Panasonic panasonic - Manual
Panasonic panasonic – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Information; Take special care to follow the safety suggestions listed below.; basements should also be avoided.; Note: In this manual, the suffix of each model number is omitted.
- Page 3 – Features List
- Page 4 – Feature
- Page 5 – Using the Call Log or Directories; You can make a call with the call log or directories as follows:; Calling with a call log or directory; • To cancel or exit, press; While confirming the log information; Using the Display Proprietary Telephone
- Page 6 – Accessing the System Features; You can access these features with the “Feature Access” menu:; Door Open; name; External Background Music; While in hands-free conversation; While using the handset or headset; Ring Tone; Setting
- Page 7 – Setting Features; Selection & Parameter; Ringing; Tone 1; Yes–ON in use; Settings on the Programming Mode
- Page 8 – No–Off; Off; returns to normal status.; To exit the mode at any time, lift the handset.
- Page 9 – Location of Controls
- Page 10 – Entering Characters
- Page 11 – Table 2 (Option mode when connected to GR model of Hybrid IP-PBX); Ψ Ω; Ethernet cable (Straight CAT 5 or higher cable) [not included]
- Page 12 – To lift: Lift up the operation board to the desired; Pull down the handset hook until it locks to prevent the
IP Proprietary Telephone
Quick Reference Guide
Model No.
KX-NT136
Important Information
When using the KX-NT136, keep the following conditions in mind.
•
•
•
•
•
•
•
•
•
•
If the unit does not operate properly, disconnect the unit from the Ethernet® cable and
then connect again.
If you are having problems making calls, unplug the Ethernet cable and connect a known
working IP Proprietary Telephone (IP-PT). If the known working IP-PT operates properly,
have the defective IP-PT repaired by an authorised Panasonic Factory Service Centre.
If the known working IP-PT does not operate properly, check the Hybrid IP-PBX and the
Ethernet cable.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with
chemical agents such as benzene or thinner.
Use only the correct Panasonic handset.
Do not disassemble this unit. Dangerous electrical shock could result. The unit must
only be disassembled and repaired by qualified service technicians.
If damage to the unit exposes any internal parts, immediately disconnect the cable or cord.
If the power is supplied from the network to the IP-PT [Power-over-Ethernet], disconnect
the Ethernet cable. Otherwise, disconnect the AC adaptor cord. Then return this unit to a
service centre.
Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
This unit is designed to aid the visually handicapped to locate dial keys and buttons.
This unit is designed to be installed under controlled conditions of ambient temperature
and a relative humidity.
Avoid installing the unit in damp or humid environments, such as bathrooms or swimming
pools.
999 and 112 can be dialled on the product after accessing the CO line for the purpose of making
outgoing calls to the BT emergency (999) and (112) services (United Kingdom only).
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.
IMPORTANT NOTICE:
• Under power failure conditions, the IP-PT may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for use in an emergency.
• For information regarding network setup of the IP-PT such as IP address, please
refer to the Installation Manual for the Panasonic Hybrid IP-PBX.
• If an error message is shown on your display consult the network administrator.
• The firmware of the KX-NT136 is protected by copyright laws and international treaty
provisions, and all other applicable laws. It can not be reverse engineered, decompiled
or disassembled.
•
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Important Information This unit is capable of being used in conjunction with hearing aids fitted with inductive coil pick-ups. The handset should be held as for normal conversation. For operation, the hearing aid should be set to its “T” position or as directed in the operating instructions for th...
3 Feature Operation To dial To an extension — assigned as a One-touch Dialling button To dial To store To store desired no. (max. 32 digits) 3 2 0 Redial Quick Dialling One-touch Dialling Operator Call PersonalSpeed Dialling SystemSpeed Dialling Doorphone Call Automatic Callback Busy Making Calls qu...
4 Features List Feature Operation Useful Features Off-hook Monitor During a conversation using the handset During a conversation To set/cancel Call Park To set 5 2 To retrieve 5 2 C. Tone Specified Auto parking zone no. (2 digits) stored parking zone no. (2 digits) Sending a Call Waiting Tone 1 Whil...
