhaust port ............................ 12 Air filter ......................................... 12 Replacing .............................. 26 Air intake port ....
