Panasonic KX-TG5511BX - Manual

Important Information 5 For your safety To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection L Use only the power source marked on the product. L Do not overload power ou...

Important Information 6 Battery L We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni- MH batteries AAA (R03) size. L Do not mix old and new batteries. L Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury t...

Important Information 7 L Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care L Wipe the outer surface of the product with a soft moist cloth. L Do not use benzine, thinner, or any abrasive powder. Other information Notice f...

Getting Started 8 Setting up Connections L Use only the supplied Panasonic AC adaptor PQLV219BX. ■ Base unit (KX-TG5511) *DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service. ■ Base unit (KX-TG6511/KX-TG6512/KX-TG6513/KX-TG6519/KX-TG6521) *DSL/ADSL filter (not supplied) is requir...

Getting Started 9 L Confirm correct polarities ( S , T ). Battery charge Charge for about 7 hours. L When the batteries are fully charged, the charge indicator goes off and “ Fully charged ” is displayed. Note when setting up Note for connections L The AC adaptor must remain connected at all times. ...

Getting Started 10 Battery level Panasonic Ni-MH battery performance (supplied batteries) Note: L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use). L Actual battery performance de...

Getting Started 11 J Microphone K Charge contacts ■ Control type A Soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. B Navigator key – {^} , {V} , { < } , or { > } : Scroll through various lists and items. – {...

Getting Started 12 K Microphone L Charge contacts ■ Control type A Soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. B Navigator key – {^} , {V} , { < } , or { > } : Scroll through various lists and items. – ?...

Getting Started 13 Display Handset display items *1 KX-TG6512/KX-TG6513*2 Caller ID subscribers only*3 KX-TG6521*4 Voice mail subscribers only Soft key icons Item Meaning w Within base unit range _ Out of base unit range x Paging, intercom mode. *1 s Speakerphone is on. (page 16) C The line is in us...

Getting Started 14 *1 KX-TG6512/KX-TG6513*2 KX-TG6521 Turning the power on/off Power on Press {i c } for about 1 second. Power off Press {i c } for about 2 seconds. Initial settings Display language 3 display languages are available.You can select “ English ” , “ ” , or “ ” . 1 8 i { # }{ 1 }{ 1 }{ ...

Getting Started 15 4 M i {i c } Note: L When you select Arabic or Persian as the display language, enter the current year, month, and date. L To correct a digit, press { < } or { > } to move the cursor to the digit, then make the correction. L The date and time may be incorrect after a power f...

Making/Answering Calls 16 Making calls 1 Lift the handset and dial the phone number. L To correct a digit, press ^ . 2 Press {C} or ] . 3 When you finish talking, press {i c } or place the handset on the base unit or charger. Using the speakerphone 1 Dial the phone number and press {s} . L Speak alt...

Making/Answering Calls 17 Adjusting the handset ringer volume Press {^} or {V} repeatedly to select the desired volume while the handset is ringing for an incoming call. Note: L You can also program the handset ringer volume beforehand (page 23). Temporary handset ringer off While the handset is rin...

Making/Answering Calls 18 1 Make a call. 2 Press {*} when prompted to enter your code or PIN, then press the appropriate dial keys. Note: L The dialling mode will return to pulse when you hang up. Call share You can join an existing outside call.To join the conversation, press {C} when the other han...

Phonebook 19 Handset phonebook The phonebook allows you to make calls without having to dial manually. You can add 100 names and phone numbers. Adding entries1 n i m 2 Enter the party’s name (16 characters max.). i M L You can change the character entry mode by pressing / (page 39). 3 Enter the part...

Phonebook 20 have stored in the phonebook, without having to dial manually. 1 During an outside call, press 8 . 2 {V} / {^} : “ Phonebook ” i M 3 {V} / {^} : Select the desired entry. 4 Press ] to dial the number. Note: L When storing a calling card access number and your PIN in the phonebook as one...

Programming 21 Programmable settings You can customise the unit by programming the following features using the handset.To access the features, there are 2 methods:– scrolling through the display menus (page 21)– using the direct commands (page 23) L Direct command is the main method used in these o...

Programming 23 Programming using the direct commands1 8 i { # } 2 Enter the desired code. 3 Select the desired setting. i M L This step may vary depending on the feature being programmed. L To exit the operation, press {i c } . Note: L In the following table, < > indicates the default settings...

Programming 25 *2 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.To turn this feature on, select “ Caller ID ” . To turn this feature off, select “ Manual ” . (Caller ID subscribers only) To use this feature, se...

Programming 26 Special programming Alarm An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset. Important: L Set the date and time beforehand (page 14). 1 8 i { # }{ 7 }{ 2 }{ 0 } 2 {V} / {^} : Select the desired alarm option. i M 3 Enter the desired date and...

Programming 27 Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls.When a call is received, the unit does not ring while the caller is being identified. If the phone number matc...

Programming 28 (for example, _ is displayed even when the handset is near the base unit), re-register the handset. 1 Handset: 8 i { # }{ 1 }{ 3 }{ 0 } 2 Base unit: Proceed with the operation for your model. ■ KX-TG5511/KX-TG6511/KX-TG6512/KX-TG6513/KX-TG6519 Press and hold {x} for about 5 seconds. (...

Caller ID Service 29 Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/telephone company for details. Caller ID features When an outside call is being received, the caller’s phon...

Answering System 31 Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone.You can also set the unit to play a greeting message but not to record caller messages by selecting “ Greeting Only ” as the recording time setting (page 36). Im...

Answering System 32 Greeting message When the unit answers a call, a greeting message is played to callers.You can use either:– your own greeting message– a pre-recorded greeting message Recording your greeting message1 8 i { # }{ 3 }{ 0 }{ 2 } 2 {V} / {^} : “ Yes ” i M 3 After a beep sounds, hold t...

Answering System 33 Erasing all messages Press { 4 } 2 times while the unit is not in use. Listening to messages using the handset When new messages have been recorded, u is displayed on the handset with the total number of new messages. 1 To listen to new messages: 8 i { # }{ 3 }{ 2 }{ 3 } To liste...

Answering System 34 Erasing all messages1 8 i { # }{ 3 }{ 2 }{ 5 } 2 {V} / {^} : “ Yes ” i M i {i c } Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The unit’s voice guidance prompt...

Answering System 35 *1 If pressed within the first 5 seconds of a message, the previous message is played. Turning on the answering system remotely If the answering system is off, you can turn it on remotely. 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. L A long b...

Answering System 36 If your service provider/telephone company cannot do this:– Set this unit’s “ Number of Rings ” setting so that this unit’s answering system answers calls before the voice mail service of your service provider/telephone company does. It is necessary to check the number of rings r...

Voice Mail Service 37 Voice mail service Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone company’s voice mail system answers calls for you when you are unavailable to answer the phon...

Intercom/Locator 38 Intercom Intercom calls can be made between handsets. Note: L If you receive an outside call while talking on the intercom, you hear 2 tones. To answer the call, press {i c } , then press {C} . L When paging the handset, the paged handset beeps for 1 minute. Making an intercom ca...

Useful Information 39 Character entry The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. The characters that can be entered depend on the character entry mode (page 39).– Press { < } or { > } to move the cursor left or right. – Press d...

Useful Information 40 Numeric entry table (0-9) Arabic character table ( ) L When you select Arabic as the display language, Arabic character table is available. Persian character table ( ) L When you select Persian as the display language, Persian character table is available. Extended character ta...

Useful Information 41 Error messages If the unit detects a problem, one of the following messages is shown on the display. *1 KX-TG6521*2 KX-TG6512/KX-TG6513 Display message Cause/solution Base no power or No link. Reconnect AC adaptor. L The handset has lost communication with the base unit. Move c...

Useful Information 42 Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the handset. General use Programmable settings Problem Cause/so...

Useful Information 43 *1 KX-TG6521 Battery recharge Making/answering calls, intercom I cannot activate the eco mode. L You cannot set eco mode when you set the repeater mode “ On ” . If required, set the repeater mode to “ Off ” (page 28). I cannot register a handset to a base unit. L The maximum nu...

Useful Information 45 Caller ID Answering system (KX-TG6521) Problem Cause/solution Caller information is not displayed. L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. L If your unit is connected to any additional telephone equipment, remove...

Useful Information 46 Liquid damage Caution: L To avoid permanent damage, do not use a microwave oven to speed up the drying process. I cannot operate the answering system remotely. L The remote access code is not set. Set the remote access code (page 34). L You are entering the wrong remote access ...

Index 47 Index A Alarm: 26 Answering calls: 16 Answering system: 31 Call screening: 31 Erasing messages: 32 , 33 , 35 Greeting message: 32 Greeting only: 36 Listening to messages: 32 , 33 , 34 Number of rings: 35 Recording time: 36 Remote access code: 34 Remote operation: 34 Turning on/off: 31 , 33 ...

PNQX2495ZA CC0610DG0 (A) For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction,...